The 2010 GMC Trucks Yukon sits squarely in the full-size SUV market, balancing family hauling, towing duty, and the road presence that made this generation popular in both stock and customized form. Tire selection matters because this Yukon uses four different primary radial sizes depending on sub-model and wheel package: 265/70R17, 265/65R18, 275/55R20, and 285/45R22. That means the first step is confirming the exact trim and wheel diameter rather than choosing by model name alone. Available product choice shown here centers on 265/70R17 in BFGoodrich All-Terrain T/A KO2 form with raised white letter styling. Before replacing tires, check the actual wheel setup, especially on Yukons that may have been upgraded or modified over time.
Which Tire Size Is Right for The 2010 GMC Trucks Yukon
The 2010 GMC Trucks Yukon uses four primary tire sizes, and they are tied to specific sub-models and wheel diameters. Every fitment here is radial, but the correct choice still depends on identifying the exact Yukon trim and confirming whether it has 17-, 18-, 20-, or 22-inch wheels. On SLE and SLT models especially, wheel diameter is the key detail before choosing a tire.
275/55R20 is a metric radial size in which 275 identifies section width in millimeters, 55 is the aspect ratio, R marks radial construction, and 20 is the rim diameter in inches. On the 2010 GMC Trucks Yukon, this size belongs to 20-inch wheel applications and is one of the main fitments used on select sub-models. Its role is less about decoding an older sizing system and more about confirming that the wheel package matches the tire. This is an important size to verify carefully on Yukons that may have changed wheels since new.
285/45R22 is a metric radial size with a 285-millimeter nominal width, a 45-series profile, and a 22-inch rim diameter. For the 2010 GMC Trucks Yukon, it is tied to a specific 22-inch wheel application rather than being a broad fitment across the entire model line. The lower profile and larger rim diameter make wheel confirmation especially important before replacement. Buyers considering this size should check the exact sub-model and make sure the vehicle still carries the proper 22-inch wheel setup.
265/65R18 is a metric radial size where 265 is the nominal width in millimeters, 65 is the aspect ratio, and 18 is the wheel diameter in inches. On the 2010 GMC Trucks Yukon, this size applies to certain sub-models using 18-inch wheels, so it is a trim-specific fitment rather than a universal Yukon size. The format is straightforward for modern buyers, but the important part is matching the tire to the actual wheel diameter on the vehicle. That is especially useful when comparing Hybrid and XFE configurations.
265/70R17 is a metric radial tire size with a 265-millimeter nominal width, a 70-series aspect ratio, and a 17-inch rim diameter. For the 2010 GMC Trucks Yukon, this size is used on certain SLE and SLT applications with 17-inch wheels. Available choices in this size include BFGoodrich All-Terrain T/A KO2 products with raised white letter sidewalls, along with differences in load capacity and tire weight. This size is worth evaluating closely if the Yukon is used for utility, light off-pavement travel, or a more truck-oriented appearance.
Sub-model fitment matters on the 2010 GMC Trucks Yukon because tire size changes with trim and wheel package. Some versions use one dedicated size, while SLE and SLT can be found with either 17-inch or 20-inch wheel fitments, so confirming the exact setup is essential.
1
2010 GMC Trucks Yukon Denali
The 2010 GMC Trucks Yukon Denali uses the 275/55R20 radial size on a 20-inch wheel package. Tire selection starts with confirming that the vehicle still has the correct 20-inch wheels, then choosing a replacement that matches the Denali’s intended road use and overall presentation.
The 2010 GMC Trucks Yukon Denali Hybrid uses 285/45R22 radial tires, making it the 22-inch fitment within the Yukon range covered here. That makes wheel-diameter confirmation especially important before replacement, particularly if the vehicle has changed hands or received wheel swaps over time.
The 2010 GMC Trucks Yukon Hybrid uses the 265/65R18 radial size. For tire selection, the main priority is keeping the correct 18-inch fitment and confirming that the wheel and tire combination still matches the vehicle’s current setup.
