The 2011 Aston Martin Rapide brought Aston Martin grand touring character into a sleek four-door shape, blending high-speed road manners with the long-hood, low-roof proportions buyers expect from the marque. It is a modern performance car, but one with a strong emphasis on presence and balance rather than stripped-down track-car minimalism. Tire fitment follows that purpose with a staggered radial setup: 245/40R20 in front and 295/35R20 in the rear, both on 20-inch rims. Available choices include blackwall performance radials along with raised white letter and redline treatments in the front size. The key is matching the correct front and rear sizes while keeping wheel width, appearance, and intended road use in mind.
Which Tire Size Is Right for The 2011 Aston Martin Rapide
The 2011 Aston Martin Rapide uses two tire sizes, both in radial construction on 20-inch rims. The front and rear fitments are different, so the first step is confirming position on the car before selecting a tire. Once that is established, the decision shifts to brand, sidewall treatment where available, and checking wheel-width compatibility on the specific wheel setup.
245/40R20 is a modern metric radial size in which 245 identifies nominal section width in millimeters, 40 is the aspect ratio, R designates radial construction, and 20 is the rim diameter in inches. On the 2011 Aston Martin Rapide, this is the front tire size and it reflects the car's low-profile, performance-oriented fitment. Available choices include BFGoodrich, Nitto, and Pro-Trac products, with blackwall, raised white letter, and redline sidewall treatments. This size is the one to evaluate when front-end appearance, steering feel, and wheel-width compatibility are the main concerns.
295/35R20 is a modern metric radial size with a 295-millimeter nominal section width, a 35-series profile, radial construction, and a 20-inch rim diameter. On the 2011 Aston Martin Rapide, this is the rear tire size, giving the car the wider back-tire footprint expected from a staggered grand touring performance setup. Nitto offers this size in the NT555 G2 series with a blackwall presentation. This is the size to focus on when preserving the Rapide's intended front-to-rear balance and confirming that the rear wheels match the tire's requirements.
Rapide fitment is straightforward in one sense and position-specific in another. The covered Base front and Base rear applications do not share the same tire size, so identifying whether the tire is for the front or rear of the car matters before any comparison is made.
1
2011 Aston Martin Rapide Base Front
The 2011 Aston Martin Rapide Base Front uses the 245/40R20 radial size on a 20-inch rim. Tire selection here centers on the correct front fitment first, then on comparing available brands and sidewall treatments to suit the car's appearance and road-use priorities.
The 2011 Aston Martin Rapide Base Rear uses the wider 295/35R20 radial size on a 20-inch rim. That makes rear fitment less about appearance variety and more about maintaining the proper staggered setup, wheel compatibility, and rear tire selection for the car's intended balance.
The tire sizes listed on this page assume factory-standard vehicle configuration. The following modifications may affect tire fitment and are not reflected in this guide:
Suspension changes (lowering, lift kits, spring replacements)
Body alterations (fender modifications, custom bodywork)
If your vehicle has been modified from factory specifications, verify tire clearance before purchase.
Best 2011 Aston Martin Rapide Tires for Sale
Available 2011 Aston Martin Rapide tires center on the staggered 245/40R20 front and 295/35R20 rear sizes, with choices from BFGoodrich, Nitto, and Pro-Trac. Buyers can compare tire series and sidewall presentation, with blackwall offered in both sizes and RWL or redline available in the front size.
Owners of a 2011 Aston Martin Rapide usually need clear answers on staggered tire sizing, 20-inch rim fitment, brand and sidewall choices, and what to inspect before putting a modern grand touring car back on the road.
Tire Size & Fitment
What tire size fits a 2011 Aston Martin Rapide?
The 2011 Aston Martin Rapide uses a staggered tire setup with 245/40R20 in the front and 295/35R20 in the rear. Both are radial tire sizes mounted on 20-inch rims, so this car does not use the same tire size at all four corners.
That staggered layout means the first question is tire position, not just year and model. Mixing up the front and rear sizes can upset appearance and fitment, so check the wheel location, confirm the wheel dimensions already on the car, and make sure any replacement preserves the intended front-to-rear size relationship.
What size rim does a 2011 Aston Martin Rapide use?
The 2011 Aston Martin Rapide uses 20-inch rims with both of its primary tire sizes. The front 245/40R20 and rear 295/35R20 fitments are both built around the same rim diameter, even though the tire widths and aspect ratios differ.
