The 2011 Ferrari 612 Scaglietti is a front-engine V12 grand tourer built for high-speed comfort as much as outright prestige, and its tire fitment reflects that dual purpose. This is a car where wheel and tire choice directly shape stance, ride, and road manners, especially because more than one front and rear size combination appears across the model. All primary fitments here are radial, spanning 18-, 19-, and 20-inch rim diameters, with staggered front and rear sizing depending on configuration. Available choices lean modern and performance-oriented, with blackwall options most common and additional sidewall treatments appearing in some rear 20-inch offerings. The key first step is confirming the exact wheel setup on the car before comparing tire series and specifications.
Which Tire Size Is Right for The 2011 Ferrari 612 Scaglietti
The 2011 Ferrari 612 Scaglietti uses five primary tire sizes, and the correct choice depends on whether you are looking at a front or rear position and which wheel package is on the car. Rim diameter is the first thing to confirm, since this fitment spans 18-inch, 19-inch, and 20-inch wheels, and the front and rear sizes are staggered rather than interchangeable.
Fit(s): (Run-Flat Tire Option) Front and Base Front
Construction: Radial|Rim: 19 in
A 245/40R19 tire is a metric radial size with a 245-millimeter nominal section width, a 40-series profile, and fitment for a 19-inch rim. On the 2011 Ferrari 612 Scaglietti, this is a front tire size used with a modern radial construction and should be considered as part of a staggered setup rather than as a universal all-around fitment. Available choices in this size come from BFGoodrich across g-Force Sport Comp 2, g-Force Comp 2 AS, and g-Force Phenom T/A lines, all in blackwall form. This size makes sense when the car is equipped with 19-inch front wheels and you want to compare series character within that exact format.
Fit(s): (Run-Flat Tire Option) Front and Base Front
Construction: Radial|Rim: 18 in
A 245/45R18 tire uses the same 245-millimeter nominal width but with a taller 45-series sidewall on an 18-inch rim. For the 2011 Ferrari 612 Scaglietti, it serves as a front tire size and keeps the vehicle within a fully radial fitment while pointing to a different wheel package than the 19- and 20-inch fronts. Product choices include BFGoodrich and Nitto offerings, mainly in blackwall styling, with series such as g-Force Comp 2 AS, g-Force Sport Comp 2, g-Force Phenom T/A, and NT555 G2. Choosing this size starts with confirming that the car actually wears 18-inch front wheels and matching the tire to the intended use.
A 285/40R19 tire is a wider metric radial rear size with a 285-millimeter nominal section width, a 40-series profile, and a 19-inch rim diameter. On the 2011 Ferrari 612 Scaglietti, this size belongs in the rear portion of a staggered fitment and should be paired with the correct front size for the wheel setup on the car. The practical importance here is less about sidewall variety and more about maintaining the intended rear-wheel sizing relationship on 19-inch wheels. Use this size when the car is equipped with 19-inch rear rims and the overall front-to-rear package has been confirmed.
A 245/35R20 tire is a low-profile metric radial front size with a 245-millimeter nominal width and a 20-inch rim diameter. For the 2011 Ferrari 612 Scaglietti, it represents the front half of a 20-inch staggered arrangement, so it should be evaluated together with the matching rear size rather than in isolation. BFGoodrich and Nitto offer this size, primarily in blackwall form, across series including g-Force Sport Comp 2, g-Force Comp 2 AS, g-Force Phenom T/A, and NT555 G2. This size is the right place to start when the car already has 20-inch front wheels and you are comparing tire series within that setup.
A 285/35R20 tire is a wide, low-profile metric radial sized for a 20-inch rear wheel. On the 2011 Ferrari 612 Scaglietti, it functions as the rear companion to a staggered 20-inch package, making correct wheel-position matching especially important. This size brings the broadest visible product variety, with BFGoodrich, Nitto, and Pro-Trac offerings plus blackwall, raised white letter, and redline sidewall treatments across g-Force Comp 2 AS, NT555 G2, and Street Pro III series. It is the size to evaluate when the car uses 20-inch rear wheels and appearance choice matters alongside basic fitment.
Tire fitment on the 2011 Ferrari 612 Scaglietti varies by wheel setup and by front-versus-rear position, so confirming the exact sub-model and axle location matters before selecting a tire. Some covered configurations share sizes, but the full fitment range spans three rim diameters and several staggered combinations.
