The 2011 Aston Martin DBS sits at the sharp end of Aston Martin’s grand touring tradition, blending hand-finished luxury with the kind of speed and presence that makes tire choice more than a routine maintenance decision. On this car, fitment is built around a staggered 20-inch radial setup, with 245/35R20 at the front and 295/30R20 at the rear. That means the first priority is preserving the front-to-rear sizing relationship rather than treating all four corners the same. Available choices center on modern blackwall radial performance tires, so the real decision comes down to selecting the right series and specifications for the way the car is driven and maintained.
Which Tire Size Is Right for The 2011 Aston Martin DBS
The 2011 Aston Martin DBS uses two primary tire sizes, and they serve different positions on the car rather than different trim levels. Both are radial tires on 20-inch rims, so the key is confirming whether you are replacing a front or rear tire and then matching the staggered setup correctly. Once that is established, the decision shifts to comparing the available tire series and fitment details within the proper size.
A 245/35R20 tire uses a 245-millimeter nominal section width, a 35-series aspect ratio, radial construction, and a 20-inch rim. On the 2011 Aston Martin DBS, this size is used at the front, where maintaining the intended staggered fitment is important to steering response and overall balance. Available options in this size include BFGoodrich and Nitto blackwall radial tires, with series such as g-Force Sport Comp 2, g-Force Comp 2 AS, g-Force Phenom T/A, and NT555 G2. This is the size to evaluate when replacing front tires or refreshing the complete front half of the car’s tire setup.
A 295/30R20 tire uses a 295-millimeter nominal section width, a 30-series aspect ratio, radial construction, and a 20-inch rim. On the 2011 Aston Martin DBS, this size belongs at the rear, where the wider footprint is part of the car’s staggered tire arrangement. Keeping the correct rear size matters because it preserves the intended relationship between front and rear fitment instead of narrowing the setup into a square arrangement. This is the size to confirm when replacing rear tires, checking wheel fitment, or making sure the car still carries the proper rear-wheel tire specification.
Tire fitment on the 2011 Aston Martin DBS is consistent across the covered DBS Base and DBS Volante models, but it remains a position-specific setup. Checking the exact front or rear application matters most, since the car uses different sizes at each end even when the overall model fitment stays the same.
1
2011 Aston Martin DBS Base Front
The 2011 Aston Martin DBS Base Front uses the 245/35R20 radial size on a 20-inch wheel position. Tire selection here centers on choosing the right front tire series and keeping the proper staggered relationship with the rear rather than trying to match all four corners to one size.
The 2011 Aston Martin DBS Base Rear uses the 295/30R20 radial size on a 20-inch wheel position. That makes rear fitment a separate decision from the front, especially when replacing tires in pairs or confirming that the car still has the correct staggered wheel and tire arrangement.
The 2011 Aston Martin DBS Volante Front uses the same 245/35R20 radial size as the coupe’s front position. For tire selection, the focus stays on maintaining correct front fitment, matching the 20-inch wheel setup, and choosing an appropriate tire series for the car’s intended road use.
The 2011 Aston Martin DBS Volante Rear uses the 295/30R20 radial size at the back. That rear-specific sizing should be preserved when replacing tires, and it is worth confirming the actual wheel setup first if the car has ever been changed from its original staggered arrangement.
The tire sizes listed on this page assume factory-standard vehicle configuration. The following modifications may affect tire fitment and are not reflected in this guide:
Suspension changes (lowering, lift kits, spring replacements)
Body alterations (fender modifications, custom bodywork)
If your vehicle has been modified from factory specifications, verify tire clearance before purchase.
Best 2011 Aston Martin DBS Tires for Sale
Available 245/35R20 choices for the 2011 Aston Martin DBS include blackwall radial tires from BFGoodrich and Nitto across several performance-oriented series. The product grid is most useful for comparing tire series, rim-width compatibility, weight, and other fitment details within the correct front size.
Tire questions on a 2011 Aston Martin DBS usually come down to staggered sizing, 20-inch wheel fitment, front-versus-rear replacement, and choosing among modern radial performance tire options. The FAQs below focus on those exact decisions, along with maintenance and road-use checks for a high-performance grand touring car.
Tire Size & Fitment
What tire size fits a 2011 Aston Martin DBS?
The 2011 Aston Martin DBS uses a staggered tire setup with 245/35R20 at the front and 295/30R20 at the rear. Both are radial sizes mounted on 20-inch wheels, and the same front-to-rear sizing pattern applies to the covered DBS Base and DBS Volante configurations.
That means tire selection starts with wheel position, not just model name. Front and rear sizes are different by design, so replacing a tire requires matching the correct end of the car first. It is also wise to confirm that the car still has its intended staggered wheel arrangement if aftermarket wheels or previous tire changes are part of its history.
What size rim does a 2011 Aston Martin DBS use?
The 2011 Aston Martin DBS uses 20-inch rims with both of its primary tire sizes. The front 245/35R20 and rear 295/30R20 fitments are both built around a 20-inch wheel diameter, so rim diameter stays consistent even though the tire widths and profiles differ front to rear.
Rim diameter is only part of the fitment picture on a staggered car like the DBS. Wheel width and the actual front or rear position still need to be confirmed before choosing tires, especially if the car has changed hands or worn aftermarket wheels. Matching a 20-inch diameter alone does not make a tire suitable for either end of the car.
Do all 2011 Aston Martin DBS sub-models use the same tire size?
