The 2010 Dodge Trucks Dakota sits in the later chapter of Dodge’s midsize pickup story, blending everyday truck usefulness with a tougher, more substantial stance than many compact pickups of its era. Buyers looking at this exact Dakota usually need to sort out trim-specific wheel and tire fitment before anything else. This truck uses four primary radial tire sizes: 265/60R18, 265/65R17, 245/70R16, and 265/70R16, depending on sub-model. That makes wheel diameter a key first check, especially since the available product selection shown here centers on 16-inch truck tires with raised white letter all-terrain styling. For road use, replacement planning starts with matching the correct trim, rim size, and intended use.
Which Tire Size Is Right for The 2010 Dodge Trucks Dakota
The 2010 Dodge Trucks Dakota uses four primary tire sizes, and they are tied to specific sub-models and wheel diameters. Before choosing a tire, confirm the exact trim and whether the truck is on 16-inch, 17-inch, or 18-inch wheels. Once that is settled, the decision shifts to selecting the right radial tire style and, where products are available, comparing truck-oriented features such as sidewall treatment, load capacity, and rim-width compatibility.
265/60R18 is a metric radial size in which 265 is the nominal section width in millimeters, 60 is the aspect ratio, R identifies radial construction, and 18 is the wheel diameter in inches. On the 2010 Dodge Trucks Dakota, this size is one of the larger-diameter wheel fitments and belongs on 18-inch rims. It is relevant to buyers who need to preserve the truck’s existing wheel setup rather than moving to a different diameter. Confirm the exact sub-model and the actual wheels on the truck before selecting a replacement in this size.
265/65R17 is a metric radial size that uses a 265-millimeter nominal width, a 65-series profile, and a 17-inch wheel diameter. For the 2010 Dodge Trucks Dakota, this size serves specific sub-model configurations that use 17-inch rims instead of the 16-inch or 18-inch alternatives. Its role is not interchangeable with the other primary sizes simply because the width number is similar. Buyers should use this size when the truck’s trim and wheel diameter match it, then compare tire type and intended use within that fitment.
245/70R16 is a metric radial size with a 245-millimeter nominal section width, a 70-series profile, and a 16-inch rim diameter. On the 2010 Dodge Trucks Dakota, it is the 16-inch fitment used on the ST and carries a more utility-focused replacement decision than the larger wheel packages. Available product coverage in this size includes a BFGoodrich All-Terrain T/A KO2 with raised white letter sidewalls. That makes this size especially important for owners balancing correct fitment with light-truck appearance, load capacity, and intended road or trail use.
265/70R16 is a metric radial size that combines a 265-millimeter nominal width with a 70-series profile on a 16-inch wheel. For the 2010 Dodge Trucks Dakota, this size is tied to the TRX4 and should be treated as a specific trim-level fitment rather than a general substitute for every 16-inch Dakota. Product availability in this size includes a BFGoodrich All-Terrain T/A KO2 with raised white letter sidewalls and a heavier-duty load specification. It is the size to evaluate when the truck needs the TRX4 fitment and a truck-ready all-terrain presentation.
Tire fitment on the 2010 Dodge Trucks Dakota varies by sub-model, so identifying the exact trim is the first step. Some trims can use more than one wheel-and-tire combination, while others are tied to a single primary size.
1
2010 Dodge Trucks Dakota Big Horn
The 2010 Dodge Trucks Dakota Big Horn uses either 265/60R18 or 265/65R17, both in radial construction. Tire selection starts with confirming whether the truck has 18-inch or 17-inch wheels, then choosing a replacement that suits the truck’s current setup and use.
The 2010 Dodge Trucks Dakota Laramie uses the 265/60R18 radial tire size. That makes the replacement decision more straightforward, with the main focus shifting to confirming the existing 18-inch wheel fitment and choosing the right tire type for how the truck is driven.
The 2010 Dodge Trucks Dakota Lone Star uses either 265/60R18 or 265/65R17 in radial construction. Buyers should verify the wheel diameter already on the truck before comparing tires, since the correct choice depends on the actual 17-inch or 18-inch setup.
