The 2010 Dodge Trucks Ram 3500 SLT sits in the heavy-duty pickup class where payload, towing, and chassis configuration have a direct effect on tire selection. Crew Cab, Mega Cab, regular cab, single-rear-wheel, and dual-rear-wheel versions can all fall under the same model name, but they do not all use the same tire size. This Ram 3500 SLT uses radial 17-inch fitments, with 265/70R17 on single-rear-wheel configurations and 235/80R17 on DRW models. Available choices stay within BFGoodrich's All-Terrain T/A KO2 line, but load specification, rim-width range, and sidewall presentation still matter. The right pick starts with identifying the exact cab and rear-wheel setup before comparing tire details.
Which Tire Size Is Right for The 2010 Dodge Trucks Ram 3500 SLT
Two primary tire sizes apply to the 2010 Dodge Trucks Ram 3500 SLT, and both are radial tires for 17-inch wheels. The key difference is sub-model fitment: single-rear-wheel trucks use 265/70R17, while dual-rear-wheel configurations use 235/80R17. Before choosing a tire, confirm whether the truck is SRW or DRW and match that to the exact cab and drivetrain configuration.
Fit(s): 4x2 Crew Cab, 4x2 Mega Cab, 4x4 Crew Cab, and 4x4 Mega Cab
Construction: Radial|Rim: 17 in
265/70R17 is a metric radial size in which 265 is the nominal section width in millimeters, 70 is the aspect ratio, R identifies radial construction, and 17 is the rim diameter in inches. On the 2010 Dodge Trucks Ram 3500 SLT, this size belongs to single-rear-wheel configurations rather than DRW models. Available choices in this size come from BFGoodrich's All-Terrain T/A KO2 series with raised white letter sidewalls and two different load specifications. It is the size to evaluate when the truck uses a standard rear-wheel setup and a 17-inch wheel package.
Fit(s): 4x2 Crew Cab (DRW), 4x2 Mega Cab (DRW), 4x2 Reg. Cab (DRW), 4x4 Crew Cab (DRW), 4x4 Mega Cab (DRW), and 4x4 Reg. Cab (DRW)
Construction: Radial|Rim: 17 in
235/80R17 is a metric radial size that uses a narrower 235-millimeter section width and an 80-series profile on a 17-inch rim. For the 2010 Dodge Trucks Ram 3500 SLT, this size applies to dual-rear-wheel configurations, where proper fitment depends on the truck's DRW setup rather than the broader model name alone. The available BFGoodrich All-Terrain T/A KO2 option in this size uses a black sidewall presentation and a different rim-width range from the 265/70R17 fitment. This is the size to compare when the truck carries factory-style dual rear wheels.
Sub-model fitment matters on the 2010 Dodge Trucks Ram 3500 SLT because tire size changes with the truck's rear-wheel configuration. Single-rear-wheel versions use one size, while dual-rear-wheel models use another, so confirming the exact cab, drivetrain, and DRW status is the first step.
1
2010 Dodge Trucks Ram 3500 SLT 4x2 Crew Cab
The 2010 Dodge Trucks Ram 3500 SLT 4x2 Crew Cab uses the 265/70R17 radial size on a 17-inch wheel. Tire selection here centers on choosing the correct load specification within that size and confirming the wheel setup has not been changed from the intended SRW configuration.
The 2010 Dodge Trucks Ram 3500 SLT 4x2 Crew Cab (DRW) uses 235/80R17 radial tires. That makes dual-rear-wheel fitment the main consideration, so tire choice should stay focused on the proper DRW size and wheel compatibility rather than the larger SRW alternative.
The 2010 Dodge Trucks Ram 3500 SLT 4x2 Mega Cab uses the 265/70R17 radial fitment. Choosing within this size means comparing load capacity and wheel-width compatibility while making sure the truck remains on the expected single-rear-wheel setup.
The 2010 Dodge Trucks Ram 3500 SLT 4x2 Mega Cab (DRW) uses 235/80R17 radial tires on 17-inch wheels. The important next step is confirming the dual-rear-wheel arrangement and selecting a tire built around that narrower heavy-duty fitment.
The 2010 Dodge Trucks Ram 3500 SLT 4x2 Reg. Cab (DRW) uses the 235/80R17 radial size. Tire selection should stay tied to the DRW wheel package, with attention to proper width and load specification for a heavy-duty rear dual-wheel application.
The 2010 Dodge Trucks Ram 3500 SLT 4x4 Crew Cab uses 265/70R17 radial tires. That keeps the decision within the SRW fitment, where the main comparison points are load rating, 17-inch wheel compatibility, and whether the truck still carries its intended wheel package.
