The 2010 Land Rover Trucks LR2 sits in the compact luxury SUV segment with the upright stance, all-weather character, and road-ready versatility that helped define Land Rover’s modern daily-driver era. It appeals to owners who want genuine utility without stepping away from a refined, contemporary package. For this exact LR2, tire selection starts with two radial fitments: 235/60R18 and 235/55R19. That makes the main decision less about vintage construction and more about confirming which wheel diameter is on the vehicle, then choosing the right tire within that size. For restoration-minded upkeep or regular road use, matching the tire to the actual wheel setup is the key first step.
Which Tire Size Is Right for The 2010 Land Rover Trucks LR2
The 2010 Land Rover Trucks LR2 uses two primary tire sizes, and both are radial fitments. The important difference is wheel diameter: one size is for an 18-inch rim and the other is for a 19-inch rim. Before choosing a tire, confirm which wheels are currently on the vehicle, since that determines the correct size far more than trim name alone.
235/55R19 is a metric radial size in which 235 identifies the nominal section width in millimeters, 55 is the aspect ratio, R marks radial construction, and 19 is the rim diameter in inches. On the 2010 Land Rover Trucks LR2, this size belongs to vehicles running 19-inch wheels rather than the alternate 18-inch setup. Its modern metric format is familiar to current SUV owners and keeps selection centered on the correct wheel match. Choose this size only after confirming the vehicle is actually equipped with 19-inch rims and has the clearance and wheel specifications that suit this fitment.
235/60R18 is a metric radial size that uses a 235-millimeter nominal section width, a 60-series aspect ratio, radial construction, and an 18-inch rim diameter. For the 2010 Land Rover Trucks LR2, this size applies to vehicles fitted with 18-inch wheels instead of the 19-inch alternative. The overall dimensions are close in spirit to the other LR2 fitment, but the wheel requirement is different and remains the deciding factor. This is the size to evaluate when the vehicle retains or currently wears 18-inch wheels and the rest of the setup supports that specification.
Sub-model fitment is straightforward here, but wheel choice still matters. The 2010 Land Rover Trucks LR2 HSE can use either of the two radial tire sizes, so the first check is the rim diameter actually installed on the vehicle.
1
2010 Land Rover Trucks LR2 HSE
The 2010 Land Rover Trucks LR2 HSE uses radial tires and appears with both 235/60R18 and 235/55R19 fitments. That means tire selection starts by confirming whether the vehicle is on 18-inch or 19-inch wheels, then choosing within the correct size for appearance, road use, and overall setup.
The tire sizes listed on this page assume factory-standard vehicle configuration. The following modifications may affect tire fitment and are not reflected in this guide:
Suspension changes (lowering, lift kits, spring replacements)
Body alterations (fender modifications, custom bodywork)
If your vehicle has been modified from factory specifications, verify tire clearance before purchase.
Frequently Asked Questions
Tire questions for the 2010 Land Rover Trucks LR2 usually come down to size, wheel diameter, and selecting the correct radial fitment for the vehicle’s actual setup. The FAQs below focus on those practical checks, along with maintenance and road-use considerations.
Tire Size & Fitment
What tire size fits a 2010 Land Rover Trucks LR2?
The 2010 Land Rover Trucks LR2 uses two primary tire sizes: 235/60R18 and 235/55R19. Both are radial sizes, and both apply to this model depending on which wheels are on the vehicle. The LR2 HSE is associated with both of these fitments rather than a single exclusive size.
The practical choice starts with the wheel itself, not just the model name. An LR2 on 18-inch rims needs 235/60R18, while one on 19-inch rims needs 235/55R19. Checking the tire sidewall, measuring the wheel, or confirming the current wheel package helps prevent ordering the right size for the wrong rim.
What size rim does a 2010 Land Rover Trucks LR2 use?
A 2010 Land Rover Trucks LR2 uses either an 18-inch or 19-inch rim, depending on which of its two primary tire sizes is on the vehicle. The 235/60R18 tire mounts on an 18-inch rim, while the 235/55R19 tire mounts on a 19-inch rim. Both fitments are radial.
Wheel diameter is the first fitment point to verify because the two LR2 tire sizes are tied directly to different rims. A tire sized for an 18-inch wheel cannot be used on a 19-inch wheel, even if the vehicle is the same year and model. Checking the actual wheel setup matters even more if the vehicle has changed wheels over time.
Why does the 2010 Land Rover Trucks LR2 have more than one tire size?
The 2010 Land Rover Trucks LR2 has more than one tire size because it was fitted with two different wheel diameters: 18-inch and 19-inch. That creates two correct radial tire fitments, 235/60R18 and 235/55R19. The difference is driven by wheel choice rather than a change from bias-ply to radial construction.
That means tire selection is not a matter of preference alone. The correct size depends on the wheel package currently on the vehicle, and that should be confirmed before comparing tread designs or brands. On an LR2 that has seen replacement wheels, the safest path is to verify the installed rim diameter and overall wheel specifications first.
Choosing the Right Tire
What should I consider when choosing a tire for a 2010 Land Rover Trucks LR2?
