The 2006 Ferrari 612 Scaglietti blends grand-touring comfort with front-engine V12 Ferrari character, making it a very different ownership experience from the brand’s mid-engine cars. Its long-wheelbase 2+2 layout was built for speed, refinement, and real road use, which makes correct tire sizing especially important. This car uses radial fitments in 245/40R19, 245/45R18, and 285/40R19, with front sizing depending on the wheel setup while the rear remains on a 19-inch size. Available choices focus on modern blackwall performance radials from BFGoodrich and Nitto. The key is confirming front rim diameter first, then choosing a tire that suits the car’s road use, wheel fitment, and overall presentation.
Which Tire Size Is Right for The 2006 Ferrari 612 Scaglietti
The 2006 Ferrari 612 Scaglietti uses three primary tire sizes, and the first step is confirming whether the car has 18-inch or 19-inch front wheels. Front fitment can be either 245/45R18 or 245/40R19, while the rear uses 285/40R19. Since all of these are radial sizes, the decision is less about construction type and more about matching the exact wheel setup before comparing tire series and brand options.
Fit(s): (Run-Flat Tire Option) Front and Base Front
Construction: Radial|Rim: 19 in
In 245/40R19, the 245 identifies nominal section width in millimeters, the 40 is the aspect ratio, R denotes radial construction, and 19 is the wheel diameter in inches. On the 2006 Ferrari 612 Scaglietti, this is a front fitment tied to a 19-inch wheel setup rather than a universal size across every position. Available choices are blackwall radials from BFGoodrich across g-Force Sport Comp 2, g-Force Comp 2 AS, and g-Force Phenom T/A lines. This size makes sense when the car is already equipped with 19-inch front wheels and the goal is to stay with the intended front-wheel diameter.
Fit(s): (Run-Flat Tire Option) Front and Base Front
Construction: Radial|Rim: 18 in
In 245/45R18, the 245 is the nominal section width in millimeters, 45 is the aspect ratio, R indicates radial construction, and 18 is the wheel diameter. For the 2006 Ferrari 612 Scaglietti, this size is used on the front when the car is fitted with 18-inch front wheels, so wheel confirmation matters before anything else. Product choices include blackwall radials from BFGoodrich and Nitto, with series such as g-Force Comp 2 AS, g-Force Sport Comp 2, g-Force Phenom T/A, and NT555 G2. It is the right front size to evaluate when preserving an 18-inch front-wheel setup.
In 285/40R19, the 285 identifies nominal section width in millimeters, the 40 is the aspect ratio, R means radial construction, and 19 is the wheel diameter in inches. On the 2006 Ferrari 612 Scaglietti, this is the rear tire size used with the staggered fitment, giving the car a wider rear tire than the front. Because the rear section width is substantially broader than the front sizes, it should be matched carefully to the actual rear wheel and overall setup. This size is the rear fitment to verify when replacing tires on either the Base or Run-Flat Tire Option configuration.
Fitment is consistent across the covered 2006 Ferrari 612 Scaglietti configurations in overall layout, but the front tire can be either an 18-inch or 19-inch size. Checking the exact front wheel setup matters more than the sub-model name alone when selecting replacement tires.
1
2006 Ferrari 612 Scaglietti (Run-Flat Tire Option) Front
The Run-Flat Tire Option front fitment uses a radial front tire and can appear in either 245/40R19 or 245/45R18 depending on the wheel setup. Tire selection starts with confirming the actual front rim diameter, then comparing blackwall performance-radial choices in the correct size.
2006 Ferrari 612 Scaglietti (Run-Flat Tire Option) Rear
The Run-Flat Tire Option rear fitment uses 285/40R19 in radial construction. That keeps rear sizing straightforward, but it still makes sense to confirm the wheel setup and maintain the proper staggered front-to-rear relationship when replacing tires.
The Base front fitment also uses a radial tire and can be either 245/40R19 or 245/45R18. Choosing correctly depends on the front wheel diameter currently on the car, followed by the preferred tire series and brand within that confirmed size.
The Base rear fitment uses 285/40R19 radial tires. Rear replacement is more straightforward than the front, but the tire still needs to be matched to the existing wheel and checked as part of the car’s staggered fitment package.