The 2010 Dodge Trucks Dakota ST uses the 245/70R16 radial tire size. That keeps fitment centered on a 16-inch wheel and makes product details such as sidewall style, load capacity, and rim-width range more important once the size is confirmed.
The 2010 Dodge Trucks Dakota TRX4 uses the 265/70R16 radial tire size. That fitment points buyers toward a 16-inch truck tire with enough attention paid to wheel width, load rating, and the type of all-terrain use the truck may see.
The tire sizes listed on this page assume factory-standard vehicle configuration. The following modifications may affect tire fitment and are not reflected in this guide:
Suspension changes (lowering, lift kits, spring replacements)
Body alterations (fender modifications, custom bodywork)
If your vehicle has been modified from factory specifications, verify tire clearance before purchase.
Best 2010 Dodge Trucks Dakota Tires for Sale
Available Dakota tire choices shown here focus on the 16-inch fitments, with BFGoodrich All-Terrain T/A KO2 options in 245/70R16 and 265/70R16. Both are radial truck tires with raised white letter sidewalls, but their load capacities, weights, and rim-width ranges differ.
Owners shopping tires for a 2010 Dodge Trucks Dakota usually need answers about trim-specific sizing, wheel diameter, product selection, and everyday truck fitment checks. The questions below focus on the exact sizes used across Dakota sub-models and the practical details that matter before road use.
Tire Size & Fitment
What tire size fits a 2010 Dodge Trucks Dakota?
The 2010 Dodge Trucks Dakota uses four primary radial tire sizes: 265/60R18, 265/65R17, 245/70R16, and 265/70R16. The correct one depends on the sub-model, since Big Horn and Lone Star can use either 17-inch or 18-inch fitments, Laramie uses 265/60R18, ST uses 245/70R16, and TRX4 uses 265/70R16.
The most important step is confirming the truck’s exact trim and actual wheel diameter before choosing a tire. Even when two sizes look close on paper, they are not the same fitment if the rim diameter differs. Checking the current wheels first helps avoid choosing a tire meant for a different Dakota setup.
What size rim does a 2010 Dodge Trucks Dakota use?
A 2010 Dodge Trucks Dakota can use 16-inch, 17-inch, or 18-inch rims, depending on sub-model and tire size. The 245/70R16 and 265/70R16 fitments use 16-inch rims, 265/65R17 uses a 17-inch rim, and 265/60R18 uses an 18-inch rim.
Rim diameter is the first fitment check because the tire must match the wheel exactly. A Dakota with 16-inch wheels cannot use a 17-inch or 18-inch tire, even if the width appears similar. Looking at the existing tire sidewall or measuring the wheel before buying is the simplest way to confirm the correct diameter.
Do all 2010 Dodge Trucks Dakota sub-models use the same tire size?
No, 2010 Dodge Trucks Dakota sub-models do not all share one tire size. Laramie uses 265/60R18, ST uses 245/70R16, TRX4 uses 265/70R16, and Big Horn and Lone Star can use either 265/60R18 or 265/65R17.
That variation means trim level matters just as much as the year, make, and model when replacing tires on this truck. Big Horn and Lone Star owners should also confirm whether the truck is equipped with 17-inch or 18-inch wheels. If the truck has been changed from stock-style wheel sizing, the wheel itself should guide the final selection.
Choosing the Right Tire
What should I consider when choosing a Dakota tire for a 2010 Dodge Trucks Dakota?
Start with the exact tire size and wheel diameter used by the truck’s sub-model, since the 2010 Dodge Trucks Dakota spans 16-inch, 17-inch, and 18-inch fitments. After that, compare construction, intended use, and any available product specifications that matter for a pickup, such as load capacity, rim-width range, and sidewall style.
A truck used mainly on pavement may call for a different type of tire than one that sees gravel, trail, or work-duty use. It also helps to check whether the Dakota still has its original wheel setup or has been modified. Matching the size first keeps the comparison focused on tires that actually belong on the truck.
What sidewall styles are available for 2010 Dodge Trucks Dakota tires?
Among the Dakota products shown here, the available 16-inch truck tires use an RWL sidewall, which means raised white letter styling. That sidewall treatment appears on the BFGoodrich All-Terrain T/A KO2 options offered in 245/70R16 and 265/70R16.
