The 2010 Jeep Trucks Compass arrived during an era when compact crossovers were expected to balance everyday comfort, light utility, and car-like road manners in one package. For many owners, that makes tire fitment less about nostalgia and more about matching the vehicle’s exact trim and wheel setup. This model uses three primary radial tire sizes: 215/55R18, 215/60R17, and 215/65R17, with fitment changing by sub-model and wheel diameter. That means the real choice starts with confirming whether the Compass has 17-inch or 18-inch wheels, then selecting a tire that suits the vehicle’s intended street use, appearance, and overall setup.
Which Tire Size Is Right for The 2010 Jeep Trucks Compass
The 2010 Jeep Trucks Compass uses three primary tire sizes, and the right one depends on the exact sub-model and wheel diameter. All three are metric radial sizes, but they are split between 17-inch and 18-inch rims, so the first step is confirming the specific Compass trim and the wheels currently on the vehicle before choosing a replacement tire.
215/55R18 is a metric radial size in which 215 identifies the nominal section width in millimeters, 55 is the aspect ratio, R denotes radial construction, and 18 is the rim diameter in inches. On the 2010 Jeep Trucks Compass, this size is tied to an 18-inch wheel setup and suits vehicles equipped for that larger rim diameter. Its overall proportions differ from the 17-inch Compass fitments, so it should be selected only after confirming the actual wheel size on the vehicle. This is the size to evaluate when replacing tires on a Compass Limited or any Compass already running 18-inch wheels.
215/60R17 is a metric radial size with a 215-millimeter nominal section width, a 60-series aspect ratio, and a 17-inch rim diameter. For the 2010 Jeep Trucks Compass, it is one of the 17-inch fitments used on Sport models, making it part of the trim-level fitment decision rather than a universal Compass size. Because it shares wheel diameter with 215/65R17 but uses a different profile, it is important to match the vehicle’s existing setup rather than choosing by rim size alone. This size is best considered when the Compass already carries the corresponding 17-inch tire specification.
215/65R17 is another metric radial size, using the same 215-millimeter nominal section width as the other Compass fitments but with a taller 65-series profile on a 17-inch rim. On the 2010 Jeep Trucks Compass, this size also appears on Sport models, so buyers need to verify the exact tire placard, existing tire size, and wheel setup before replacement. Even though it shares the same rim diameter as 215/60R17, it is not the same fitment choice. This size becomes the right one only when the vehicle is already set up for the taller 17-inch tire specification.
Sub-model fitment matters on the 2010 Jeep Trucks Compass because tire size is not the same across the full range. The key distinction is whether the vehicle is a Limited with 18-inch fitment or a Sport with one of the two 17-inch radial sizes.
1
2010 Jeep Trucks Compass Limited
The 2010 Jeep Trucks Compass Limited uses a single 18-inch radial tire size, which makes size selection more straightforward once the trim is confirmed. The main task is matching the existing wheel diameter and choosing a replacement tire that suits the vehicle’s normal road use and present wheel setup.
The 2010 Jeep Trucks Compass Sport uses two different 17-inch radial tire sizes, so trim alone does not fully settle the fitment question. Tire selection starts with verifying which of the two 17-inch specifications is already on the vehicle before comparing replacement options.
The tire sizes listed on this page assume factory-standard vehicle configuration. The following modifications may affect tire fitment and are not reflected in this guide:
Suspension changes (lowering, lift kits, spring replacements)
Body alterations (fender modifications, custom bodywork)
If your vehicle has been modified from factory specifications, verify tire clearance before purchase.
Frequently Asked Questions
The most useful questions for the 2010 Jeep Trucks Compass center on identifying the correct tire size by sub-model, confirming 17-inch versus 18-inch wheel fitment, and checking how wheel changes, maintenance, and everyday road use affect replacement-tire decisions.
Tire Size & Fitment
What tire size fits a 2010 Jeep Trucks Compass?
The 2010 Jeep Trucks Compass uses three primary tire sizes: 215/55R18, 215/60R17, and 215/65R17. The Limited uses 215/55R18, while the Sport uses either 215/60R17 or 215/65R17, so there is not one universal size for every Compass in this model year.
Choosing the right replacement starts with identifying the exact sub-model and then confirming the tire size already on the vehicle or shown on the placard. That matters because the Compass uses both 17-inch and 18-inch wheel fitments, and even the two 17-inch sizes are not the same profile.
What size rim does a 2010 Jeep Trucks Compass use?
A 2010 Jeep Trucks Compass uses either a 17-inch or 18-inch rim, depending on the tire size and sub-model. The 215/55R18 fitment uses an 18-inch rim, while both 215/60R17 and 215/65R17 use a 17-inch rim.
Rim diameter is the first fitment point to verify before buying tires because a 17-inch tire cannot be mounted on an 18-inch wheel, and an 18-inch tire cannot be mounted on a 17-inch wheel. Once wheel diameter is confirmed, the next step is matching the exact tire size rather than choosing only by rim size.
Do all 2010 Jeep Trucks Compass sub-models use the same tire size?