The tire sizes listed on this page assume factory-standard vehicle configuration. The following modifications may affect tire fitment and are not reflected in this guide:
Suspension changes (lowering, lift kits, spring replacements)
Body alterations (fender modifications, custom bodywork)
If your vehicle has been modified from factory specifications, verify tire clearance before purchase.
Best 2006 Ferrari 612 Scaglietti Tires for Sale
Available 2006 Ferrari 612 Scaglietti tire choices center on blackwall radial performance tires in the front sizes, with BFGoodrich and Nitto representing the main brand options. The product grid is most useful for comparing tire series and rim-width compatibility once the correct 18-inch or 19-inch front fitment has been confirmed.
Owners of a 2006 Ferrari 612 Scaglietti usually need to confirm front tire size first, then sort through rim fitment, staggered sizing, available radial choices, and basic road-use checks. These FAQs focus on the practical decisions that matter most for this exact model.
Tire Size & Fitment
What tire size fits a 2006 Ferrari 612 Scaglietti?
The 2006 Ferrari 612 Scaglietti uses staggered radial tire sizing. Front fitment can be either 245/40R19 or 245/45R18, while the rear size is 285/40R19. That means the car does not rely on one uniform tire size at all four corners, and the front size depends on the wheel package in place.
The practical step is to verify the actual front wheel diameter before ordering tires. A 19-inch front wheel calls for 245/40R19, while an 18-inch front wheel calls for 245/45R18. The rear remains 285/40R19, so replacement should preserve the correct front-to-rear relationship and be checked against the current wheel setup.
What size rim does a 2006 Ferrari 612 Scaglietti use?
The 2006 Ferrari 612 Scaglietti uses both 18-inch and 19-inch rim diameters, depending on position and front-wheel configuration. The rear tire size, 285/40R19, uses a 19-inch rim, while the front can use either a 19-inch rim with 245/40R19 or an 18-inch rim with 245/45R18.
That makes rim confirmation the first fitment check, especially at the front axle. Reading the tire sidewall and measuring the actual wheel diameter are both worthwhile on a car that may have seen wheel changes over time. Once the front rim diameter is confirmed, the correct front size becomes much easier to narrow down.
Why does the 2006 Ferrari 612 Scaglietti have more than one tire size?
The 2006 Ferrari 612 Scaglietti has more than one tire size because it uses a staggered setup and can also appear with different front wheel diameters. The wider 285/40R19 rear size stays constant, while the front can be either 245/40R19 or 245/45R18 depending on whether the car has 19-inch or 18-inch front wheels.
That means the buyer’s first job is identifying the wheel setup actually on the car, not assuming every 612 Scaglietti uses the same front fitment. On a grand-touring Ferrari, small differences in wheel and tire setup matter, so it is smart to confirm wheel diameter, check the current tire sidewall, and preserve the intended staggered layout.
Choosing the Right Tire
What should I consider when choosing a tire for a 2006 Ferrari 612 Scaglietti?
Start with the exact tire size for each axle position. The 2006 Ferrari 612 Scaglietti uses 285/40R19 at the rear, while the front is either 245/40R19 or 245/45R18 depending on the wheel setup. After size is confirmed, compare radial construction details such as tire series, rim-width range, load figures where stated, and overall intended use.
A touring-oriented road car and a more aggressively driven car may lead an owner toward different product lines even within the same size. It also helps to verify that the tire matches the wheel width already on the car, and to keep the staggered front-and-rear sizing balanced rather than choosing in isolation.
What brands offer tires for the 2006 Ferrari 612 Scaglietti?
BFGoodrich and Nitto are the brands represented in the available 2006 Ferrari 612 Scaglietti tire choices. BFGoodrich appears in both 245/40R19 and 245/45R18 through several g-Force series, while Nitto appears in 245/45R18 with the NT555 G2. These are all radial blackwall performance-oriented tires.
Brand alone should not decide the purchase on a car like the 612 Scaglietti. The more useful comparison is the exact size needed, the series character, the stated rim-width compatibility, and whether the tire suits the way the car is driven. Once the fitment is confirmed, brand becomes part of a broader selection process rather than the only factor.