Rim diameter is only part of the fitment picture on a staggered setup. Tire choice should also take actual wheel width into account, especially if the car has been changed from its original wheel package. A quick check of front and rear wheel specs helps prevent mounting the correct diameter tire on a wheel that is unsuitable in width.
Why does the 2011 Aston Martin Rapide have more than one tire size?
The 2011 Aston Martin Rapide has more than one tire size because it uses a staggered fitment. The front position takes 245/40R20, while the rear uses the wider 295/35R20, giving the car different tire dimensions at each end.
For the buyer, that means tire selection is tied to axle position rather than trim complexity. The practical step is confirming whether a tire is being replaced as a front pair, rear pair, or complete set, then matching those sizes to the actual wheels on the car so width, profile, and clearance remain appropriate.
Choosing the Right Tire
What should I consider when choosing a 245/40R20 and 295/35R20 tire setup for a 2011 Aston Martin Rapide?
Start with the correct staggered sizes: 245/40R20 for the front and 295/35R20 for the rear. From there, compare radial tire series, wheel-width suitability, sidewall style where offered, and useful product details such as load capacity or weight when those specifications matter to your intended use.
A Rapide used as a refined road car may call for different priorities than one built around visual presentation. Front-side appearance choices are broader than rear choices, so many buyers balance presentation on the front axle with straightforward performance fitment at the rear. Keeping the pairings consistent side to side matters as much as choosing the right brand.
What sidewall styles are available for 2011 Aston Martin Rapide tires?
Blackwall is available in both Rapide sizes, while the 245/40R20 front size also appears with raised white letter and redline sidewall treatments. Those added appearance options are tied to specific front-size products rather than to the full front-and-rear staggered combination.
Sidewall style affects how modern, aggressive, or custom the car looks without changing the basic size requirement. Buyers who want a more understated presentation often stay with blackwall, while a more personalized appearance may point toward RWL or redline on the front size. The rear still needs to remain in the correct 295/35R20 fitment.
What brands offer tires for the 2011 Aston Martin Rapide?
2011 Aston Martin Rapide tire choices include BFGoodrich, Nitto, and Pro-Trac. The 245/40R20 front size has the broadest brand spread, while the 295/35R20 rear size is represented here by Nitto in the NT555 G2 series.
Brand choice should be considered alongside the exact size position, tire series, and sidewall presentation instead of in isolation. A buyer looking at the full staggered setup may find that front options allow more styling variation, while the rear selection keeps the focus on maintaining the proper size and compatible wheel setup.
Fitment, Maintenance & Road Use
Can modifications affect tire fitment on a 2011 Aston Martin Rapide?
Yes, modifications can affect tire fitment on a 2011 Aston Martin Rapide even when the nominal tire sizes remain 245/40R20 front and 295/35R20 rear. Aftermarket wheels, altered offsets, suspension changes, or body modifications can all change the space available around the tire.
A Rapide that no longer has its original wheel setup deserves a careful check of front and rear wheel width, brake clearance, steering clearance, and fender space before replacement tires are chosen. Position-specific fitment matters on this car, so it helps to inspect each axle separately rather than assuming the current setup matches standard dimensions.
What should I inspect before driving a 2011 Aston Martin Rapide on new tires?
Before driving a 2011 Aston Martin Rapide on new tires, inspect the wheels for damage, confirm that the front and rear sizes are mounted in the correct positions, and check inflation, valve stems, and overall installation quality. A quick look for rubbing or uneven clearance is also worthwhile.
Road readiness goes beyond fresh tread, especially on a low-profile 20-inch setup. Tire pressure should be checked cold, and the first drive should include attention to vibration, pull, or contact under steering and suspension movement. It is also smart to confirm alignment condition if the previous tires showed irregular wear.
How often should tires on a 2011 Aston Martin Rapide be inspected?
Tires on a 2011 Aston Martin Rapide should be inspected regularly, not just when tread looks low. Frequent checks for pressure loss, uneven wear, cuts, bulges, and sidewall damage are especially important on a performance-oriented staggered setup using low-profile 20-inch radial tires.
Cars that spend time stored can develop age-related issues even with limited mileage, so appearance alone is not enough. Inspect the front and rear tires separately, since they do different jobs and may wear differently. A brief check before longer drives helps catch problems early and protects both ride quality and fitment confidence.
