The 2007 Land Rover Trucks LR3 comes from the era when Land Rover blended genuine off-road capability with a more modern luxury-SUV footprint. Buyers are often drawn to the LR3 for its commanding stance, versatile cabin, and the kind of all-terrain presence that still feels purposeful today. Tire selection starts with two primary radial fitments, 255/60R18 and 255/55R19, and the right choice depends on the exact sub-model and wheel diameter on the vehicle. That makes this page less about choosing between old and new construction types and more about confirming fitment, understanding the sizing format, and selecting the right tire for the LR3's actual wheel setup and intended road use.
Which Tire Size Is Right for The 2007 Land Rover Trucks LR3
The 2007 Land Rover Trucks LR3 uses two primary tire sizes, and the correct one depends on sub-model and wheel diameter. Both are radial metric sizes, but one fits an 18-inch wheel and the other fits a 19-inch wheel, so the first step is confirming the exact LR3 trim and checking the wheels currently on the vehicle before selecting a tire.
255/55R19 is a modern metric radial size in which 255 identifies the nominal section width in millimeters, 55 is the aspect ratio, R indicates radial construction, and 19 is the wheel diameter in inches. On the 2007 Land Rover Trucks LR3, this size suits 19-inch wheel applications rather than the 18-inch setup used elsewhere in the range. Its dimensions place it very close in overall diameter to the 255/60R18 alternative, but the wheel diameter is different, so the tire choice must match the wheel actually on the vehicle. This size is especially important to confirm on HSE models that may appear alongside the 18-inch fitment.
255/60R18 is a modern metric radial size that uses a 255-millimeter nominal section width, a 60-series profile, radial construction, and an 18-inch rim diameter. For the 2007 Land Rover Trucks LR3, this is the primary fitment used on SE V6 and SE V8 models, and it also appears on some HSE applications. Even though its overall diameter is nearly the same as 255/55R19, the lower wheel diameter means it is tied to a different wheel package. This is the size to evaluate when the vehicle retains 18-inch wheels and the goal is straightforward replacement fitment.
Sub-model fitment matters on the 2007 Land Rover Trucks LR3 because not every version uses the same wheel and tire combination. The SE V6 and SE V8 stay with 255/60R18, while the HSE can appear with either primary size, so identifying the exact trim and wheel setup is the key first step.
1
2007 Land Rover Trucks LR3 HSE
The 2007 Land Rover Trucks LR3 HSE is the fitment that needs the closest check, because it appears with both 255/55R19 and 255/60R18 radial sizes. Tire selection starts with confirming whether the vehicle is on 18-inch or 19-inch wheels, then choosing the correct tire within that wheel package.
The 2007 Land Rover Trucks LR3 SE V6 uses the 255/60R18 radial size. That makes replacement selection more straightforward, with the main focus shifting to confirming the vehicle still has its 18-inch wheel setup and has not been changed to a different diameter.
The 2007 Land Rover Trucks LR3 SE V8 also uses the 255/60R18 radial size. For this sub-model, the practical tire decision is usually less about decoding fitment and more about verifying the current wheels before matching the tire to normal driving conditions and vehicle use.
The tire sizes listed on this page assume factory-standard vehicle configuration. The following modifications may affect tire fitment and are not reflected in this guide:
Suspension changes (lowering, lift kits, spring replacements)
Body alterations (fender modifications, custom bodywork)
If your vehicle has been modified from factory specifications, verify tire clearance before purchase.
Frequently Asked Questions
Common questions for the 2007 Land Rover Trucks LR3 usually center on choosing between 255/60R18 and 255/55R19, confirming wheel diameter by sub-model, and checking how wheel changes or age-related condition can affect road-ready fitment.
Tire Size & Fitment
What tire size fits a 2007 Land Rover Trucks LR3?
The 2007 Land Rover Trucks LR3 uses two primary tire sizes: 255/60R18 and 255/55R19. Both are radial metric sizes, but they do not serve the same wheel package. The SE V6 and SE V8 use 255/60R18, while the HSE can use either 255/60R18 or 255/55R19 depending on the wheel setup on the vehicle.
The practical decision is confirming trim and wheel diameter before shopping for tires. A 255/60R18 belongs on an 18-inch wheel, and a 255/55R19 belongs on a 19-inch wheel. Since many LR3s have seen wheel changes over time, checking the existing tire sidewall and measuring the wheel diameter is smarter than assuming fitment from trim alone.
What size rim does a 2007 Land Rover Trucks LR3 use?
A 2007 Land Rover Trucks LR3 uses either an 18-inch or 19-inch rim, depending on the tire size and sub-model configuration. The 255/60R18 fitment uses an 18-inch rim, and the 255/55R19 fitment uses a 19-inch rim. Both sizes are modern radial fitments, but the wheel diameter changes with the tire size.
That difference matters because the two tire sizes are not interchangeable across wheel diameters. Even though their overall diameters are nearly the same, the bead size must match the wheel exactly. A quick wheel check is essential on any LR3 that has had replacement wheels, upgraded trim pieces, or a used-vehicle history that may not reflect its original setup.
Do all 2007 Land Rover Trucks LR3 sub-models use the same tire size?
No. The 2007 Land Rover Trucks LR3 SE V6 and SE V8 use 255/60R18, while the HSE can use either 255/60R18 or 255/55R19. That means tire fitment is not uniform across the full LR3 lineup, even though every primary size for this model year uses radial construction.
The HSE is the version that deserves the closest confirmation, because trim alone does not narrow it to one wheel diameter. Checking the actual wheel and current sidewall marking avoids ordering the wrong size. On SE models, fitment is simpler, but it still makes sense to confirm that the vehicle has not been changed to a 19-inch wheel package.
