The 2010 Chevrolet Trucks Traverse arrived as a three-row crossover built for family hauling, highway travel, and everyday versatility rather than old-school truck duty. That mix of utility and comfort makes tire choice especially important, because the Traverse depends on the right overall size and wheel diameter to preserve its intended ride and stance. This model uses radial tires, but fitment changes by trim, with 245/70R17, 255/65R18, and 255/55R20 each tied to a different wheel package. The real choice is less about vintage-style construction and more about matching the correct trim-level size, sidewall profile, and wheel setup before comparing tire options.
Which Tire Size Is Right for The 2010 Chevrolet Trucks Traverse
The 2010 Chevrolet Trucks Traverse uses three different tire sizes, and the correct one depends on the exact sub-model and wheel diameter. LS, LT, and LTZ trims do not share the same setup, so the first step is confirming the trim level and making sure the vehicle still has its proper 17-inch, 18-inch, or 20-inch wheels before selecting a tire.
245/70R17 is a metric radial size in which 245 identifies the nominal section width in millimeters, 70 is the aspect ratio, R denotes radial construction, and 17 is the rim diameter in inches. On the 2010 Chevrolet Trucks Traverse, this size belongs to the 17-inch wheel setup used on the LS trim. Available product choice in this fitment is narrow, with a BFGoodrich All-Terrain T/A KO2 option featuring raised white letters. This size is the one to evaluate when the Traverse still carries its original LS wheel package or another verified 17-inch setup.
255/65R18 is a metric radial size that uses a 255-millimeter nominal section width, a 65-series profile, and an 18-inch rim diameter. For the 2010 Chevrolet Trucks Traverse, this size is tied to the 18-inch wheel package used on the LT trim, making trim identification essential before moving forward. The size itself reflects a taller-sidewall 18-inch configuration rather than a lower-profile appearance package. It is the right place to focus when the vehicle remains on LT-spec wheels and the goal is to maintain the proper fitment relationship between tire size and wheel diameter.
255/55R20 is a metric radial size with a 255-millimeter nominal section width, a 55-series profile, and a 20-inch rim diameter. On the 2010 Chevrolet Trucks Traverse, this size belongs to the LTZ trim and represents the largest wheel package used across the model range. Its lower-profile format gives it a different fitment character than the 17-inch and 18-inch setups, even though the overall diameter stays in a similar range. This is the size to confirm when the Traverse has LTZ wheels or any verified 20-inch configuration that matches the vehicle's current setup.
Tire fitment on the 2010 Chevrolet Trucks Traverse changes by sub-model rather than staying the same across the full range. Checking whether the vehicle is an LS, LT, or LTZ is the key step, because each trim uses a different tire size and wheel diameter.
1
2010 Chevrolet Trucks Traverse LS
The 2010 Chevrolet Trucks Traverse LS uses the 245/70R17 radial size on a 17-inch wheel setup. That makes tire selection more about confirming the vehicle still has the correct LS wheel package and then choosing an appropriate tire within that fitment.
The 2010 Chevrolet Trucks Traverse LT uses the 255/65R18 radial size with an 18-inch wheel configuration. Tire selection starts with confirming those 18-inch wheels are still on the vehicle, especially if it has seen later wheel changes or aftermarket replacements.
The 2010 Chevrolet Trucks Traverse LTZ uses the 255/55R20 radial size on a 20-inch wheel setup. The practical takeaway is simple: verify the LTZ still carries the proper 20-inch wheels before comparing tire choices, since the other Traverse trims use different diameters.
The tire sizes listed on this page assume factory-standard vehicle configuration. The following modifications may affect tire fitment and are not reflected in this guide:
Suspension changes (lowering, lift kits, spring replacements)
Body alterations (fender modifications, custom bodywork)
If your vehicle has been modified from factory specifications, verify tire clearance before purchase.
Best 2010 Chevrolet Trucks Traverse Tires for Sale
Available product choice for the 2010 Chevrolet Trucks Traverse is concentrated in 245/70R17, where BFGoodrich offers an All-Terrain T/A KO2 radial with raised white letters and a 6.5- to 8.0-inch rim-width range. Buyers comparing products should focus on matching the tire to the correct trim-level size and wheel diameter first.
These FAQs focus on the trim-specific tire sizes used on the 2010 Chevrolet Trucks Traverse, along with wheel-diameter checks, product selection, and the maintenance points that matter before regular road use.
Tire Size & Fitment
What tire size fits a 2010 Chevrolet Trucks Traverse?
The 2010 Chevrolet Trucks Traverse uses three tire sizes, depending on trim level: 245/70R17 for LS, 255/65R18 for LT, and 255/55R20 for LTZ. All three are radial sizes, and each one is tied to a different wheel diameter rather than being interchangeable across the full model range.
The most important step is matching the tire to the vehicle's actual trim and current wheels. Many used Traverses have had wheel changes over time, so checking the sidewall size already on the vehicle and confirming the wheel diameter helps prevent choosing a tire that matches the model family but not the specific setup.
What size rim does a 2010 Chevrolet Trucks Traverse use?
A 2010 Chevrolet Trucks Traverse uses one of three rim diameters, depending on sub-model: 17 inches, 18 inches, or 20 inches. The LS uses a 17-inch rim with 245/70R17, the LT uses an 18-inch rim with 255/65R18, and the LTZ uses a 20-inch rim with 255/55R20.
Wheel diameter is the first fitment detail to confirm before shopping for tires. Two Traverse trims may look similar at a glance, but a tire for a 17-inch wheel will not mount on an 18-inch or 20-inch rim, so verifying the wheel itself matters just as much as knowing the vehicle year and model.
Do all 2010 Chevrolet Trucks Traverse sub-models use the same tire size?