The 2010 Dodge Trucks Ram 3500 SLT 4x4 Crew Cab (DRW) uses 235/80R17 radial tires. For this sub-model, proper tire choice starts with the dual-rear-wheel arrangement and matching the tire to the narrower DRW wheel specification.
The 2010 Dodge Trucks Ram 3500 SLT 4x4 Mega Cab uses the 265/70R17 radial fitment. Buyers should compare the available load versions in that size and verify that wheel width remains within the intended range for the tire being considered.
The 2010 Dodge Trucks Ram 3500 SLT 4x4 Mega Cab (DRW) uses 235/80R17 radial tires on 17-inch wheels. This fitment calls for a DRW-focused selection process, with close attention to wheel width and the truck's actual rear-wheel configuration.
The 2010 Dodge Trucks Ram 3500 SLT 4x4 Reg. Cab (DRW) uses the 235/80R17 radial size. The practical priority is staying with the correct dual-rear-wheel fitment and checking that the wheel dimensions match the tire's approved range.
The tire sizes listed on this page assume factory-standard vehicle configuration. The following modifications may affect tire fitment and are not reflected in this guide:
Suspension changes (lowering, lift kits, spring replacements)
Body alterations (fender modifications, custom bodywork)
If your vehicle has been modified from factory specifications, verify tire clearance before purchase.
Best 2010 Dodge Trucks Ram 3500 SLT Tires for Sale
Available 17-inch choices for the 2010 Dodge Trucks Ram 3500 SLT center on BFGoodrich All-Terrain T/A KO2 tires. The main differences are size by sub-model, load specification, rim-width compatibility, and sidewall treatment, with raised white letters on 265/70R17 and black sidewalls on 235/80R17.
Questions for the 2010 Dodge Trucks Ram 3500 SLT usually come down to identifying the correct tire size by SRW or DRW configuration, understanding 17-inch wheel fitment, and comparing load, sidewall, and product details before putting the truck back to work.
Tire Size & Fitment
What tire size fits a 2010 Dodge Trucks Ram 3500 SLT?
The 2010 Dodge Trucks Ram 3500 SLT uses two primary tire sizes, both in radial construction: 265/70R17 and 235/80R17. The correct size depends on the truck's specific configuration rather than the model name alone, with single-rear-wheel versions using 265/70R17 and dual-rear-wheel versions using 235/80R17.
That means the first step is confirming whether the truck is SRW or DRW, then matching the tire to the exact cab and drivetrain setup. A 17-inch rim is common to both sizes, but width, rear-wheel arrangement, and load specification still need to line up with the truck's actual wheel package.
What size rim does a 2010 Dodge Trucks Ram 3500 SLT use?
The 2010 Dodge Trucks Ram 3500 SLT uses a 17-inch rim with both of its primary tire sizes. Whether the truck is fitted with 265/70R17 or 235/80R17, the rim diameter remains the same even though the tire width and profile differ between SRW and DRW configurations.
Rim diameter is only part of the fitment picture on a heavy-duty truck. Wheel width also matters, especially when comparing 265/70R17 tires with a 7.0 to 9.0 inch rim-width range and 235/80R17 tires with a 6.0 to 7.5 inch range, so the actual wheel setup should be checked before replacing tires.
Do all 2010 Dodge Trucks Ram 3500 SLT sub-models use the same tire size?
No. The 2010 Dodge Trucks Ram 3500 SLT uses different tire sizes across its sub-models, even though all of them use radial 17-inch fitments. Crew Cab, Mega Cab, and 4x4 or 4x2 layouts can share a size, but the deciding factor is whether the truck is single rear wheel or dual rear wheel.
SRW versions use 265/70R17, while DRW versions use 235/80R17. That difference matters because tire width, approved wheel range, and load specification are not the same between the two sizes, so choosing by model year alone can lead to the wrong fitment for the truck's actual rear-wheel configuration.
Choosing the Right Tire
What should I consider when choosing a tire for a 2010 Dodge Trucks Ram 3500 SLT?
Start with the correct primary size for the truck's exact setup: 265/70R17 for single-rear-wheel models or 235/80R17 for dual-rear-wheel models. From there, compare radial construction details such as load capacity, sidewall style, and the approved rim-width range for the tire you are considering.
A heavy-duty pickup puts more importance on wheel compatibility and intended use than a casual daily driver. Matching the tire to the truck's actual wheel package, rear-wheel layout, and working demands is more important than choosing by appearance alone, especially when more than one load specification exists within the same size.
