The 2011 GMC Trucks Acadia sits in the era when full-size family crossovers were expected to handle daily hauling, highway travel, and a more upscale driving experience without giving up three-row practicality. That matters at tire time, because this Acadia uses modern radial fitments in three different sizes depending on trim and wheel package. The key sizes are 255/65R18, 255/60R19, and 255/55R20, all with very similar overall diameter but different rim diameters. The real decision is confirming the exact sub-model and wheel setup first, then choosing the right radial tire style for road use, ride character, and the look you want to keep.
Which Tire Size Is Right for The 2011 GMC Trucks Acadia
The 2011 GMC Trucks Acadia uses three primary tire sizes, and the right one depends on the sub-model and wheel diameter already on the vehicle. All three are radial sizes with closely matched overall dimensions, but they fit 18-inch, 19-inch, or 20-inch rims. Before choosing a tire, confirm both the exact trim and the actual wheel diameter, especially if the Acadia has changed hands or has had wheels replaced.
255/55R20 is a metric radial size where 255 is the nominal section width in millimeters, 55 is the aspect ratio, R identifies radial construction, and 20 is the required rim diameter in inches. On the 2011 GMC Trucks Acadia, this size is part of the larger-wheel fitment used on certain trims. Its lower profile compared with the other Acadia sizes gives buyers a different wheel-and-tire presentation while keeping the vehicle in the correct overall tire family. This size should be chosen only after confirming that the Acadia is equipped with 20-inch wheels.
255/65R18 follows the same metric radial sizing system, with a 255-millimeter nominal section width, a 65-series profile, radial construction, and an 18-inch rim requirement. For the 2011 GMC Trucks Acadia, this size belongs to the 18-inch wheel fitment used on certain sub-models rather than across the full lineup. It carries a taller sidewall look than the 20-inch option while staying very close in overall diameter to the other Acadia sizes. This makes wheel confirmation especially important before replacing only one tire or ordering a full set.
255/60R19 is also a metric radial size, combining a 255-millimeter nominal section width with a 60-series profile on a 19-inch rim. On the 2011 GMC Trucks Acadia, this size serves a specific trim application rather than the full model range. Its proportions place it between the 18-inch and 20-inch fitments, which is why it is important not to assume that another Acadia tire size will match the same wheel. Buyers should verify the vehicle's existing 19-inch wheel setup before selecting this size for routine road use.
Tire fitment for the 2011 GMC Trucks Acadia varies by sub-model, so trim identification matters before a tire is selected. Some versions share a size, while others use a different rim diameter and corresponding radial fitment.
1
2011 GMC Trucks Acadia Denali
The 2011 GMC Trucks Acadia Denali uses a single radial tire fitment tied to its 20-inch wheel setup. For replacement, the main concern is staying with the correct 20-inch size and then choosing a tire that suits the Acadia's appearance and normal driving use.
The 2011 GMC Trucks Acadia SL appears with either an 18-inch or 20-inch radial tire fitment. That makes wheel confirmation the first step, especially on a used vehicle, before comparing tire options within the correct size.
The 2011 GMC Trucks Acadia SLE also uses more than one radial tire size depending on wheel equipment. Tire selection starts with confirming whether the vehicle carries the 18-inch or 20-inch setup, then matching the replacement size to that wheel.
The 2011 GMC Trucks Acadia SLT uses either a 19-inch or 20-inch radial fitment. Because those sizes are close in overall dimension but require different wheels, the safest path is to verify the existing rim diameter before choosing replacements.
The tire sizes listed on this page assume factory-standard vehicle configuration. The following modifications may affect tire fitment and are not reflected in this guide:
Suspension changes (lowering, lift kits, spring replacements)
Body alterations (fender modifications, custom bodywork)
If your vehicle has been modified from factory specifications, verify tire clearance before purchase.
Frequently Asked Questions
These 2011 GMC Trucks Acadia tire FAQs focus on the sizes that fit each trim, the different rim diameters used across the lineup, and the practical checks that matter before replacing tires on a daily-driven or recently purchased Acadia.
Tire Size & Fitment
What tire size fits a 2011 GMC Trucks Acadia?
The 2011 GMC Trucks Acadia uses three primary tire sizes: 255/65R18, 255/60R19, and 255/55R20. All three are radial fitments, and the correct one depends on the specific sub-model and wheel package already on the vehicle.
The sizes are close in overall diameter, but they are not the same fitment because each one is built for a different rim diameter. A buyer should confirm the trim level and physically check whether the Acadia has 18-inch, 19-inch, or 20-inch wheels before selecting replacement tires.
What size rim does a 2011 GMC Trucks Acadia use?
A 2011 GMC Trucks Acadia can use 18-inch, 19-inch, or 20-inch rims, depending on the sub-model and wheel setup. Those rim diameters correspond to the three factory tire sizes used on this model year.
Because more than one wheel diameter was used, rim size should be confirmed before ordering tires, even if the vehicle's trim seems obvious. A quick check of the current tire sidewall or the wheel itself can prevent choosing a size that matches overall diameter but does not fit the rim.