What tire series are available for the 2006 Ferrari 612 Scaglietti?
Available series for the 2006 Ferrari 612 Scaglietti include BFGoodrich g-Force Sport Comp 2, BFGoodrich g-Force Comp 2 AS, BFGoodrich g-Force Phenom T/A, and Nitto NT555 G2. These series appear in the front sizes rather than across every listed fitment, so exact size still needs to be confirmed before comparing one tire line against another.
Series names help separate the product grid into more meaningful choices, especially when several options share the same basic size and blackwall appearance. It is worth comparing the intended use of the tire, the wheel-width range, and any stated load details instead of treating every radial in the correct size as functionally identical.
Restoration & Appearance
Which tire should I choose for a period-style 2006 Ferrari 612 Scaglietti?
A period-style approach for a 2006 Ferrari 612 Scaglietti starts with preserving the correct staggered sizing and the actual wheel diameter on the car. Since the available fitments here are modern radial metric sizes, the appearance question is less about vintage construction and more about staying with the proper front and rear proportions.
Blackwall tires suit the restrained, performance-oriented look associated with this model’s grand-touring character. If exact originality matters beyond size and general presentation, marque-specific documentation and original delivery records are worth consulting. For most owners, the safest visual starting point is the correct size on the correct wheel rather than chasing a cosmetic cue alone.
Does correct tire fitment matter for a 2006 Ferrari 612 Scaglietti restoration?
Correct tire fitment matters on a 2006 Ferrari 612 Scaglietti because the car’s stance, wheel-to-tire proportion, and staggered layout are central to how it looks and sits. Using the proper front size for the actual wheel diameter, along with the correct 285/40R19 rear size, helps preserve that intended visual balance.
Restoration-minded owners should treat tire size as both a mechanical and aesthetic decision. A tire that is merely close in diameter or width can change the presentation of the car, especially with large-diameter wheels and a low-profile sidewall. Verifying wheel size first keeps the restoration grounded in the car’s actual hardware rather than assumption.
Fitment, Maintenance & Road Use
Can modifications affect tire fitment on a 2006 Ferrari 612 Scaglietti?
Yes. Modifications can affect tire fitment on a 2006 Ferrari 612 Scaglietti, especially if the car has aftermarket wheels, altered suspension height, or changes in wheel width or offset. Since the front fitment can already vary between 18-inch and 19-inch wheels, any non-original setup deserves careful confirmation before new tires are selected.
Wheel diameter is only part of the picture. A modified car can also change inner clearance, outer fender clearance, and steering behavior at full lock. Even when the sidewall size appears familiar, it is wise to verify the actual wheel dimensions and inspect the space around the tire before assuming a replacement choice will suit the car.
What should I inspect before driving a 2006 Ferrari 612 Scaglietti on new tires?
Before driving a 2006 Ferrari 612 Scaglietti on new tires, inspect basic installation and condition items first. Confirm that front and rear sizes were mounted in the correct positions, check inflation pressure, and look over the sidewalls and tread for shipping damage, cuts, or any sign that a tire was pinched during mounting.
It also helps to verify wheel hardware torque, watch for rubbing during slow steering input, and make sure the tire clears suspension and bodywork under normal ride height. A short initial drive followed by a second visual check is a sensible routine, particularly on a staggered, low-profile setup where small fitment issues can become noticeable quickly.
What should I check before a longer drive in a 2006 Ferrari 612 Scaglietti?
Before a longer drive in a 2006 Ferrari 612 Scaglietti, check tire pressure, tread condition, and any visible cracking, bulges, or cuts. On a collector-oriented grand tourer that may not be driven daily, tire age and slow air loss deserve as much attention as tread depth. The correct front and rear sizes should also be confirmed visually.
A longer trip is also a good reason to inspect wheel condition and make sure there is no evidence of rubbing or uneven wear. Tires that have spent long periods parked can look acceptable at a glance while still needing closer inspection. A careful pre-drive walkaround is especially worthwhile on a car with low-profile radial fitments.