What sidewall styles are available for 2010 Dodge Trucks Ram 3500 SLT tires?
Sidewall style varies by tire size on the 2010 Dodge Trucks Ram 3500 SLT. The available 265/70R17 BFGoodrich All-Terrain T/A KO2 tires use an RWL sidewall, while the available 235/80R17 KO2 uses an RBL sidewall, giving SRW and DRW fitments a different visual presentation.
That makes sidewall appearance a secondary decision after confirming the correct tire size. Buyers looking at an SRW truck will be comparing raised white letter styling in 265/70R17, while DRW owners will be working within a black sidewall 235/80R17 fitment that is tied to the truck's dual-rear-wheel setup.
What brands offer tires for the 2010 Dodge Trucks Ram 3500 SLT?
BFGoodrich is the available brand across both primary tire sizes for the 2010 Dodge Trucks Ram 3500 SLT. The product line represented here is the All-Terrain T/A KO2 series, offered in both 265/70R17 and 235/80R17 to cover SRW and DRW applications within this model.
Since the brand and series stay consistent, the real comparison shifts to fitment details inside the product range. Size by sub-model, load specification, sidewall style, and wheel-width compatibility become the important factors, especially for owners using the truck for towing, hauling, or mixed on-road and off-road service.
Restoration & Appearance
Does correct tire fitment matter for a 2010 Dodge Trucks Ram 3500 SLT restoration?
Yes. Even on a newer heavy-duty truck, correct tire fitment still matters if the goal is a clean, proper-looking restoration or an accurate stock-style presentation. The 2010 Dodge Trucks Ram 3500 SLT uses different primary sizes depending on whether the truck is single rear wheel or dual rear wheel, so size choice affects both appearance and function.
A truck restored with the wrong SRW or DRW tire size can look visually off and may also create wheel-compatibility issues. Matching the tire to the exact cab and rear-wheel configuration keeps the stance and proportions closer to how the truck was intended, while still leaving room to compare load specification and sidewall treatment.
How does tire construction affect the appearance of a restored 2010 Dodge Trucks Ram 3500 SLT?
On the 2010 Dodge Trucks Ram 3500 SLT, primary fitment remains radial, so construction choice is less about changing the truck's period character and more about staying consistent with its original-era heavy-duty presentation. Appearance differences are more likely to come from size, sidewall treatment, and whether the truck is SRW or DRW.
That keeps the visual decision focused on details such as raised white letters versus black sidewalls and the stance created by the correct 265/70R17 or 235/80R17 fitment. For a restoration-oriented truck, selecting the proper size first usually does more for authenticity of presentation than chasing a different construction type.
Fitment, Maintenance & Road Use
Can modifications affect tire fitment on a 2010 Dodge Trucks Ram 3500 SLT?
Yes. Modifications can change how a tire fits on a 2010 Dodge Trucks Ram 3500 SLT even when the tire matches the original size family for the truck's sub-model. Aftermarket wheels, altered offsets, suspension changes, lifts, or rear-wheel conversions can all affect whether 265/70R17 or 235/80R17 remains the right practical choice.
A changed wheel package can alter the rim width available to the tire, and a suspension change can affect clearance under load or during steering travel. On a truck like this, it is especially important to confirm wheel dimensions and rear-wheel configuration before assuming the factory-style size still suits the current setup.
What should I inspect before driving a 2010 Dodge Trucks Ram 3500 SLT on new tires?
Before putting a 2010 Dodge Trucks Ram 3500 SLT into service on new tires, inspect wheel condition, verify the tire size against the truck's SRW or DRW configuration, and make sure inflation is appropriate for the tire's load specification. Lug hardware, valve stems, and visible clearance around suspension and body components also deserve attention.
A short test drive followed by a recheck is a sensible next step on a heavy-duty truck. Pay attention to any rubbing, unusual vibration, or uneven stance, then confirm that the dual-rear-wheel spacing or single-rear-wheel setup looks correct with the chosen tire size and the actual 17-inch wheel package.
How often should tires on a 2010 Dodge Trucks Ram 3500 SLT be inspected?
Tires on a 2010 Dodge Trucks Ram 3500 SLT should be inspected regularly, especially because heavy-duty pickups often see towing, hauling, long idle periods, or seasonal use. Look for uneven wear, cuts, bulges, cracking, air loss, and any signs that the tire is not wearing evenly across the tread.
Frequent inspections matter even more when the truck carries substantial loads or spends time parked between uses. Checking pressure, tread condition, and sidewalls before longer trips can catch problems early, and a DRW truck should also be checked for proper spacing and matching condition across the rear tire set.