Sidewall style affects appearance as much as fitment, especially on a pickup where the tire is visually prominent. Raised white letters give the truck a more traditional light-truck presentation, while other sizes may lead to different product choices depending on the wheel package. Appearance should come after confirming the correct size and wheel diameter.
What brands offer tires for the 2010 Dodge Trucks Dakota?
The product selection shown here includes BFGoodrich for the 16-inch Dakota fitments. Specifically, the 245/70R16 and 265/70R16 sizes are represented by the BFGoodrich All-Terrain T/A KO2, a radial truck tire with raised white letter sidewalls.
Brand is only one part of the decision, so it should be weighed alongside the exact size, rim-width compatibility, tire type, and how the truck is used. On a Dakota, that matters because the available sizes are split by trim and wheel diameter. Choosing by brand alone can lead to overlooking the fitment the truck actually requires.
Restoration & Appearance
Does correct tire fitment matter for a 2010 Dodge Trucks Dakota restoration?
Yes, correct tire fitment matters on a 2010 Dodge Trucks Dakota restoration because the truck uses several different wheel-and-tire combinations depending on trim. A Laramie, ST, or TRX4 should reflect its proper size family, while Big Horn and Lone Star restorations need the right 17-inch or 18-inch wheel setup confirmed first.
Getting the size right helps the truck sit properly and preserves the intended visual balance of the wheel opening and stance. Buyers aiming for a restoration-oriented result should compare the truck’s current wheels against period sales literature, build information, or marque-specific references before deciding that a different diameter or profile belongs on the vehicle.
Which sidewall style suits a period-style 2010 Dodge Trucks Dakota?
A period-style 2010 Dodge Trucks Dakota can look especially at home with an RWL, or raised white letter, sidewall when that style fits the truck’s trim, wheel package, and intended presentation. The available 16-inch BFGoodrich All-Terrain T/A KO2 options shown here use that traditional light-truck sidewall treatment.
Appearance choices should still follow fitment, not override it. An ST or TRX4 owner can evaluate RWL styling within the correct 16-inch size, while trucks on 17-inch or 18-inch wheels need the proper size confirmed first. For buyers pursuing a more exact restoration look, trim-specific reference material remains the best way to verify presentation details.
Fitment, Maintenance & Road Use
Can modifications affect tire fitment on a 2010 Dodge Trucks Dakota?
Yes, modifications can affect tire fitment on a 2010 Dodge Trucks Dakota even when the replacement tire matches one of the factory size families. Aftermarket wheels, changes in wheel width, suspension lifts or lowering, and body or fender alterations can all change the clearance picture around the tire.
A Dakota that has been modified should be checked for actual wheel diameter, wheel width, and turning clearance before replacement tires are chosen. Looking at the current tire sidewall alone may not tell the whole story if the truck has been changed from its original setup. Clearance at full steering lock is especially worth checking on truck applications.
What should I inspect before driving a 2010 Dodge Trucks Dakota on new tires?
Before driving a 2010 Dodge Trucks Dakota on new tires, inspect basic installation and condition points such as correct tire size, proper air pressure, secure lug hardware, and visible clearance around the suspension and body. It also helps to confirm there are no cuts, bulges, or valve-stem issues before the truck returns to regular use.
A short, careful test drive is a smart follow-up after installation. Pay attention to rubbing during turns, unusual vibration, or any sign that the tires do not match the wheel setup the truck is using. Rechecking pressure after the first drive and keeping an eye on even wear can catch small problems before they become larger ones.
How should tires on a 2010 Dodge Trucks Dakota be maintained?
Tires on a 2010 Dodge Trucks Dakota should be maintained with regular pressure checks, visual inspections, and routine monitoring for uneven tread wear. A truck tire should also be watched for cuts, sidewall cracking, bulges, and slow air loss, especially if the Dakota is used for hauling, rough roads, or long periods of sitting.
Good maintenance starts with keeping the tires matched to the correct wheel diameter and using pressures appropriate for the tire and service conditions. It also helps to inspect alignment-related wear if the truck pulls or the tread wears unevenly. On low-use vehicles, age and condition matter just as much as tread depth before a longer drive.
