The 2010 Maybach 62 sits at the ultra-luxury end of the modern German sedan world, built for long-wheelbase comfort, quiet high-speed touring, and an unmistakably formal presence. In this model year, tire selection is tied closely to the exact version of the car because the 62 family spans both 19-inch and 20-inch wheel fitments. The primary sizes are 275/50R19 and 275/45R20, and both are radial metric fitments. That makes the real decision less about vintage construction and more about confirming the correct sub-model, wheel diameter, and overall tire profile. Owners focused on proper ride quality, appearance, and clearance should start there before comparing replacement choices.
Which Tire Size Is Right for The 2010 Maybach 62
The 2010 Maybach 62 uses two primary tire sizes, and the right one depends on the exact sub-model and wheel diameter. Both fitments are radial metric sizes, but they are built around different rim diameters, so identifying whether the car uses 19-inch or 20-inch wheels is the first step before comparing replacement tires.
Fit(s): (Winter Tires), Base, S (Winter Tires), S Landaulet (Winter Tires), and S Zeppelin (Winter Tires)
Construction: Radial|Rim: 19 in
The size 275/50R19 identifies a radial tire that is 275 millimeters wide, uses a 50-series profile, and mounts on a 19-inch rim. On the 2010 Maybach 62, this size is used for the Base model and the Winter Tires versions across the 62 range, making it especially important for owners running the 19-inch wheel setup. Its overall dimensions support the large sedan's ride and stance while staying within a modern metric format familiar to late-model luxury cars. This is the size to evaluate when the car is equipped with 19-inch wheels and winter-oriented fitment.
The size 275/45R20 uses the same 275-millimeter section width but pairs it with a lower 45-series profile on a 20-inch rim. On the 2010 Maybach 62, this fitment applies to the 62 S, 62 S Landaulet, and 62 S Zeppelin in their standard non-winter configurations. The lower profile and larger rim diameter make wheel confirmation critical, since a 20-inch tire should not be treated as interchangeable with the 19-inch setup. This is the proper size to review when the car carries the 20-inch wheel package tied to those higher-spec variants.
Tire fitment on the 2010 Maybach 62 changes by sub-model, and the split follows wheel diameter as much as trim level. Checking the exact version of the car matters because winter-tire configurations return to the 19-inch fitment even on 62 S, Landaulet, and Zeppelin models.
1
2010 Maybach 62 (Winter Tires)
The 2010 Maybach 62 (Winter Tires) uses the 275/50R19 radial fitment on a 19-inch wheel setup. Tire selection here should stay focused on that winter configuration rather than the larger 20-inch fitment used on some other versions.
The 2010 Maybach 62 Base uses the 275/50R19 radial tire size. That keeps the selection process straightforward, with the main job being confirmation of the 19-inch wheel before choosing a replacement tire.
The 2010 Maybach 62 S uses the 275/45R20 radial size in standard form. This makes 20-inch wheel confirmation essential before replacement, especially since winter versions of the same model shift to a different size.
The 2010 Maybach 62 S (Winter Tires) uses the 275/50R19 radial fitment rather than the standard 20-inch setup. Owners should match the tire to the actual winter wheel package on the car before selecting a replacement.
The 2010 Maybach 62 S Landaulet uses the 275/45R20 radial tire size in its standard configuration. For replacement planning, the important point is confirming the 20-inch wheel setup and not assuming it shares the same fitment as winter-package versions.
The 2010 Maybach 62 S Landaulet (Winter Tires) uses the 275/50R19 radial size. That means the actual wheel and tire package on the car should be checked first, since the Landaulet name alone does not guarantee the 20-inch fitment.
The 2010 Maybach 62 S Zeppelin uses the 275/45R20 radial fitment in standard form. Replacement tire selection should begin with the 20-inch wheel diameter and the correct low-profile metric size for that configuration.
The 2010 Maybach 62 S Zeppelin (Winter Tires) uses the 275/50R19 radial size. That makes it important to verify whether the car is on its winter wheel set before choosing between the two Maybach 62 tire fitments.
The tire sizes listed on this page assume factory-standard vehicle configuration. The following modifications may affect tire fitment and are not reflected in this guide:
Suspension changes (lowering, lift kits, spring replacements)
Body alterations (fender modifications, custom bodywork)
If your vehicle has been modified from factory specifications, verify tire clearance before purchase.
Frequently Asked Questions
These FAQs focus on the exact tire sizes used on the 2010 Maybach 62, how fitment changes across Base, S, Landaulet, Zeppelin, and winter-tire configurations, and what to inspect before replacing tires on a large luxury sedan with either 19-inch or 20-inch wheels.
Tire Size & Fitment
What tire size fits a 2010 Maybach 62?
The 2010 Maybach 62 uses two tire sizes: 275/50R19 and 275/45R20. The 275/50R19 size is used on the Base model and on Winter Tires configurations, while 275/45R20 is used on the standard 62 S, 62 S Landaulet, and 62 S Zeppelin.
The key step is identifying the exact sub-model and confirming whether the car is on its standard or winter wheel setup. Since these sizes mount on different rim diameters, the correct choice starts with the actual wheel on the car rather than the model name alone.
What size rim does a 2010 Maybach 62 use?
