The 2010 Ford Trucks F-250 Super Duty Lariat sits in the heavy-duty pickup world where towing, hauling, and four-season road use matter just as much as trim level and comfort. In Lariat form, it blends work-truck capability with a more upscale interior, so tire choice has to support both utility and everyday drivability. This exact model uses radial tire fitments, with 265/70R17, 275/65R18, 275/70R18, and 275/65R20 all appearing depending on configuration. Available choices center on BFGoodrich All-Terrain T/A KO2 tires with raised white letter or raised black letter sidewall treatments. The key step is confirming the truck's exact sub-model and wheel diameter before choosing load capacity, sidewall appearance, and intended use.
Which Tire Size Is Right for The 2010 Ford Trucks F-250 Super Duty Lariat
The 2010 Ford Trucks F-250 Super Duty Lariat uses four different primary tire sizes, and the correct one depends on the truck's exact sub-model and wheel setup. These fitments are all radial, but they span 17-inch, 18-inch, and 20-inch rims. Before comparing tires, confirm whether the truck is a 4x2 or 4x4 configuration and verify the wheel diameter currently on the vehicle.
275/65R18 is a metric radial size in which 275 is the section width in millimeters, 65 is the aspect ratio, R identifies radial construction, and 18 is the rim diameter in inches. On this F-250 Super Duty Lariat, it is one of the 18-inch fitments and suits trucks already equipped with the matching wheel diameter. Available products in this size use the BFGoodrich All-Terrain T/A KO2 series with a raised white letter sidewall treatment. It is a useful size to evaluate when keeping an 18-inch wheel package and matching the truck's existing stance and wheel compatibility.
265/70R17 is a metric radial size that denotes a 265-millimeter section width, a 70-series profile, radial construction, and a 17-inch rim. For the 2010 F-250 Super Duty Lariat, this size appears on certain 4x2 and 4x4 configurations and is tied to a 17-inch wheel setup. BFGoodrich All-Terrain T/A KO2 options are available in this size with raised white letter sidewalls, including versions with different load capacities. It is the size to focus on when the truck retains its 17-inch wheels and the goal is choosing the right specification within that fitment.
275/65R20 is a metric radial size with a 275-millimeter section width, 65-series profile, radial construction, and a 20-inch rim diameter. On this model, it is one of the fitments associated with certain 4x4 configurations, so it should not be treated as universal across all Lariat trucks. The available BFGoodrich All-Terrain T/A KO2 offering in this size uses a raised black letter sidewall, giving it a different visual character from the raised white letter options found in other sizes. It makes the most sense when the truck already carries 20-inch wheels and that specific wheel package is being retained.
275/70R18 is a metric radial size where 275 represents section width in millimeters, 70 is the aspect ratio, R marks radial construction, and 18 identifies the wheel diameter in inches. For this F-250 Super Duty Lariat, it is an 18-inch fitment used on certain 4x4 configurations, making configuration confirmation important before selection. BFGoodrich All-Terrain T/A KO2 tires are available in this size with a raised white letter sidewall. This size deserves a close look when the truck is equipped with the appropriate 18-inch wheels and the owner wants to stay within the correct 4x4 fitment range.
2010 Ford Trucks F-250 Super Duty Lariat Sub-Model Tires
Tire fitment on the 2010 Ford Trucks F-250 Super Duty Lariat varies by sub-model, so the correct choice is not the same across the entire lineup. Checking whether the truck is a 4x2 or 4x4 configuration, and confirming its wheel diameter, is the first step before comparing tire options.
1
2010 Ford Trucks F-250 Super Duty Lariat 4x2 (18 Inch Option)
The 4x2 with the 18 Inch Option uses an 18-inch radial fitment rather than the 17-inch setup found on other 4x2 versions. Tire selection here should stay focused on the correct 18-inch size and on matching the truck's existing wheel package and intended use.
2010 Ford Trucks F-250 Super Duty Lariat 4x2 Crew Cab
The 4x2 Crew Cab uses a 17-inch radial tire fitment, making it one of the Lariat configurations tied to the 265/70R17 size. The buying decision is less about choosing among multiple primary sizes and more about confirming load specification and staying with the proper wheel diameter.
