The 2010 Ford Taurus marked the return of Ford’s full-size sedan in a more substantial, modern form, with trim levels that ranged from everyday family transportation to the high-output SHO. That wider spread of personalities matters when it is time to choose tires, because this Taurus uses four different primary radial sizes depending on sub-model and wheel package. Sizes range from 235/60R17 up to 245/45R20, with 255/45R19 also appearing on certain versions. Available choices also vary by brand, tire series, and sidewall treatment, especially in 245/45R20. The key is matching the tire to the exact trim and wheel setup already on the car before comparing style or performance-oriented options.
Which Tire Size Is Right for The 2010 Ford Taurus
The 2010 Ford Taurus uses four different primary tire sizes, and the right one depends on the exact sub-model and wheel diameter. All of them are radial tires, but they span 17-, 18-, 19-, and 20-inch rims, so confirming the wheel size is the first step before selecting a replacement. After that, the real choice becomes matching the correct size to your trim and comparing the available tire styles within that fitment.
255/45R19 is a metric radial size in which 255 is the section width in millimeters, 45 is the aspect ratio, R identifies radial construction, and 19 is the rim diameter in inches. On the 2010 Ford Taurus, this size suits versions that use a lower-profile tire on a 19-inch wheel while staying within the vehicle’s full-size sedan proportions. It is a useful size to confirm carefully because it appears on certain trims but not across the entire model line. Buyers should make sure the car is actually equipped with 19-inch wheels before using this fitment as the starting point.
235/60R17 is a metric radial size with a 235-millimeter section width, a 60-series profile, and fitment for a 17-inch rim. This size gives the 2010 Ford Taurus a more traditional modern-sedan sidewall height than the lower-profile 18-, 19-, and 20-inch options used elsewhere in the lineup. Its role is straightforward because it belongs to a specific trim rather than the full range of Taurus sub-models. Choosing this size starts with confirming the original 17-inch wheel setup and then comparing tire options that suit the car’s intended street use and ride character.
235/55R18 is a metric radial size that combines a 235-millimeter section width with a 55-series sidewall and an 18-inch rim diameter. On the 2010 Ford Taurus, it serves as an 18-inch fitment for selected versions and sits between the taller 17-inch package and the more aggressive lower-profile 19- and 20-inch combinations. That makes it important to separate from the other Taurus sizes rather than treating all trims the same. It is the right size to evaluate only after confirming the car’s 18-inch wheels and exact trim-level tire specification.
245/45R20 is a metric radial size with a 245-millimeter section width, a 45-series profile, and a 20-inch rim diameter. For the 2010 Ford Taurus, this is the largest primary fitment in the range and is associated with the versions that use a 20-inch wheel package. Product choice is meaningful here, with options from BFGoodrich, Nitto, and Pro-Trac, plus Blackwall, Redline, and RWL sidewall treatments across several tire series. This size deserves extra attention if appearance matters, since the same fitment can support either a contemporary performance look or a more distinctive visual presentation.
Tire fitment on the 2010 Ford Taurus varies by sub-model, and some trims also appear with more than one wheel-and-tire package. Identifying the exact trim and confirming the wheel diameter are the two most important steps before choosing a replacement tire.
1
2010 Ford Taurus Limited
The 2010 Ford Taurus Limited uses the 255/45R19 radial tire size. That makes 19-inch wheel confirmation especially important before replacement, since other Taurus trims use 17-, 18-, or 20-inch fitments instead.
The 2010 Ford Taurus SE uses the 235/60R17 radial size. For this trim, tire selection begins with keeping the correct 17-inch fitment in place and then comparing replacement choices that suit normal road use and overall ride character.
The 2010 Ford Taurus SEL appears with either 235/55R18 or 255/45R19 radial tires, depending on the wheel setup. That means an SEL owner should verify the actual wheel diameter on the car before comparing tire choices or assuming one SEL fitment applies to every example.
The 2010 Ford Taurus SHO uses either 245/45R20 or 255/45R19 radial tires. Because both 19-inch and 20-inch combinations occur on the SHO, wheel confirmation is the first step, followed by choosing the tire style and series that best match the car’s current setup.
The 2010 Ford Taurus SHO w/Performance Pkg. uses the 245/45R20 radial tire size. That makes it one of the clearest Taurus fitments to shop for once the 20-inch wheel setup is confirmed, with meaningful variation in available brands, series, and sidewall style.
The tire sizes listed on this page assume factory-standard vehicle configuration. The following modifications may affect tire fitment and are not reflected in this guide:
Suspension changes (lowering, lift kits, spring replacements)
Body alterations (fender modifications, custom bodywork)
If your vehicle has been modified from factory specifications, verify tire clearance before purchase.
Best 2010 Ford Taurus Tires for Sale
Available product choices center on 245/45R20, with radial options from BFGoodrich, Nitto, and Pro-Trac. Buyers can compare tire series such as g-Force and Street Pro III, along with Blackwall, Redline, and RWL sidewall treatments.
Owners of a 2010 Ford Taurus usually need to sort out the correct tire size by trim and wheel diameter first. The questions below focus on fitment, available 245/45R20 product choices, appearance differences, and practical checks before road use.
Tire Size & Fitment
What tire size fits a 2010 Ford Taurus?
The 2010 Ford Taurus uses four different tire sizes: 235/60R17, 235/55R18, 255/45R19, and 245/45R20. All are radial fitments, and the correct size depends on the specific sub-model and wheel package rather than the Taurus name alone.
The most important check is the wheel diameter already on the car, because these sizes fit 17-, 18-, 19-, and 20-inch rims. A replacement should start with the exact trim and actual wheel setup, especially on SEL and SHO models that appear with more than one tire size.