A 2010 Maybach 62 uses either a 19-inch or 20-inch rim, depending on the sub-model and tire setup. The 275/50R19 tire mounts on a 19-inch rim, while the 275/45R20 tire mounts on a 20-inch rim.
That difference matters because a 19-inch tire and a 20-inch tire are not interchangeable simply because they share the same section width. Checking the wheel diameter stamped on the rim or confirming the current tire size on the car is the safest way to avoid ordering the wrong fitment.
Why does the 2010 Maybach 62 have more than one tire size?
The 2010 Maybach 62 has more than one tire size because fitment changes by sub-model and wheel package. Base and winter-tire versions use 275/50R19, while standard 62 S, 62 S Landaulet, and 62 S Zeppelin models use 275/45R20.
In practical terms, the larger 20-inch fitment belongs to certain standard S-derived versions, while winter configurations return to the 19-inch size. That means replacement planning should start with the car's current wheel and tire setup, especially if seasonal wheels have been installed.
Choosing the Right Tire
What should I consider when choosing a tire for a 2010 Maybach 62?
Start with the exact tire size and wheel diameter used on the car, since the 2010 Maybach 62 uses either 275/50R19 or 275/45R20. The right selection depends on whether the car is a Base model, an S-based model, or a winter-tire configuration.
After size confirmation, compare the replacement tire's overall dimensions, intended use, and compatibility with the car's wheel setup. On a long-wheelbase luxury sedan like the Maybach 62, ride quality, clearance, and maintaining the proper profile for the wheel diameter should all be part of the decision.
How do I choose between the available 2010 Maybach 62 tire sizes?
The two sizes are not alternate choices for the same setup; they belong to different Maybach 62 configurations. A 275/50R19 tire is tied to 19-inch applications, while 275/45R20 is tied to 20-inch applications on certain standard S-based models.
That means the decision is really about identifying the car's actual wheel package rather than selecting whichever size seems close. Checking the existing sidewall marking, the rim diameter, and whether the vehicle is wearing a winter setup will point you to the correct tire size.
What rim-fitment details should I compare when choosing 2010 Maybach 62 tires?
The first rim-fitment detail to compare is diameter, because the 2010 Maybach 62 uses both 19-inch and 20-inch applications. The tire must match the wheel exactly, with 275/50R19 reserved for 19-inch rims and 275/45R20 reserved for 20-inch rims.
After that, inspect the wheel width and the tire's physical clearance within the wheel well, especially if the car has had wheel, suspension, or seasonal-package changes. A luxury sedan with large wheels and tight body tolerances benefits from careful confirmation before any replacement is installed.
Restoration & Appearance
Does correct tire fitment matter for a 2010 Maybach 62 restoration or preservation project?
Yes, correct tire fitment matters on a 2010 Maybach 62 because the car's stance, ride quality, and wheel presentation depend on using the proper metric radial size for the exact configuration. The difference between 275/50R19 and 275/45R20 is tied to specific versions of the car.
For a preservation-minded owner, keeping the right wheel diameter and tire profile helps maintain the car's intended visual balance. If originality is especially important, compare the current setup with the car's actual trim and wheel package rather than assuming every Maybach 62 in this model year used the same tires.
Which tire fitment should I keep for a period-appropriate 2010 Maybach 62 appearance?
A period-appropriate appearance starts with keeping the tire size that matches the car's actual 2010 Maybach 62 configuration. That means 275/50R19 for Base and winter-tire setups, and 275/45R20 for standard 62 S, 62 S Landaulet, and 62 S Zeppelin models.
The visual difference comes from the wheel diameter and sidewall profile, so changing sizes can alter the car's proportions even when the width stays the same. Owners focused on authenticity should verify the original wheel package for the specific car before making any cosmetic or fitment-related change.
Fitment, Maintenance & Road Use
Can modifications affect tire fitment on a 2010 Maybach 62?
Yes, modifications can affect tire fitment on a 2010 Maybach 62. Changes such as aftermarket wheels, altered offsets, suspension lowering, or nonstandard seasonal wheel packages can change which tire size is appropriate and how much clearance remains around the tire.
A Maybach 62 already uses large-diameter wheel and tire combinations, so even small changes can influence steering clearance, fender room, and ride behavior. Any car that has been modified should be checked at the wheel, not just by model name, before replacement tires are selected.
What should I inspect before driving a 2010 Maybach 62 on new tires?
Before driving a 2010 Maybach 62 on new tires, inspect the wheel diameter, confirm the installed tire size, and make sure each tire is seated and inflated properly. It is also wise to look over the wheels for damage and confirm that the tires clear the body and suspension components.
Once the car is on the ground, pay attention to rubbing during full steering lock and over suspension movement. A short road test should also include a check for vibration, air loss, or uneven behavior, especially if the car has changed from one wheel package to another.
How often should tires on a 2010 Maybach 62 be inspected?
Tires on a 2010 Maybach 62 should be inspected regularly, not just when tread looks low. A large luxury sedan that may spend periods in storage benefits from routine checks for pressure loss, sidewall cracking, bulges, cuts, and signs of uneven wear.
Inspection is especially important before longer drives or seasonal wheel changes, since this model can use both 19-inch and 20-inch setups. Looking at the tires while the car is stationary is useful, but a moving check for vibration, pull, or clearance issues adds another layer of confidence.