No, the 2010 Chevrolet Trucks Traverse sub-models do not use the same tire size. LS uses 245/70R17, LT uses 255/65R18, and LTZ uses 255/55R20, so fitment changes with the trim instead of staying common across the lineup.
That difference affects more than the sidewall number. Each trim also uses a different wheel diameter, which means tire selection should begin with trim confirmation and a look at the wheels currently on the vehicle. If the Traverse has aftermarket rims or a replacement wheel set, the actual installed setup should guide the final choice.
Choosing the Right Tire
What should I consider when choosing a 245/70R17 tire for a 2010 Chevrolet Trucks Traverse?
Start by confirming that 245/70R17 is the correct size for the specific 2010 Chevrolet Trucks Traverse, since that fitment belongs to the LS trim and a 17-inch wheel. Within that size, compare construction, rim-width compatibility, load specification, sidewall treatment, and the kind of use the vehicle will actually see.
One available choice in this size is the BFGoodrich All-Terrain T/A KO2, a radial with raised white letters, a 6.5- to 8.0-inch rim-width range, and a maximum load rating of 3,000 lbs @ 80 psi. Buyers should make sure those product traits suit the vehicle's wheel setup and intended driving use rather than selecting by size alone.
What sidewall styles are available for 2010 Chevrolet Trucks Traverse tires?
Among the currently available Traverse tire products in these fitments, raised white letter styling appears in 245/70R17. That gives the vehicle a more assertive truck-inspired look than a plain black sidewall, which can matter if appearance is part of the decision along with size and wheel compatibility.
Sidewall style should always come after correct fitment. A Traverse owner still needs to match the proper trim-level size and wheel diameter first, then decide whether the available sidewall presentation suits the vehicle's look. On a crossover like the Traverse, that choice can noticeably influence the overall visual character without changing the required tire size.
What brands offer tires for the 2010 Chevrolet Trucks Traverse?
Current product availability for the 2010 Chevrolet Trucks Traverse includes BFGoodrich in 245/70R17. That option appears as the All-Terrain T/A KO2 radial, giving LS owners with 17-inch wheels a brand-specific choice that leans toward a more rugged visual and use profile.
Brand should be treated as one part of the decision, not the whole decision. The better approach is to confirm the Traverse trim, verify the actual wheel diameter on the vehicle, and then compare the available tire's size, rim-width range, sidewall style, load specification, and intended use before settling on a specific product.
Restoration & Appearance
Which tire should I choose for a period-style 2010 Chevrolet Trucks Traverse?
A period-style approach for a 2010 Chevrolet Trucks Traverse starts with using the correct trim-level size: 245/70R17 for LS, 255/65R18 for LT, or 255/55R20 for LTZ. Since this is a modern crossover with radial fitment throughout, preserving the proper wheel-and-tire relationship matters more than searching for vintage-style construction cues.
Appearance still plays a role, especially if the vehicle is being returned to a clean, era-appropriate look. The safest path is to keep the original wheel diameter for the trim and choose a tire that complements the Traverse's intended presentation, while checking owner literature or marque-specific references if exact visual authenticity is especially important.
Does correct tire fitment matter for a 2010 Chevrolet Trucks Traverse restoration?
Yes, correct tire fitment matters on a 2010 Chevrolet Trucks Traverse restoration because each trim uses a different tire size and wheel diameter. Using the wrong combination can change the vehicle's appearance and complicate proper wheel-to-tire matching, even if the tire seems close in overall proportions.
Restoration-minded owners should verify whether the vehicle still wears its proper LS, LT, or LTZ wheel package before choosing tires. That step helps preserve the Traverse's intended visual balance and keeps the project focused on correct fitment rather than guessing from what happens to be mounted on the vehicle when it arrives for service.
Fitment, Maintenance & Road Use
Can modifications affect tire fitment on a 2010 Chevrolet Trucks Traverse?
Yes, modifications can affect tire fitment on a 2010 Chevrolet Trucks Traverse, especially when they involve wheel diameter, wheel width, suspension height, or body clearance. Since this model already uses three different trim-based tire sizes, even a small setup change can alter which tire dimensions are appropriate for the vehicle.
A Traverse with aftermarket wheels should be checked for actual rim diameter and width before any replacement tire is chosen. Suspension changes, lowering, or wheel offset differences can also influence steering and fender clearance, so the installed hardware matters just as much as the factory trim when deciding whether a size remains appropriate.
What should I inspect before driving a 2010 Chevrolet Trucks Traverse on new tires?
Before driving a 2010 Chevrolet Trucks Traverse on new tires, inspect the wheels for the correct diameter, check that the tires match the trim-level size, and confirm inflation is set appropriately for the vehicle's use. It is also worth looking over the valve stems, wheel condition, and lug hardware while the tires are being installed.
A short road test should follow, with attention to rubbing, vibration, or any sign that the wheel-and-tire package is not centered or clearing properly. On a used Traverse, this step is especially important because replacement wheels, suspension wear, or prior modifications can create issues that the tire size alone does not reveal.
How often should tires on a 2010 Chevrolet Trucks Traverse be inspected?
Tires on a 2010 Chevrolet Trucks Traverse should be inspected regularly, not just when tread appears low. Pressure, visible wear, sidewall damage, punctures, uneven shoulder wear, and slow air loss all deserve routine attention, especially on a vehicle used for family travel, cargo duty, or longer highway drives.
Regular checks become even more important if the Traverse sits for periods or sees seasonal use. Looking over the tires before longer trips helps catch cracking, bulges, or irregular wear early, and it also gives the owner a chance to confirm that all four tires still match the intended size for the vehicle's trim and wheel setup.