Start with the correct size for the wheels on the vehicle. A 2010 Land Rover Trucks LR2 uses either 235/60R18 or 235/55R19, and both are radial fitments. The first decision is confirming rim diameter, since choosing the wrong tire size for the wheel stops the process immediately.
After that, compare the tire within the proper size based on how the LR2 is used. A daily-driven SUV, a lightly used extra vehicle, and an example with aftermarket wheel changes can each call for a different level of fitment checking. Tire age, load needs, wheel condition, and suspension clearance all deserve attention before final selection.
How do I choose between 235/55R19 and 235/60R18 tires for a 2010 Land Rover Trucks LR2?
The choice between 235/55R19 and 235/60R18 is determined by wheel diameter, not by preference alone. A 2010 Land Rover Trucks LR2 with 19-inch rims uses 235/55R19, while one with 18-inch rims uses 235/60R18. Both sizes are proper radial fitments for this model when matched to the correct wheel.
That makes wheel confirmation the deciding step before comparing any tire options. Looking at the current tire sidewall is a quick starting point, but it is still wise to confirm the actual wheel size if the LR2 has had prior owner changes. Matching the tire to the installed rim helps avoid mounting problems and clearance surprises.
Why is wheel confirmation so important when buying tires for a 2010 Land Rover Trucks LR2?
Wheel confirmation matters because the 2010 Land Rover Trucks LR2 uses two different radial tire sizes tied to two different rim diameters. The 235/60R18 size is built for an 18-inch rim, and the 235/55R19 size is built for a 19-inch rim. Even though both fit the same model line, they are not interchangeable at the wheel.
That is especially important on used vehicles, where wheel changes are common. A trim badge alone does not guarantee the current setup still matches its original wheel package. Taking a moment to verify the installed rim diameter and current tire markings can prevent a costly mistake and narrow the search to the correct group of tires.
Restoration & Appearance
Does correct tire fitment matter for a 2010 Land Rover Trucks LR2 restoration or preservation project?
Yes, correct tire fitment matters because the 2010 Land Rover Trucks LR2 was built around specific modern radial sizes tied to either 18-inch or 19-inch wheels. Using 235/60R18 or 235/55R19 as appropriate helps maintain the vehicle’s intended stance and wheel-to-tire relationship without forcing an incorrect rim match.
For a preservation-minded LR2, the goal is usually to keep the appearance and proportions consistent with the wheel package actually on the vehicle. That makes it worth confirming whether the wheels are original-style or later replacements before choosing tires. Visual accuracy starts with the correct size, even before tread pattern or brand enters the picture.
Which tire size should I use for a period-appropriate 2010 Land Rover Trucks LR2 appearance?
A period-appropriate appearance starts with the same size family the 2010 Land Rover Trucks LR2 used in service: 235/60R18 on 18-inch wheels or 235/55R19 on 19-inch wheels. Both are modern metric radial sizes, so the right visual starting point depends on which wheel diameter the vehicle currently wears.
Appearance can shift noticeably when an LR2 is moved away from its proper wheel-and-tire relationship. Keeping the correct size for the installed rim helps preserve the SUV’s intended proportions and avoids an obviously mismatched look. If exact originality is important, compare the current wheel package to period vehicle documentation before making a final choice.
Fitment, Maintenance & Road Use
Can modifications affect tire fitment on a 2010 Land Rover Trucks LR2?
Yes, modifications can affect tire fitment on a 2010 Land Rover Trucks LR2 even when the tire size appears correct on paper. Wheel changes, altered offsets, suspension work, lowering, or nonstandard ride height can all influence how 235/60R18 or 235/55R19 sits in the wheel opening and clears surrounding components.
That is why the current setup should be checked rather than assuming every LR2 matches stock dimensions. Steering clearance, inner-sidewall room, and fender clearance all matter once a vehicle has been changed. A tire that matches the rim diameter still needs to work with the actual wheel width and the vehicle’s present suspension and body condition.
What should I inspect before driving a 2010 Land Rover Trucks LR2 on new tires?
Before driving a 2010 Land Rover Trucks LR2 on new tires, inspect the wheels for damage, confirm the tire size matches the installed rim diameter, and look over the suspension and steering for obvious wear. It also helps to verify inflation pressure, lug hardware condition, and general clearance around the tire once mounted.
A short check drive should include listening for rubbing, feeling for vibration, and making sure the vehicle tracks normally. Any LR2 that has sat for long periods deserves extra attention to alignment condition, aged rubber components, and air retention after installation. Catching those issues early helps the new tires work as intended from the start.
How often should tires on a 2010 Land Rover Trucks LR2 be inspected?
Tires on a 2010 Land Rover Trucks LR2 should be inspected regularly, not only when tread looks low. Routine checks for pressure loss, uneven wear, cuts, cracking, bulges, and embedded debris are worthwhile whether the vehicle is driven daily or only occasionally. Both of the LR2’s fitments deserve the same basic inspection discipline.
Low-use vehicles can age tires out before they wear them out, so storage history matters as much as mileage. Looking over the tires before longer trips is especially smart on an SUV that may see changing road and weather conditions. Consistent inspections also make it easier to spot alignment or suspension problems before they damage a newer set.