Do all 2011 GMC Trucks Acadia sub-models use the same tire size?
No, the 2011 GMC Trucks Acadia does not use one tire size across every sub-model. Denali uses 255/55R20, SL and SLE can use 255/65R18 or 255/55R20, and SLT can use 255/60R19 or 255/55R20.
That variation means trim level alone may not be enough if the vehicle has had wheel changes over time. The practical approach is to identify the sub-model and then verify the current wheel diameter so the replacement tire matches both the rim and the intended Acadia configuration.
Choosing the Right Tire
What should I consider when choosing a 2011 GMC Trucks Acadia tire?
Start with the correct size for the Acadia's wheel and sub-model: 255/65R18, 255/60R19, or 255/55R20. Since all three are modern radial fitments with similar overall dimensions, the first goal is matching the tire to the existing rim diameter rather than comparing profile alone.
After size is confirmed, look at how the vehicle is used. Daily commuting, family travel, and occasional long highway drives all place value on a tire that matches the Acadia's wheel setup cleanly and maintains proper clearance, load support, and consistent ride behavior.
How do I choose between the available 2011 GMC Trucks Acadia tire sizes?
The three Acadia tire sizes are not interchangeable choices for the same wheel. 255/65R18 belongs on an 18-inch rim, 255/60R19 on a 19-inch rim, and 255/55R20 on a 20-inch rim, so the wheel diameter determines which size belongs on the vehicle.
A buyer should treat the current wheel setup as the starting point, not the overall diameter numbers alone. If the Acadia has aftermarket wheels or a previous owner changed trims or wheel packages, check the sidewall marking and the actual rim size before selecting a replacement tire.
What rim-fitment details matter when choosing tires for a 2011 GMC Trucks Acadia?
The most important rim-fitment detail is wheel diameter, because the 2011 GMC Trucks Acadia uses 18-inch, 19-inch, and 20-inch tire-and-wheel combinations. Even though the three tire sizes are close in outside diameter, each one is built to mount on a different rim size.
It also helps to inspect the current wheels for originality or later changes before replacing a full set. An Acadia with swapped wheels, replacement rims, or mixed tires can create confusion, so matching the tire size to the actual wheel on the vehicle is more important than relying on trim name alone.
Restoration & Appearance
Does correct tire fitment matter for a 2011 GMC Trucks Acadia restoration or refresh?
Yes. Even on a newer vehicle like the 2011 GMC Trucks Acadia, correct tire fitment helps preserve the intended stance, wheel-to-tire proportion, and overall presentation of the SUV. Using the proper 18-inch, 19-inch, or 20-inch size keeps the look aligned with the wheel setup the vehicle carries.
That matters on a clean refresh just as much as on a collector-minded preservation project. Before replacing tires for appearance reasons, confirm whether the Acadia still has its original wheel diameter or has been changed, since the right visual result depends on matching the size to the actual wheels.
How does tire profile affect the appearance of a 2011 GMC Trucks Acadia?
Tire profile changes the visual balance between sidewall height and wheel diameter. On the 2011 GMC Trucks Acadia, 255/65R18 gives more sidewall presence, 255/60R19 sits in the middle, and 255/55R20 creates a shorter-sidewall look around a larger wheel.
Those differences are part of why the Acadia can look noticeably different from one trim to another even when the overall tire diameter stays close. The right choice is not about forcing one profile onto every vehicle, but about matching the replacement tire to the wheel size already in place.
Fitment, Maintenance & Road Use
Can modifications affect tire fitment on a 2011 GMC Trucks Acadia?
Yes. Wheel changes, aftermarket rims, suspension alterations, and even previous trim conversions can affect tire fitment on a 2011 GMC Trucks Acadia. Since this model already uses three different rim diameters from the factory, modifications can make it even more important to verify the actual setup.
An Acadia with non-original wheels may need extra attention to wheel diameter, tire size, and clearance at full steering lock. Checking the sidewall markings, measuring the wheels, and inspecting fender and suspension space can help avoid choosing a tire that does not match the vehicle's current configuration.
What should I inspect before driving a 2011 GMC Trucks Acadia on new tires?
Before road use, inspect inflation pressure, valve stems, lug torque, and the overall condition of the wheels. It also makes sense to confirm that all four tires match in size and that the new set is the correct 18-inch, 19-inch, or 20-inch fitment for the Acadia.
A short test drive should include listening for rubbing, checking steering feel, and looking for any sign of contact at the fender liner or suspension. On a vehicle that has been sitting or recently purchased, an alignment and a basic brake-and-suspension check are also worthwhile.
How often should tires on a 2011 GMC Trucks Acadia be inspected?
Tires on a 2011 GMC Trucks Acadia should be inspected regularly, not just when they look low. A quick visual check before longer trips and a more careful inspection at routine service intervals helps catch uneven wear, cuts, punctures, bulges, and pressure loss early.
Low-use vehicles deserve the same attention because age and storage can matter as much as mileage. Looking over the sidewalls for cracking, checking tread wear across the full width, and making sure all four tires still match the proper Acadia size can prevent problems before highway use.
