The 2008 Chrysler Trucks Pacifica came from a period when car-based crossovers were expected to blend family comfort, all-weather usefulness, and a more upscale road feel than a traditional SUV. That mix makes tire fitment especially important, because wheel and trim differences change which size belongs on the vehicle. This Pacifica uses radial tires in either 235/65R17 or 235/55R19, depending on the sub-model and wheel setup. The key choice is not bias-ply versus radial, but confirming the correct size first and then selecting the right tire for ride, appearance, and everyday road use. On a vehicle that may have seen wheel changes over time, verifying the actual rim diameter matters before any replacement.
Which Tire Size Is Right for The 2008 Chrysler Trucks Pacifica
The 2008 Chrysler Trucks Pacifica uses two primary tire sizes, and the correct one depends on the sub-model and wheel diameter. Both are radial sizes, but one fits a 17-inch rim and the other fits a 19-inch rim, so confirming the actual wheel on the vehicle is the first step before comparing tire choices.
A 235/65R17 tire uses a 235-millimeter nominal section width, a 65-series aspect ratio, radial construction, and a 17-inch rim diameter. On the 2008 Chrysler Trucks Pacifica, this size is part of the standard radial fitment and is used on several sub-model configurations. The format will feel familiar to modern buyers because it follows the common metric sizing system used on many late-model passenger vehicles. This size is the one to evaluate when the Pacifica is equipped with 17-inch wheels and the goal is maintaining correct fitment without moving to a different wheel diameter.
A 235/55R19 tire keeps the same 235-millimeter nominal width but pairs it with a lower 55-series profile and a 19-inch rim diameter. For the 2008 Chrysler Trucks Pacifica, this radial size applies to specific trim and wheel combinations rather than every version of the model. Its metric format is straightforward, but the practical difference is the required 19-inch wheel rather than a 17-inch wheel. This is the size to confirm when the Pacifica has the larger factory-style wheel setup or when the vehicle's current wheels match the 19-inch fitment.
Sub-model fitment on the 2008 Chrysler Trucks Pacifica is not completely uniform, because tire size changes with trim and wheel package. Checking the exact sub-model helps narrow the correct size, but the wheel diameter on the vehicle should still be confirmed before replacement.
1
2008 Chrysler Trucks Pacifica LX (AWD)
The 2008 Chrysler Trucks Pacifica LX (AWD) uses the 235/65R17 radial size. Tire selection here centers on staying with the correct 17-inch fitment and choosing a replacement that matches the vehicle's intended road use and wheel setup.
The 2008 Chrysler Trucks Pacifica LX (FWD) also uses the 235/65R17 radial size. That makes fitment relatively straightforward, with the main priority being confirmation of the 17-inch wheel before comparing replacement tire choices.
The 2008 Chrysler Trucks Pacifica Limited uses the 235/55R19 radial size. For this sub-model, tire selection starts with the larger 19-inch wheel fitment, so replacement shopping should stay focused on that diameter unless the vehicle has been changed from stock.
The 2008 Chrysler Trucks Pacifica Touring can use either 235/65R17 or 235/55R19, depending on the wheel setup on the vehicle. That makes wheel confirmation essential before choosing tires, since the correct replacement depends on whether the Pacifica is riding on 17-inch or 19-inch rims.
The tire sizes listed on this page assume factory-standard vehicle configuration. The following modifications may affect tire fitment and are not reflected in this guide:
Suspension changes (lowering, lift kits, spring replacements)
Body alterations (fender modifications, custom bodywork)
If your vehicle has been modified from factory specifications, verify tire clearance before purchase.
Frequently Asked Questions
Owners of a 2008 Chrysler Trucks Pacifica usually need to confirm the correct tire size by sub-model and wheel diameter first. The questions below focus on fitment, rim size, tire selection, modifications, and the maintenance checks that matter before regular road use.
Tire Size & Fitment
What tire size fits a 2008 Chrysler Trucks Pacifica?
A 2008 Chrysler Trucks Pacifica uses either 235/65R17 or 235/55R19, depending on the sub-model and wheel setup. LX AWD and LX FWD models use 235/65R17, the Limited uses 235/55R19, and the Touring can use either size.
The important step is matching the tire to the actual wheel on the vehicle rather than assuming every Pacifica uses the same size. A 17-inch tire and a 19-inch tire are not interchangeable, so checking the sidewall of the current tire and measuring wheel diameter before replacement helps prevent a fitment mistake.
What size rim does a 2008 Chrysler Trucks Pacifica use?
The 2008 Chrysler Trucks Pacifica uses either a 17-inch or 19-inch rim, depending on the tire size fitted to the vehicle. The 235/65R17 size mounts on a 17-inch rim, while the 235/55R19 size mounts on a 19-inch rim.
Rim diameter is the first thing to verify because the tire must match it exactly. A Pacifica that has had wheel changes over the years may no longer match its original trim setup, so confirming the actual wheel on the vehicle is more useful than relying on trim name alone.
Why does the 2008 Chrysler Trucks Pacifica have more than one tire size?
The 2008 Chrysler Trucks Pacifica has more than one tire size because fitment varies by sub-model and wheel package. Some versions use 17-inch wheels with 235/65R17 tires, while others use 19-inch wheels with 235/55R19 tires, and the Touring can appear with either setup.