2010 Ford Trucks F-250 Super Duty Lariat 4x2 Super Cab
The 4x2 Super Cab also uses the 17-inch radial fitment shared with the 4x2 Crew Cab. That keeps selection straightforward, with the main considerations being the correct size, the truck's wheel setup, and whether the chosen tire specification matches how the truck is used.
The 4x4 configuration carries the widest fitment range, using 17-inch, 18-inch, or 20-inch radial tire sizes depending on the specific setup. That makes wheel-diameter confirmation essential before comparing tires, since choosing the right size starts with the actual wheels on the truck.
The tire sizes listed on this page assume factory-standard vehicle configuration. The following modifications may affect tire fitment and are not reflected in this guide:
Suspension changes (lowering, lift kits, spring replacements)
Body alterations (fender modifications, custom bodywork)
If your vehicle has been modified from factory specifications, verify tire clearance before purchase.
Best 2010 Ford Trucks F-250 Super Duty Lariat Tires for Sale
Available tires for the 2010 Ford Trucks F-250 Super Duty Lariat center on BFGoodrich All-Terrain T/A KO2 radials across the correct 17-inch, 18-inch, and 20-inch sizes. The main product differences are sidewall treatment, load specification, weight, and rim-width compatibility within each fitment.
These FAQs focus on the exact tire sizes used on the 2010 Ford Trucks F-250 Super Duty Lariat, how fitment changes by sub-model and wheel diameter, and what to compare before choosing tires for work, road use, or a stock-style setup.
Tire Size & Fitment
What tire size fits a 2010 Ford Trucks F-250 Super Duty Lariat?
The 2010 Ford Trucks F-250 Super Duty Lariat uses four primary tire sizes: 265/70R17, 275/65R18, 275/70R18, and 275/65R20. All of these are radial fitments, but the correct size depends on the truck's exact sub-model and wheel package rather than the Lariat name alone.
The practical next step is to verify whether the truck is a 4x2 or 4x4 and confirm the wheel diameter currently installed. A 17-inch, 18-inch, or 20-inch wheel requires its matching tire size, and that matters even more if the truck has had wheel or suspension changes over time.
What size rim does a 2010 Ford Trucks F-250 Super Duty Lariat use?
A 2010 Ford Trucks F-250 Super Duty Lariat can use 17-inch, 18-inch, or 20-inch rims, depending on the specific configuration. The matching tire sizes are 265/70R17 for 17-inch rims, 275/65R18 or 275/70R18 for 18-inch rims, and 275/65R20 for 20-inch rims.
Wheel diameter should be confirmed before anything else, because tire size selection begins there. It also helps to check actual wheel width, especially on a truck that may have aftermarket wheels, since the available tires carry rim-width recommendations that should match the wheels already on the vehicle.
Do all 2010 Ford Trucks F-250 Super Duty Lariat sub-models use the same tire size?
No. The 2010 Ford Trucks F-250 Super Duty Lariat does not use one tire size across every sub-model. Some 4x2 versions use 265/70R17, the 4x2 with the 18 Inch Option uses 275/65R18, and the 4x4 configuration can use 265/70R17, 275/70R18, or 275/65R20.
That means the sub-model and wheel setup have to be identified before comparing products. A buyer looking at an F-250 Super Duty Lariat should verify the truck's drivetrain configuration and read the tire size from the sidewall or confirm the wheel diameter on the truck before choosing a replacement.
Choosing the Right Tire
What should I consider when choosing a tire for a 2010 Ford Trucks F-250 Super Duty Lariat?
Start with the correct primary tire size for the truck's exact sub-model and wheel diameter. On this Lariat, that may be 265/70R17, 275/65R18, 275/70R18, or 275/65R20, and all of the available options here are radial BFGoodrich All-Terrain T/A KO2 tires.
After confirming size, compare details that affect how the truck is used, including load specification, rim-width compatibility, sidewall style, and tire weight. A heavy-duty pickup can serve very different roles, so matching the tire to the truck's actual wheel setup and expected hauling or daily-use pattern matters more than choosing by appearance alone.
What sidewall styles are available for 2010 Ford Trucks F-250 Super Duty Lariat tires?