The covered 2011 Aston Martin DBS sub-models share the same overall staggered fitment pattern, but they do not use one identical size at all four corners. Both the DBS Base and DBS Volante use 245/35R20 at the front and 295/30R20 at the rear.
That makes the fitment straightforward by model, but still position-specific. The important check is whether the tire being replaced belongs on the front or rear axle. On a car like the DBS, mixing up those positions can upset the intended balance of the setup, so the tire size should always be matched to the correct wheel location.
Choosing the Right Tire
What should I consider when choosing a 245/35R20 tire for a 2011 Aston Martin DBS?
A 245/35R20 for the 2011 Aston Martin DBS should first be chosen as the correct front-position size on a 20-inch wheel. From there, the important comparisons are radial construction, rim-width compatibility, tire series, load-related specifications where stated, and whether the tire suits the car’s intended use as a fast road-going grand tourer.
Available choices in this size include BFGoodrich and Nitto blackwall performance tires, so the decision is less about basic fitment and more about selecting the right specification within the proper size. Checking the actual front wheel width, replacing tires in matched axle pairs when needed, and maintaining the designed staggered setup will help keep the car’s tire package consistent.
What sidewall styles are available for 2011 Aston Martin DBS tires?
The available 245/35R20 tire options for the 2011 Aston Martin DBS use a blackwall sidewall style. That keeps the appearance modern and understated, which suits the DBS’s late-model high-performance grand touring character rather than introducing a vintage-style visual treatment.
Sidewall style may be simple here, but it still matters as part of the car’s overall presentation. Once the correct front size is confirmed, the real comparisons move to tire series and fitment details rather than decorative sidewall variations. Keeping the same general sidewall presentation across a set also helps the car maintain a balanced appearance from front to rear.
What brands offer tires for the 2011 Aston Martin DBS?
The available 245/35R20 tire choices for the 2011 Aston Martin DBS include BFGoodrich and Nitto. Within those brands, the front-size options span several radial performance series, including BFGoodrich g-Force Sport Comp 2, g-Force Comp 2 AS, g-Force Phenom T/A, and the Nitto NT555 G2.
Brand alone should not be the only deciding factor on a staggered car like the DBS. It helps to compare the exact tire series, wheel-width suitability, and any stated load-related details while keeping the front application in mind. Buyers replacing more than one tire should also think about how the selected tire will pair with the tires already installed on the other axle.
Restoration & Appearance
Which tire should I choose for a period-style 2011 Aston Martin DBS?
A period-style approach on a 2011 Aston Martin DBS starts with preserving the original staggered sizing concept rather than introducing a different visual theme. That means keeping 245/35R20 at the front and 295/30R20 at the rear, both in radial construction on 20-inch rims, so the car continues to look properly proportioned.
Because this is a modern Aston Martin rather than an earlier collector-era car, appearance tends to come more from correct sizing and stance than from special sidewall treatments. A tire choice that matches the intended front or rear position and maintains the car’s designed setup will usually support the most appropriate presentation for a well-kept DBS.
Does correct tire fitment matter for a 2011 Aston Martin DBS restoration or preservation project?
Correct tire fitment matters on a 2011 Aston Martin DBS because the car’s look and stance depend on a proper staggered setup. Using the intended 245/35R20 front and 295/30R20 rear sizes helps preserve the proportions that belong with the DBS’s 20-inch wheel package and keeps the car visually balanced.
Preservation-minded owners should pay attention to more than tread depth alone. Tire age, sidewall condition, matching axle pairs, and wheel correctness all shape how the finished car presents. If exact historical accuracy is a goal beyond basic size and construction, marque-specific references and original vehicle documentation are the right place to confirm finer appearance details.
Fitment, Maintenance & Road Use
Can modifications affect tire fitment on a 2011 Aston Martin DBS?
Modifications can absolutely affect tire fitment on a 2011 Aston Martin DBS, even when the tire size itself appears correct. Changes such as aftermarket wheels, altered wheel widths, suspension lowering, alignment adjustments, or body modifications can influence how a 245/35R20 front or 295/30R20 rear tire sits and clears the surrounding components.
A DBS that has been changed from its original setup should be checked at the wheel, not just by reading the sidewall. Clearance at full steering lock, fender space, and the actual front-versus-rear wheel arrangement all matter. That is especially important on a staggered car, where a size intended for one end should not be assumed suitable for the other.
What should I inspect before driving a 2011 Aston Martin DBS on new tires?
Before driving a 2011 Aston Martin DBS on new tires, inspect that the correct sizes are mounted in the correct positions, with 245/35R20 at the front and 295/30R20 at the rear. Tire pressure, bead seating, visible sidewall condition, valve stems, and any sign of wheel damage should also be checked before normal road use begins.
A short initial drive followed by a second inspection is a smart step on a high-performance grand touring car. Looking again for air loss, vibration, rubbing, or irregular contact can catch setup issues early. It also helps to verify alignment condition and suspension health, since even properly sized new tires cannot compensate for worn chassis components.
What should I check before a longer drive in a 2011 Aston Martin DBS?
A longer drive in a 2011 Aston Martin DBS calls for a careful look at tire pressure, tread condition, sidewall health, and any signs of cuts, cracking, bulges, or slow air loss. The staggered setup should also be confirmed visually so the front 245/35R20 and rear 295/30R20 tires remain in their proper positions.
Longer trips put more heat and distance into the tire package, so age and condition matter as much as remaining tread. Cars that spend time in storage deserve extra attention before returning to road use. Checking the wheels, alignment feel, and suspension behavior beforehand can help the DBS stay composed and avoid preventable tire-related issues on the road.