1
2011 Ferrari 612 Scaglietti (Run-Flat Tire Option) Front
The run-flat tire option front fitment uses either an 18-inch or 19-inch radial front size, making wheel-diameter confirmation the first step before comparing tire choices. Once that is settled, the decision shifts to selecting the right product series and making sure it matches the rear setup already on the car.
2011 Ferrari 612 Scaglietti (Run-Flat Tire Option) Rear
The run-flat tire option rear fitment centers on a 19-inch radial rear size, which needs to be treated as part of a staggered arrangement rather than a standalone selection. Rear tire choice should be matched to the corresponding front wheel package so the overall setup remains consistent.
The base front fitment spans 18-inch, 19-inch, and 20-inch radial sizes, so this is the sub-model where wheel verification matters most. After the front rim diameter is confirmed, product choice becomes a matter of selecting the desired tire series and staying aligned with the rear size already fitted.
The base rear fitment uses either a 19-inch or 20-inch radial rear size, depending on the wheel package installed on the car. That makes rear wheel diameter the key checkpoint before considering sidewall presentation, available brands, or series differences where those choices exist.
The tire sizes listed on this page assume factory-standard vehicle configuration. The following modifications may affect tire fitment and are not reflected in this guide:
Suspension changes (lowering, lift kits, spring replacements)
Body alterations (fender modifications, custom bodywork)
If your vehicle has been modified from factory specifications, verify tire clearance before purchase.
Best 2011 Ferrari 612 Scaglietti Tires for Sale
Available tires for the 2011 Ferrari 612 Scaglietti are entirely radial and center on BFGoodrich, Nitto, and Pro-Trac offerings. Depending on size, buyers can compare series such as g-Force Comp 2 AS, g-Force Sport Comp 2, g-Force Phenom T/A, NT555 G2, and Street Pro III, with blackwall most common and added RWL or redline choices in 285/35R20.
Common questions for the 2011 Ferrari 612 Scaglietti usually center on staggered front and rear sizing, 18-inch versus 19-inch versus 20-inch wheel fitment, and how to choose among the available radial tire series and sidewall treatments.
Tire Size & Fitment
What tire size fits a 2011 Ferrari 612 Scaglietti?
The 2011 Ferrari 612 Scaglietti uses several staggered radial tire sizes rather than one universal fitment. Front sizes include 245/45R18, 245/40R19, and 245/35R20, while rear sizes include 285/40R19 and 285/35R20. The correct combination depends on the wheel package and whether you are selecting a front or rear tire.
The most important next step is confirming the actual wheel diameter on the car before ordering tires. A 612 Scaglietti can wear 18-inch, 19-inch, or 20-inch wheels in these fitments, and front and rear sizes are not interchangeable. If the car has been changed from its original wheel setup, check both axle positions individually.
What size rim does a 2011 Ferrari 612 Scaglietti use?
A 2011 Ferrari 612 Scaglietti can use 18-inch, 19-inch, or 20-inch rims, depending on the wheel and tire combination on the car. The front fitments appear in 18, 19, and 20 inches, while the rear fitments appear in 19 and 20 inches as part of a staggered arrangement.
That range makes wheel-diameter verification more important than simply matching the make and model. Look at the actual wheel and current tire markings at both ends of the car, since the front and rear may differ. Once rim diameter is confirmed, it becomes much easier to narrow the correct size and compare the available tire series.
Why does the 2011 Ferrari 612 Scaglietti have more than one tire size?
The 2011 Ferrari 612 Scaglietti has more than one tire size because its fitment varies by wheel package and by axle position. It uses staggered sizing, with narrower front tires and wider rear tires, and the covered combinations include 18-inch, 19-inch, and 20-inch wheel diameters.
That means tire selection starts with identifying both the front and rear setup already on the car, not just the model name. A front 245 size and a rear 285 size may both be correct, but only in the proper rim diameter. Any wheel change, suspension change, or replacement of only one axle should be checked carefully before mixing sizes.
Choosing the Right Tire
What should I consider when choosing a 245/40R19 tire for a 2011 Ferrari 612 Scaglietti?
For a 2011 Ferrari 612 Scaglietti using 245/40R19 at the front, start with exact size, radial construction, and 19-inch wheel compatibility. In this size, the available choices come from BFGoodrich in blackwall form across g-Force Sport Comp 2, g-Force Comp 2 AS, and g-Force Phenom T/A series.
The practical difference is not basic fitment but which type of driving and presentation best suits the car. Compare the series character, rim-width specification, and any load details tied to a given product, then make sure the selected front tire still matches the rear wheel package on the car. Keeping the setup coordinated matters as much as choosing the brand.