Sidewall choices for the 2010 Ford Trucks F-250 Super Duty Lariat include RWL and RBL treatments. Raised white letter appears on the available 265/70R17, 275/65R18, and 275/70R18 options, while the available 275/65R20 option uses a raised black letter sidewall.
That difference mainly affects appearance rather than the basic fitment category. A truck meant to keep a more traditional off-road look may lean toward raised white letters, while a more understated presentation may favor raised black letters, but the right size, wheel diameter, and specification still have to come first.
What rim-width specifications should I compare when choosing 2010 Ford Trucks F-250 Super Duty Lariat tires?
Rim-width range is worth comparing because the available tires are not all built around the same wheel-width window. The 265/70R17 and 275/70R18 options suit 7.0 to 9.0-inch rims, while the 275/65R18 and 275/65R20 options suit 7.5 to 9.5-inch rims.
That matters most when the truck has replacement wheels or when the existing wheels are being reused after years of ownership. A tire may be the correct diameter and still be a poor match if the wheel width falls outside the tire's accepted range, so checking both measurements helps avoid fitment surprises.
Restoration & Appearance
Which tire should I choose for a stock-style 2010 Ford Trucks F-250 Super Duty Lariat?
A stock-style approach starts with the tire size that matches the truck's exact sub-model and wheel diameter. For this 2010 F-250 Super Duty Lariat, that means staying with the proper 17-inch, 18-inch, or 20-inch radial fitment rather than choosing a tire by appearance first.
Once the fitment is confirmed, sidewall presentation becomes the next visual decision. Raised white letter and raised black letter options create different looks, but neither should be treated as automatically original to every truck, so owners chasing exact delivery-era appearance should compare against window-sticker, photo, or marque-specific references.
How does tire construction affect the appearance of a restored 2010 Ford Trucks F-250 Super Duty Lariat?
On this truck, the primary fitments are radial, so the overall restored appearance stays within a modern heavy-duty pickup tire profile rather than an earlier bias-ply look. Visual differences are more likely to come from size, wheel diameter, tread character, and sidewall treatment than from construction type changes.
That makes the decision more about presentation within the correct fitment than about converting between vintage tire constructions. An owner refining the truck's look should compare the truck's current wheels, stance, and intended style with the available raised white letter or raised black letter options before settling on a final tire choice.
Fitment, Maintenance & Road Use
Can modifications affect tire fitment on a 2010 Ford Trucks F-250 Super Duty Lariat?
Yes. Modifications can change tire fitment on a 2010 Ford Trucks F-250 Super Duty Lariat even when the tire size looks close to stock. Aftermarket wheels, different wheel offsets, suspension lifts, leveling kits, or body changes can alter clearance at the fenders, steering components, and suspension.
A truck that has been modified should be checked for actual wheel diameter and wheel width before selecting replacement tires. It also helps to inspect turning clearance and loaded suspension clearance, especially on a heavy-duty pickup that may tow or haul, because real-world movement can expose rubbing that static measurements miss.
What should I inspect before driving a 2010 Ford Trucks F-250 Super Duty Lariat on new tires?
Before road use, inspect tire pressure, wheel-lug torque, valve stems, and the general condition of the wheels themselves. It is also smart to confirm that the new tires match the truck's actual wheel diameter and that the selected specification is appropriate for the way the F-250 is used.
A short initial drive followed by a recheck can catch issues early. Look for any sign of rubbing at full steering lock, uneven seating, air loss, or contact under compression, and keep an eye on how the truck sits and tracks, particularly if it regularly carries cargo or trailer weight.
How should tires on a 2010 Ford Trucks F-250 Super Duty Lariat be maintained?
Tires on a 2010 Ford Trucks F-250 Super Duty Lariat should be maintained with regular pressure checks, visual inspections, and rotation intervals appropriate to the truck's use. Heavy-duty pickups can see uneven wear when they spend long periods unloaded and then return to towing, hauling, or rougher terrain.
A good maintenance routine includes watching for irregular tread wear, sidewall cracking, cuts, bulges, and slow air loss. Trucks that sit for extended periods still need inspections, because age and storage conditions matter as much as mileage, especially when the vehicle is expected to go back into highway or load-carrying service.