That means the correct replacement is tied to the Pacifica's actual wheel diameter and configuration, not just the model year. Looking at the current tire sidewall, confirming the wheel size, and checking the exact trim are the most practical ways to narrow the fitment before selecting a replacement tire.
Choosing the Right Tire
What should I consider when choosing a 235/65R17 tire for a 2008 Chrysler Trucks Pacifica?
A 235/65R17 tire for a 2008 Chrysler Trucks Pacifica should first match the correct sub-model or wheel setup. This size belongs on Pacifica configurations equipped with 17-inch rims, including LX AWD and LX FWD, and it may also apply to certain Touring models.
After confirming the size, focus on road use, ride preference, and the condition of the existing wheels. A Pacifica used for regular driving benefits from staying within the correct size and construction, while any history of wheel replacement, suspension changes, or uneven tire wear should be checked before settling on a new set.
What should I consider when choosing a 235/55R19 tire for a 2008 Chrysler Trucks Pacifica?
A 235/55R19 tire is appropriate for 2008 Chrysler Trucks Pacifica configurations that use 19-inch wheels, including the Limited and some Touring models. The main requirement is confirming that the vehicle actually has the 19-inch wheel setup before comparing tire choices.
Once size is confirmed, compare tires within that fitment rather than mixing sizes across wheel diameters. It also helps to inspect wheel condition, look for signs of alignment or suspension wear, and make sure the replacement tire suits how the Pacifica is driven, especially if it sees everyday use rather than occasional short trips.
How do I choose between the available tire sizes for a 2008 Chrysler Trucks Pacifica?
Choosing between the available tire sizes for a 2008 Chrysler Trucks Pacifica is not a matter of preference alone, because the size is tied to the wheel diameter on the vehicle. The actual choice is between 235/65R17 on a 17-inch rim and 235/55R19 on a 19-inch rim.
The best approach is to confirm the sub-model, then verify the wheels currently installed on the Pacifica. That matters most on Touring models, which can use either fitment, and on any vehicle that may have had aftermarket wheels or previous tire changes that no longer match its original trim configuration.
Restoration & Appearance
Does correct tire fitment matter for a 2008 Chrysler Trucks Pacifica restoration?
Correct tire fitment matters on a 2008 Chrysler Trucks Pacifica restoration because the tire size needs to match the wheel diameter and trim-level setup used on the vehicle. A Pacifica restored with the wrong 17-inch or 19-inch fitment can look mismatched and may create unnecessary fitment complications.
Appearance is only part of the equation. Using the proper size for the wheel helps preserve intended proportions and keeps replacement choices centered on the fitment that belongs on that specific configuration, especially when a Touring or modified vehicle could otherwise be mistaken for the other wheel package.
Which tire should I choose for a period-style 2008 Chrysler Trucks Pacifica?
A period-style tire choice for a 2008 Chrysler Trucks Pacifica starts with the correct original-type fitment format for the vehicle: a modern metric radial in either 235/65R17 or 235/55R19. Since both primary sizes are radial, the focus is on matching the proper size to the wheel and trim setup.
For a restoration-oriented result, confirm whether the Pacifica should be on 17-inch or 19-inch wheels before choosing tires. A vehicle wearing the wrong diameter can change the overall presentation, so trim verification and inspection of the wheels currently installed are both important before any appearance-driven decision is made.
Fitment, Maintenance & Road Use
Can modifications affect tire fitment on a 2008 Chrysler Trucks Pacifica?
Modifications can affect tire fitment on a 2008 Chrysler Trucks Pacifica, especially if the vehicle has aftermarket wheels, suspension changes, or a different wheel diameter than its original setup. Those changes can alter which of the two primary sizes belongs on the vehicle and how much clearance is available.
Checking the actual wheel diameter, wheel width, and clearance around the strut, fender, and steering components is a smart step before replacing tires on a modified Pacifica. Even when the sidewall shows one of the correct sizes, the surrounding setup still needs to support that fitment properly.
What should I inspect before driving a 2008 Chrysler Trucks Pacifica on new tires?
Before driving a 2008 Chrysler Trucks Pacifica on new tires, inspect the wheels for damage, confirm the tire size matches the rim diameter, and make sure all four tires are properly inflated. It also helps to check for alignment issues, worn suspension parts, and any signs of rubbing or uneven previous wear.
A short local drive followed by another visual inspection can reveal problems early. Pay attention to steering feel, vibration, and whether the tires clear the body and suspension through normal turning, especially on a Touring model or any Pacifica that may not still be wearing its original wheel package.
How often should tires on a 2008 Chrysler Trucks Pacifica be inspected?
Tires on a 2008 Chrysler Trucks Pacifica should be inspected regularly, not just when replacement time arrives. A quick check for tread wear, cracking, punctures, bulges, and slow air loss is worthwhile throughout the year, especially on a vehicle that may sit for stretches and then return to regular road use.
Inspection becomes even more important when the Pacifica has mixed maintenance history or non-original wheels. Looking over the tires before longer drives, after seasonal storage, and whenever ride quality changes can help catch size, pressure, or condition issues before they turn into a larger fitment or safety problem.