Choosing the Right Tire
What should I consider when choosing a tire for a 2007 Land Rover Trucks LR3?
Start with the correct primary size for the vehicle: 255/60R18 or 255/55R19. On a 2007 Land Rover Trucks LR3, that choice depends first on the actual wheel diameter and then on the sub-model. Since both sizes are radial metric fitments with very similar overall diameter, the real selection issue is matching the tire to the wheel package already on the SUV.
After confirming size, think about how the LR3 is used. Daily road driving, occasional towing, family use, or mixed on-road and light-trail service can all influence tire preference. It is also worth checking the age and condition of the existing set, along with wheel condition and any signs that the suspension or alignment may affect how the next set wears.
How do I choose between the available LR3 tire sizes for a 2007 Land Rover Trucks LR3?
You do not choose freely between 255/60R18 and 255/55R19 on a 2007 Land Rover Trucks LR3 unless the vehicle also has the matching wheels. The tire size follows the wheel diameter: 18-inch wheels require 255/60R18, and 19-inch wheels require 255/55R19. On this LR3, the HSE may use either size, while SE models use 255/60R18.
That makes wheel confirmation more important than comparing the two sizes as alternatives. The outside diameter is nearly the same, but bead seat diameter is not. If the LR3 was purchased used or has aftermarket wheels, verify the wheel size directly and compare it with the tire sidewall before replacing anything on appearance alone.
What does 255/60R18 mean on a 2007 Land Rover Trucks LR3?
On a 2007 Land Rover Trucks LR3, 255/60R18 is a metric radial size. The 255 is the nominal section width in millimeters, 60 is the aspect ratio, R marks radial construction, and 18 is the wheel diameter in inches. This is the main fitment for the SE V6 and SE V8, and it also appears on some HSE configurations.
Understanding the size code helps prevent one of the most common replacement mistakes: focusing only on width while missing wheel diameter. The final number must match the wheel exactly. Since the LR3 also uses a 19-inch fitment in some versions, reading the full size code is essential before purchasing a replacement set.
Restoration & Appearance
Does correct tire fitment matter for a 2007 Land Rover Trucks LR3 restoration?
Yes. Correct tire fitment matters on a 2007 Land Rover Trucks LR3 because the vehicle uses two different wheel-diameter packages, 18-inch and 19-inch, tied to different primary tire sizes. Even on a modern SUV, the wrong tire size can affect stance, wheel compatibility, and the overall appearance of a vehicle being returned to a clean, proper presentation.
A restoration-oriented approach starts by confirming how the specific LR3 is equipped now and how it is intended to look when finished. That is especially important with HSE models, where either primary size may appear. Matching the tire to the correct wheel package preserves proportion and helps avoid an appearance that looks mismatched or improvised.
Which tire should I choose for a period-style 2007 Land Rover Trucks LR3?
A period-style tire choice for a 2007 Land Rover Trucks LR3 begins with using the proper primary size for the vehicle's wheel setup. That means 255/60R18 on the 18-inch package or 255/55R19 on the 19-inch package. Because the LR3 is a modern radial-fitment SUV, staying with the correct metric radial format is the right starting point for an authentic-looking result.
Appearance on this vehicle is shaped more by keeping the proper size and wheel diameter relationship than by moving into a different construction style. A buyer focused on presentation should confirm whether the LR3 still wears the wheel package appropriate to its trim and should avoid mixing tire sizes simply because the two options look close on paper.
Fitment, Maintenance & Road Use
Can modifications affect tire fitment on a 2007 Land Rover Trucks LR3?
Yes. Modifications can affect tire fitment on a 2007 Land Rover Trucks LR3, especially if the vehicle has aftermarket wheels, suspension changes, ride-height alterations, or body modifications. The LR3 already has two legitimate factory-style wheel diameters in play, so any later changes can make it harder to know whether the current tires still match the intended setup.
A smart check includes wheel diameter, wheel width, and clearance at full steering lock and suspension movement. Looking at the current tire sidewall is useful, but it should not be the only step if the vehicle has been changed. Any non-original setup deserves a close inspection before replacing tires based solely on model name or trim badge.
What should I inspect before driving a 2007 Land Rover Trucks LR3 on new tires?
Before driving a 2007 Land Rover Trucks LR3 on new tires, inspect the wheels for damage, confirm the tire size matches the wheel diameter, and check inflation pressure carefully. It also makes sense to look over alignment-related wear items, suspension condition, and any signs of rubbing or clearance issues, particularly on a used SUV with an unknown service history.
Road-readiness is not only about the new tires themselves. Uneven wear on the old set, vibration, or visible wheel damage can point to problems that should be addressed before regular use. A short recheck after the first miles is also worthwhile, especially to verify pressure stability and make sure the tires are seating and wearing normally.
How often should tires on a 2007 Land Rover Trucks LR3 be inspected?
Tires on a 2007 Land Rover Trucks LR3 should be inspected regularly, not just when tread looks low. Routine checks should include pressure, visible tread wear, cuts, bulges, cracking, and signs of uneven shoulder or center wear. On an LR3 that sees intermittent use, age and condition can matter just as much as mileage.
Collector-kept or second-vehicle SUVs often accumulate less wear but still need attention. Periodic inspection helps catch slow air loss, sidewall aging, or suspension-related wear before a longer drive. It is also wise to inspect after seasonal storage, after off-road use, or anytime the vehicle begins to steer differently than it did on the previous outing.