No. The 2010 Jeep Trucks Compass Limited uses 215/55R18, while the Sport uses either 215/60R17 or 215/65R17. That split means tire fitment varies by sub-model and, in the case of the Sport, can still vary within that trim.
That variation makes it important to identify more than just the model name before ordering replacements. A buyer should confirm the exact sub-model, check the wheels currently on the vehicle, and compare the existing tire size so the new set matches the Compass’s actual configuration.
Choosing the Right Tire
What should I consider when choosing a tire for a 2010 Jeep Trucks Compass?
Start with the correct size for the exact Compass configuration: 215/55R18, 215/60R17, or 215/65R17. The main fitment factors are sub-model, rim diameter, and tire profile, since this model year uses both 17-inch and 18-inch wheels and more than one 17-inch size.
After size is confirmed, compare the tire to the way the vehicle is actually used. A Compass driven mainly on regular roads should still have its wheel size, overall clearance, and current setup checked carefully, especially if the vehicle has changed hands or has had wheels replaced at some point.
How do I choose between the available 17-inch tires for a 2010 Jeep Trucks Compass?
The two 17-inch Compass sizes are 215/60R17 and 215/65R17, and they are not interchangeable just because they fit the same rim diameter. Both are radial sizes, but they use different aspect ratios, which means they represent different overall tire proportions on the vehicle.
The best way to choose between them is to match the specification already assigned to the Compass rather than selecting one by appearance alone. Checking the current tire size, wheel setup, and vehicle placard helps avoid replacing a correct 17-inch fitment with another 17-inch size that changes the setup.
How do I choose between the available tire sizes for a 2010 Jeep Trucks Compass Limited or Sport?
The Limited and Sport do not follow the same fitment path. Limited models use 215/55R18, while Sport models use either 215/60R17 or 215/65R17, so size selection depends first on trim and then on the actual wheels and tires already installed.
That means the buying decision is less about preference between sizes and more about verifying which fitment belongs on the vehicle in front of you. Once the correct size is confirmed, replacement becomes a matter of choosing a tire that matches the Compass’s wheel diameter and intended day-to-day use.
Restoration & Appearance
Does correct tire fitment matter for a 2010 Jeep Trucks Compass restoration or clean stock-style rebuild?
Yes. Even on a newer vehicle like the 2010 Jeep Trucks Compass, correct tire fitment matters if the goal is to preserve a stock-style presentation and keep the vehicle close to its intended stance. Using the proper size also helps maintain the visual balance created by the original 17-inch or 18-inch wheel setup.
A clean rebuild benefits from confirming the actual sub-model and tire specification before replacing wheels or tires. Staying with the proper 215/55R18, 215/60R17, or 215/65R17 fitment avoids a mismatched look and reduces the chance of introducing clearance or proportion issues that distract from an otherwise tidy result.
Which tire should I choose for a period-style 2010 Jeep Trucks Compass?
A period-style choice for a 2010 Jeep Trucks Compass begins with the exact original-size format used by the vehicle: a modern metric radial in 215/55R18, 215/60R17, or 215/65R17. Since this Compass is a crossover from the modern radial era, the most appropriate visual starting point is the correct metric size on the proper wheel diameter.
Keeping the correct size matters more here than chasing a vintage-style construction or alternate format. Owners aiming for a stock-style appearance should confirm the trim, rim diameter, and existing setup first, then choose a replacement tire that preserves the vehicle’s intended proportions rather than simply filling the wheel opening.
Fitment, Maintenance & Road Use
Can modifications affect tire fitment on a 2010 Jeep Trucks Compass?
Yes. Modifications such as aftermarket wheels, suspension changes, altered ride height, or non-original wheel offsets can affect tire fitment on a 2010 Jeep Trucks Compass even when the tire size appears close to stock. That matters here because the Compass already uses more than one factory size and more than one rim diameter.
A modified vehicle should be checked for actual wheel diameter, wheel width, and clearance at steering and suspension travel before replacement tires are chosen. Matching the size printed on the current tire is not always enough if the wheels or suspension have been changed from the original Compass setup.
What should I inspect before driving a 2010 Jeep Trucks Compass on new tires?
Before road use, inspect the wheel size, tire pressure, and the basic condition of the surrounding components. It also helps to confirm that the new tires match the correct Compass fitment and that there is no rubbing at the fenders, struts, or steering components when the wheels are turned.
A short check drive should be done with attention to vibration, pulling, unusual noise, or contact under load. The Compass may use either 17-inch or 18-inch tires depending on configuration, so confirming proper mounting and clearance on the actual vehicle is just as important as choosing the right printed size.
How often should tires on a 2010 Jeep Trucks Compass be inspected?
Tires on a 2010 Jeep Trucks Compass should be inspected regularly for pressure loss, uneven wear, cuts, bulges, and visible cracking. Frequent checks are especially important on vehicles that see mixed use, sit for long periods, or have recently had wheel, suspension, or alignment work performed.
Routine inspections help catch problems before they become fitment or road-use issues. On a Compass with multiple possible factory sizes, those checks are also a good time to confirm that all four tires match the intended specification and that wheel diameter, tire profile, and overall clearance remain consistent across the vehicle.