The 2010 GMC Trucks Yukon SLE can use either 265/70R17 or 275/55R20 radial tires depending on wheel package. That means an SLE owner should verify actual wheel diameter before choosing a tire, since model name alone is not enough to select the correct size.
The 2010 GMC Trucks Yukon SLE XFE uses the 265/65R18 radial size. Tire choice here is more straightforward than on multi-size trims, but it still helps to confirm the wheel diameter and compare replacements with the vehicle’s present ride and use requirements.
The 2010 GMC Trucks Yukon SLT can use either 265/70R17 or 275/55R20 radial tires, depending on how the vehicle is equipped. The practical step is checking whether the Yukon has 17-inch or 20-inch wheels before comparing tire options or replacing a worn set.
The tire sizes listed on this page assume factory-standard vehicle configuration. The following modifications may affect tire fitment and are not reflected in this guide:
Suspension changes (lowering, lift kits, spring replacements)
Body alterations (fender modifications, custom bodywork)
If your vehicle has been modified from factory specifications, verify tire clearance before purchase.
Best 2010 GMC Trucks Yukon Tires for Sale
Available product choice for the 2010 GMC Trucks Yukon currently centers on 265/70R17, where BFGoodrich All-Terrain T/A KO2 options are offered with raised white letter sidewalls, radial construction, 17-inch rim fitment, and differing load and weight specifications.
These FAQs focus on the tire sizes used on the 2010 GMC Trucks Yukon, how trim level and wheel diameter affect fitment, and what to compare when choosing, maintaining, or replacing the correct radial tire.
Tire Size & Fitment
What tire size fits a 2010 GMC Trucks Yukon?
The 2010 GMC Trucks Yukon uses four primary radial tire sizes: 265/70R17, 265/65R18, 275/55R20, and 285/45R22. The correct size depends on the specific sub-model and wheel package, rather than the Yukon name alone, so different trims can use different diameters and profiles.
The practical next step is to confirm the exact trim and then verify the actual wheel diameter on the vehicle. SLE and SLT models can use more than one size, which means a current tire sidewall check or wheel measurement is often more reliable than assuming every 2010 Yukon uses the same fitment.
What size rim does a 2010 GMC Trucks Yukon use?
A 2010 GMC Trucks Yukon can use 17-, 18-, 20-, or 22-inch rims, depending on the sub-model and wheel package. Those rim diameters correspond to the primary tire sizes 265/70R17, 265/65R18, 275/55R20, and 285/45R22.
Rim diameter is the first thing to confirm before ordering replacement tires because the Yukon does not use one universal wheel size across the model range. Looking at the size molded into the current tire sidewall is usually the quickest way to verify whether the vehicle has the correct wheel diameter for its intended fitment.
Why does the 2010 GMC Trucks Yukon have more than one tire size?
The 2010 GMC Trucks Yukon has more than one tire size because different sub-models and wheel packages were equipped with different rim diameters. Denali, Denali Hybrid, Hybrid, SLE, SLE XFE, and SLT applications do not all share the same tire and wheel combination.
That means tire selection is really a trim-and-wheel question, not just a model-year question. On SLE and SLT trims in particular, two sizes are possible, so checking the actual wheel on the vehicle helps avoid ordering a tire that matches the model family but not the specific Yukon in front of you.
Choosing the Right Tire
What should I consider when choosing a tire for a 2010 GMC Trucks Yukon?
Start with the correct size for the exact sub-model and wheel diameter, since the 2010 GMC Trucks Yukon uses four different primary radial fitments. After that, compare construction, load specification, sidewall style, tire weight, and the type of driving the Yukon actually sees, whether that is highway use, utility duty, or mixed road conditions.
Selection becomes more specific in sizes where multiple product versions exist. For example, 265/70R17 options shown here include different load capacities and weights within the same BFGoodrich All-Terrain T/A KO2 family, so it helps to match the tire’s specifications to how the vehicle is driven and equipped.
What sidewall styles are available for 2010 GMC Trucks Yukon tires?
