2009 Dodge Trucks Ram 3500 Laramie Tires

A 2009 Dodge Trucks Ram 3500 Laramie uses either 265/70R17 or 235/80R17, depending on the exact sub-model. Non-DRW Mega Cab and Quad Cab versions use 265/70R17, while DRW Quad Cab versions use 235/80R17. Both are radial tire sizes for 17-inch wheels.

The practical decision is not just the model year and trim name, but whether the truck is single-rear-wheel or dual-rear-wheel. Check the door opening, rear axle setup, and the tires already mounted on the truck before ordering replacements. If the truck has aftermarket wheels or a changed suspension, confirm wheel width and clearance as well.

The tire fitments for the 2009 Dodge Trucks Ram 3500 Laramie use a 17-inch rim diameter. That applies to both 265/70R17 and 235/80R17, so the wheel diameter stays the same even though the tire size changes across sub-models.

Rim diameter is only part of the fitment picture on a heavy-duty truck like this. The available 265/70R17 tires suit a wider rim-width range than the 235/80R17 tire, so wheel width should also be checked before making a selection. That matters even more if the truck has been converted to different wheels or tire sizes over time.

No. The 2009 Dodge Trucks Ram 3500 Laramie does not use one tire size across every sub-model. Mega Cab and standard Quad Cab versions use 265/70R17, while Quad Cab DRW models use 235/80R17.

That difference exists because the rear-wheel arrangement changes the tire requirement. A DRW truck should be matched to the DRW size, and a non-DRW truck should stay with the single-rear-wheel fitment unless the entire wheel and tire setup has been deliberately changed. Start by confirming the exact sub-model rather than assuming every Ram 3500 Laramie uses the same tire.

Start with the correct size for the truck's exact configuration: 265/70R17 for non-DRW models and 235/80R17 for DRW Quad Cab versions. From there, compare load specification, wheel compatibility, and whether the truck is used mainly for highway driving, towing, hauling, or mixed road and job-site service.

This Ram 3500 Laramie is a heavy-duty truck, so the right choice depends on more than tread style alone. Review the tire's rim-width range, load capacity at the stated pressure, and the setup already on the truck. A truck that spends time under trailer weight or payload demands should be matched carefully to the intended duty.

The available sidewall treatments differ by size. In 265/70R17, the current options use RWL sidewalls, which means raised white letters. In 235/80R17, the available tire uses an RBL sidewall, giving the truck a black sidewall appearance.

That distinction can affect the truck's look almost as much as the tread design. Some owners prefer the more visible all-terrain presentation of raised white letters, while others want a plainer black sidewall, especially on a working DRW truck. Sidewall style should still come after the correct size, load fitment, and wheel compatibility in the decision process.

The available tires for this fitment are within the BFGoodrich All-Terrain T/A KO2 series. That means the comparison is not between several different series, but between the correct truck size and the load version that best matches the truck's wheel setup and intended use.

Because the series stays consistent, the buyer can focus on the details that matter most on a Ram 3500 Laramie: 265/70R17 versus 235/80R17, the load capacity tied to inflation pressure, and the rim-width range for each tire. That approach is more useful than treating every Ram 3500 Laramie as though it shares one interchangeable tire setup.

Yes. Even on a newer heavy-duty truck, correct tire fitment matters because it affects stance, load handling, and how the truck presents visually. A 2009 Dodge Trucks Ram 3500 Laramie should be matched to its proper 17-inch tire size by sub-model, with 265/70R17 on non-DRW versions and 235/80R17 on DRW Quad Cab models.

A restoration-oriented truck can look noticeably off if the wrong width or profile is installed, even when the wheel diameter is correct. Owners trying to preserve an authentic period-style appearance should confirm the actual truck configuration first, then compare sidewall presentation and load specification without assuming one tire size suits every version of the Laramie trim.

On this truck, the primary fitments are radial tires, so the appearance question is less about bias-ply versus radial and more about choosing the right modern heavy-duty radial presentation. The available options differ in sidewall style, with raised white letters on 265/70R17 and a black sidewall treatment on 235/80R17.

That difference can influence whether the truck looks more recreational, off-road oriented, or more work-focused. For a clean period-style restoration, tire size should stay matched to the truck's exact SRW or DRW configuration first. After that, sidewall styling becomes the visual choice that shapes how finished and authentic the truck feels.

Yes. Wheel changes, leveling kits, lift kits, suspension alterations, and axle or DRW conversions can all affect tire fitment on a 2009 Dodge Trucks Ram 3500 Laramie. Even though the primary fitments are both 17-inch sizes, wheel width, offset, and rear-wheel configuration can change what actually works on the truck.

A truck that has been modified should be checked as it sits, not simply by the badge on the fender. Measure the current wheel diameter and width, verify clearance at the front suspension and rear wheel area, and confirm that the load capacity still suits the truck's intended job. This is especially important on any truck used for towing or hauling.

Before putting a 2009 Dodge Trucks Ram 3500 Laramie back into service on new tires, inspect wheel condition, valve stems, lug hardware, and overall wheel fit. Confirm that the tires match the truck's correct size and that inflation is set appropriately for the installed tire and the truck's intended use.

A short road test should include listening for rubbing, checking steering feel, and looking again for any contact marks once the truck returns. Heavy-duty pickups also deserve a close look at suspension wear, alignment condition, and rear-wheel setup, because those issues can shorten tire life quickly even when the tire size itself is correct.

Tires on a 2009 Dodge Trucks Ram 3500 Laramie should be maintained with regular pressure checks, visual inspections, and periodic tread wear review. Watch for uneven wear, cuts, bulges, cracking, or slow air loss, and keep the tires matched as a complete set on the truck's specific SRW or DRW configuration.

Heavy-duty trucks place real demands on tires, especially when they spend time towing or carrying payload. Pressure should be checked when the tires are cold, and any change in ride, pull, or wear pattern deserves attention early. Trucks that sit for long periods still need inspection, since age and storage conditions can affect tire condition before tread wears out.