What brands offer tires for the 2011 Ferrari 612 Scaglietti?
Tires for the 2011 Ferrari 612 Scaglietti are available from BFGoodrich, Nitto, and Pro-Trac, depending on the size. BFGoodrich appears across several front and rear fitments, Nitto is available in selected 18-inch and 20-inch sizes, and Pro-Trac appears in the 285/35R20 rear size.
Brand comparison should happen only after the correct size and wheel diameter are confirmed. Some sizes offer only one brand family, while others provide a broader mix of series and sidewall treatments. On this Ferrari, the better question is often which brand is available in the exact front or rear size already on the car.
What sidewall styles are available for 2011 Ferrari 612 Scaglietti tires?
Blackwall is the main sidewall style available for the 2011 Ferrari 612 Scaglietti across most front and rear sizes. In 285/35R20, additional rear tire choices include raised white letter and redline sidewall treatments through Pro-Trac Street Pro III offerings.
That means sidewall style is partly controlled by the wheel package and the exact axle size you need. If the goal is a clean modern look, blackwall is the broadest path. If the car uses 20-inch rear wheels and a more customized visual treatment is desired, the rear 285/35R20 options open up more appearance choice.
Restoration & Appearance
Which tire should I choose for a period-style 2011 Ferrari 612 Scaglietti?
A period-style approach on a 2011 Ferrari 612 Scaglietti usually begins with preserving the wheel diameter and staggered sizing already associated with the car. Since all covered fitments are modern radial sizes, the appearance decision is less about vintage construction and more about selecting a tire series and sidewall treatment that suits the car's grand touring character.
For a restrained presentation, blackwall options align naturally with the modern performance look found across most sizes. Owners seeking a more individualized rear appearance may look at the 285/35R20 choices with redline or raised white letter styling. When exact originality matters, wheel and tire presentation should be checked against marque-specific historical references.
Does correct tire fitment matter for a 2011 Ferrari 612 Scaglietti restoration?
Correct tire fitment matters on a 2011 Ferrari 612 Scaglietti because the car relies on specific front and rear size relationships across different wheel diameters. Using the wrong front or rear size can change the visual balance of the car and may also create avoidable clearance or compatibility issues.
A restoration-minded approach should preserve the proper staggered format before focusing on brand or sidewall style. That means verifying whether the car is on 18-inch, 19-inch, or 20-inch wheels and selecting tires that match that setup at both axles. Keeping those fundamentals correct gives the finished car a more resolved and intentional appearance.
Fitment, Maintenance & Road Use
Can modifications affect tire fitment on a 2011 Ferrari 612 Scaglietti?
Yes, modifications can affect tire fitment on a 2011 Ferrari 612 Scaglietti. Wheel changes, suspension alterations, ride-height adjustments, or body modifications can all change the clearance available for the car's staggered front and rear tire sizes, especially when moving between 18-inch, 19-inch, and 20-inch wheel packages.
Even when the tire size itself matches one of the known fitments, the actual wheel width and overall setup still need to be checked. Confirm steering clearance at the front, fender and suspension clearance at both ends, and the relationship between the front and rear tires. Modified cars should always be measured rather than assumed.
What should I inspect before driving a 2011 Ferrari 612 Scaglietti on new tires?
Before driving a 2011 Ferrari 612 Scaglietti on new tires, inspect tire pressure, bead seating, valve stems, lug torque, and basic clearance at full steering lock and normal ride height. It is also worth confirming that the front and rear sizes match the wheel diameters on the car and that the staggered arrangement has not been mixed.
A short, careful first drive can reveal vibration, rubbing, or other setup issues before they become a bigger problem. Recheck inflation after the tires have settled in service, and keep an eye on any unusual wear pattern early on. On a high-performance grand tourer, small fitment issues are easier to correct when caught immediately.
What should I check before a longer drive in a 2011 Ferrari 612 Scaglietti?
Before a longer drive in a 2011 Ferrari 612 Scaglietti, check tire pressure, tread condition, sidewall condition, and any sign of cuts, bulges, or air loss. On a car with staggered radial sizing, it is also smart to confirm that each corner still carries the intended size and that no front or rear replacement has introduced a mismatch.
Collector and low-use cars deserve extra attention because age can matter as much as tread depth. Look over the tires after the car has been sitting, and inspect the wheels for damage or signs of leakage around the valve or bead area. A few minutes of inspection can prevent a minor issue from spoiling a longer trip.