The sidewall style shown among the currently available 2010 GMC Trucks Yukon products is RWL, or raised white letter, in 265/70R17. That styling is part of the BFGoodrich All-Terrain T/A KO2 options available for certain Yukon applications using 17-inch wheels.
Sidewall treatment affects appearance more than fitment, so the first priority is still selecting the correct tire size and wheel diameter. Once that is confirmed, raised white letter styling can be a useful choice for owners who want a more truck-oriented look rather than a plain black sidewall presentation.
What brands offer tires for the 2010 GMC Trucks Yukon?
The currently shown product options for the 2010 GMC Trucks Yukon are from BFGoodrich, specifically in the 265/70R17 size. Those products are part of the All-Terrain T/A KO2 line and are built as radial tires for 17-inch wheel applications.
Brand is only one part of the decision, especially on a Yukon that may have different wheel packages depending on trim. It still makes sense to verify size, rim diameter, sidewall style, and load specification first, then compare products within the correct fitment rather than choosing by brand name alone.
Restoration & Appearance
Which tire should I choose for a period-style 2010 GMC Trucks Yukon?
For a period-style 2010 GMC Trucks Yukon, the best starting point is the correct original-size-type fitment for the exact sub-model and wheel diameter. Since this Yukon uses modern radial sizes, maintaining the proper 17-, 18-, 20-, or 22-inch tire size does more for the vehicle’s overall appearance than chasing an unrelated style cue.
Appearance should still be matched to how the vehicle is being presented. A Yukon kept close to stock usually looks most natural with the proper tire profile for its wheel package, while an SLE or SLT with 265/70R17 can lean into a more truck-oriented look if raised white letter all-terrain styling suits the build.
Does correct tire fitment matter for a 2010 GMC Trucks Yukon restoration?
Correct tire fitment matters on a 2010 GMC Trucks Yukon restoration because wheel diameter and tire profile have a major effect on stance, proportion, and overall presentation. Using the right size family for the specific trim helps the Yukon look consistent with the way that configuration was equipped.
Exact originality questions can go beyond size alone, especially if wheels have been changed over the years. Anyone restoring a Yukon closely should confirm the actual sub-model, inspect the wheel package currently on the vehicle, and use marque-specific references if the goal is to match a particular trim appearance as closely as possible.
Fitment, Maintenance & Road Use
Can modifications affect tire fitment on a 2010 GMC Trucks Yukon?
Yes, modifications can affect tire fitment on a 2010 GMC Trucks Yukon even when the tire size sounds correct for the model. Aftermarket wheels, altered offset, suspension changes, leveling kits, lowering, or body modifications can all change the amount of clearance available around the tire.
That is why the current setup should be checked before replacing tires, especially on SLE and SLT models that already have more than one factory size possibility. Looking at wheel diameter, wheel width, and clearance at full steering lock helps prevent choosing a tire that matches the trim on paper but not the vehicle’s present configuration.
What should I inspect before driving a 2010 GMC Trucks Yukon on new tires?
Before driving a 2010 GMC Trucks Yukon on new tires, inspect wheel condition, verify the correct tire pressure, and confirm that the tires clear the suspension, inner fenders, and steering components. It also helps to check lug torque, valve stems, and the overall condition of the wheels receiving the new tires.
A short initial road test is useful for spotting rubbing, vibration, or pulling before putting the Yukon into regular service. After that, keep an eye on inflation, uneven wear, and any sign of air loss, especially if the vehicle has larger wheels, a mixed-use driving cycle, or a suspension setup that has changed from stock.
How often should tires on a 2010 GMC Trucks Yukon be inspected?
Tires on a 2010 GMC Trucks Yukon should be inspected regularly, with a close visual check before longer trips and routine checks for pressure, tread wear, cracking, cuts, or bulges during normal ownership. Vehicles that sit for long periods still need inspection because age and storage conditions can affect tire condition even with low mileage.
Consistent inspection matters even more on a full-size SUV because load, towing use, and road conditions can accelerate wear or reveal inflation problems quickly. Looking over the tires and wheels at the same time makes it easier to catch irregular wear patterns early and address alignment, suspension, or pressure issues before they become bigger problems.