What size rim does a 2010 Ford Taurus use?
A 2010 Ford Taurus can use 17-inch, 18-inch, 19-inch, or 20-inch rims depending on the sub-model and tire size. The four primary combinations are 235/60R17 on 17-inch rims, 235/55R18 on 18-inch rims, 255/45R19 on 19-inch rims, and 245/45R20 on 20-inch rims.
That range means rim diameter should be verified before looking at tread style, sidewall appearance, or tire series. A Taurus owner who assumes all trims use the same wheel size can easily end up comparing the wrong tires, especially when shopping SEL or SHO versions with multiple fitments.
Why does the 2010 Ford Taurus have more than one tire size?
The 2010 Ford Taurus has more than one tire size because different sub-models use different wheel-and-tire packages. SE uses 235/60R17, Limited uses 255/45R19, SEL appears with either 235/55R18 or 255/45R19, and SHO models use 245/45R20 or 255/45R19 depending on configuration.
This is why trim identification matters before any replacement decision is made. The tire size is tied to the wheel diameter and overall package on the car, so the safest approach is to confirm the exact sub-model and inspect the current wheels rather than choosing by model name alone.
Choosing the Right Tire
What should I consider when choosing a 245/45R20 tire for a 2010 Ford Taurus?
A 245/45R20 tire for a 2010 Ford Taurus should first match the correct trim and 20-inch wheel setup. After that, the main comparison points are radial construction details, brand, tire series, sidewall style, and wheel-width compatibility where that specification is given.
This size has the broadest visible product variety, including BFGoodrich, Nitto, and Pro-Trac options. Looking at Blackwall, Redline, or RWL presentation can matter just as much as the series name if the goal is to match the car’s overall look while keeping the correct 20-inch fitment in place.
What sidewall styles are available for 2010 Ford Taurus tires?
For the 2010 Ford Taurus products shown in 245/45R20, available sidewall styles include Blackwall, Redline, and RWL. Blackwall appears across several performance-oriented radial options, while Redline and RWL are available in the Pro-Trac Street Pro III series.
Sidewall style does not change the need to start with the right tire size and rim diameter, but it can strongly influence the finished appearance. A Taurus owner choosing 245/45R20 tires can use sidewall treatment to keep the look subtle or add a more distinctive visual accent without changing the basic fitment.
What brands offer tires for the 2010 Ford Taurus?
The available 245/45R20 tires for the 2010 Ford Taurus come from BFGoodrich, Nitto, and Pro-Trac. Within that group, there are several series choices, including g-Force Sport Comp 2, g-Force Comp 2 AS, g-Force Phenom T/A, Nitto NT555 G2, and Pro-Trac Street Pro III.
Brand alone should not be the only deciding factor. The more useful comparison is whether the tire matches the car’s exact wheel size, supports the intended look, and offers the sidewall treatment or series character you want for that particular Taurus setup.
Restoration & Appearance
Which tire should I choose for a period-style 2010 Ford Taurus?
A period-style 2010 Ford Taurus still starts with the correct original fitment size for the exact trim, whether that is 235/60R17, 235/55R18, 255/45R19, or 245/45R20. Since this Taurus is a modern radial-fitment sedan, the appearance decision is more about wheel-and-tire proportion and sidewall presentation than bias-ply versus radial construction.
For a more restrained contemporary look, Blackwall tires suit the car naturally. On 245/45R20 applications, Redline or RWL options create a more stylized appearance, but the right choice depends on how closely the car is being kept to its original visual character and current wheel package.
How does tire construction affect the appearance of a restored 2010 Ford Taurus?
Tire construction is straightforward on the 2010 Ford Taurus because the primary fitments are radial across all listed sizes. That means the visual effect comes less from construction type and more from the tire’s profile, wheel diameter, brand styling, and sidewall treatment within the correct size.
A restored or carefully preserved Taurus will usually look most coherent when the tire matches the intended trim-level stance and wheel size. Lower-profile 19- and 20-inch fitments create a different visual balance than the 17- and 18-inch packages, so matching the car’s actual setup matters more than chasing a generic appearance trend.
Fitment, Maintenance & Road Use
Can modifications affect tire fitment on a 2010 Ford Taurus?
Yes, modifications can affect tire fitment on a 2010 Ford Taurus even when the tire size itself is correct for a stock trim. Aftermarket wheels, wheel-width changes, offset differences, suspension lowering, and body or brake changes can all alter the space available for the tire.
A Taurus that has been changed from its original setup should be checked for wheel diameter, tire clearance at full steering lock, and space around the fender and suspension. Those checks are especially important on 19-inch and 20-inch applications, where profile and package differences leave less room for assumptions.
What should I inspect before driving a 2010 Ford Taurus on new tires?
Before driving a 2010 Ford Taurus on new tires, inspect the wheel size, confirm that all four tires match the intended fitment, and look over the wheels for damage or bead-seat issues. Tire pressure should also be set correctly, and the tires should be checked for any mounting-related irregularities.
A short road test should be followed by another look for rubbing, vibration, or uneven seating, especially if the car has replacement wheels or a less common trim setup. Catching those issues early helps confirm that the new tires are working with the Taurus rather than simply bolted onto it.
What should I check before a longer drive in a 2010 Ford Taurus?
Before a longer drive in a 2010 Ford Taurus, check tire pressure, tread condition, and the sidewalls for cuts, bulges, or visible cracking. It is also wise to verify that the car is riding on the correct size for its trim and wheel package, particularly if it was purchased used.
Longer trips put more heat and sustained load into the tires, so any mismatch in size or wheel setup becomes more noticeable. A Taurus owner should also pay attention to air loss, vibration, and steering feel during the first miles, since those can point to balance, mounting, or clearance issues.
