The 2000 Acura NSX sits in the later years of Honda and Acura’s aluminum mid-engine flagship, a car admired for its precision, everyday usability, and distinctly analog performance feel. Owners shopping tires for an NSX usually need to think in pairs, because this car uses a staggered setup with 215/45R16 in front and 245/40R17 in the rear. Both are radial metric sizes, so the real decision is not whether the car takes one universal size, but how closely the replacement matches the intended front-to-rear balance. That makes wheel confirmation, product choice, and careful attention to the car’s actual setup especially important.
Which Tire Size Is Right for The 2000 Acura NSX
The 2000 Acura NSX uses two primary tire sizes, with 215/45R16 on a 16-inch front wheel and 245/40R17 on a 17-inch rear wheel. Because the fitment is staggered, the first step is confirming whether you are replacing the front tires, the rear tires, or a full set, then matching each size to the correct wheel position.
215/45R16 is a metric radial size in which 215 identifies the nominal section width in millimeters, 45 is the aspect ratio, R denotes radial construction, and 16 is the rim diameter in inches. On the 2000 Acura NSX, this size serves the front position and helps define the car’s staggered fitment. The key buying decision here is less about sidewall style or brand variety and more about preserving the intended front tire sizing relationship to the rear. It is a size that should be chosen with close attention to wheel position and any changes from the original-style setup.
245/40R17 is a metric radial size where 245 is the nominal section width in millimeters, 40 is the aspect ratio, R indicates radial construction, and 17 is the rim diameter in inches. On the 2000 Acura NSX, this is the rear tire size, so it carries the wider half of the staggered arrangement. Available choices in this size include BFGoodrich options in the g-Force Comp 2 AS, g-Force Sport Comp 2, and g-Force Phenom T/A series, all in Blackwall form. Comparing rim-width recommendations, load figures where stated, and the car’s intended use will help narrow the right rear tire choice.
Fitment is consistent across the covered NSX and NSX-T configurations, but tire size still depends on wheel position rather than trim name alone. Checking whether you are working on the front or rear axle matters more than choosing between the two sub-model labels.
1
2000 Acura NSX Base Front
The 2000 Acura NSX Base Front uses the 215/45R16 radial size as the front half of the car’s staggered tire arrangement. Tire selection here should focus on maintaining the correct front sizing relationship and confirming that the wheel and suspension setup still match stock-style dimensions.
The 2000 Acura NSX Base Rear uses the wider 245/40R17 radial size on a 17-inch rear wheel. That makes the rear position the main place to compare available tire series and rim-width specifications while keeping the intended staggered balance of the car in mind.
The 2000 Acura NSX T Front uses the same 215/45R16 radial front tire size as the fixed-roof car. Selection is mostly about preserving correct front fitment and confirming that no aftermarket wheel or suspension changes have altered the space available at the front of the car.
The 2000 Acura NSX T Rear uses the same 245/40R17 radial rear size as the standard NSX. That gives the rear position the same product-comparison considerations, especially rim-width compatibility and choosing a tire that suits how the car is actually driven.
The tire sizes listed on this page assume factory-standard vehicle configuration. The following modifications may affect tire fitment and are not reflected in this guide:
Suspension changes (lowering, lift kits, spring replacements)
Body alterations (fender modifications, custom bodywork)
If your vehicle has been modified from factory specifications, verify tire clearance before purchase.
Best 2000 Acura NSX Tires for sale
Available rear tire choices for the 2000 Acura NSX center on 245/40R17 BFGoodrich radials, all in Blackwall form, with options across the g-Force Comp 2 AS, g-Force Sport Comp 2, and g-Force Phenom T/A series. Comparing rim-width ranges, load figures where stated, and series character is the main job in the product grid.
Owners usually want to confirm the NSX’s staggered front and rear sizes, understand the 16-inch and 17-inch wheel fitment, and sort through rear tire choices without upsetting the car’s intended balance. These answers focus on fitment, product selection, and practical road-use checks.
Tire Size & Fitment
What tire size fits a 2000 Acura NSX?
The 2000 Acura NSX uses a staggered tire setup rather than one size at all four corners. Front fitment is 215/45R16, while rear fitment is 245/40R17, and both are radial metric sizes matched to different wheel diameters and positions on the car.
That means tire selection starts with identifying whether you need front tires, rear tires, or a full set. Mixing up the two sizes can upset the intended fitment, so the wheel position, wheel diameter, and the car’s current wheel setup should all be confirmed before purchasing replacement tires.
What size rim does a 2000 Acura NSX use?
The 2000 Acura NSX uses two rim diameters as part of its staggered arrangement. The front tire size, 215/45R16, mounts on a 16-inch rim, while the rear tire size, 245/40R17, mounts on a 17-inch rim.
Rim diameter is the first hard fitment check because a 16-inch tire cannot be mounted on a 17-inch wheel, and vice versa. It also helps to confirm wheel width and any wheel changes from stock-style dimensions, especially on a mid-engine performance car where front and rear tire relationships matter.
Do all 2000 Acura NSX sub-models use the same tire size?
The covered 2000 Acura NSX Base and NSX-T configurations share the same staggered tire layout. Both use 215/45R16 in front and 245/40R17 in the rear, so the difference is not between those sub-models but between the front and rear wheel positions.
That makes fitment straightforward once the axle position is known. A buyer replacing tires on either sub-model should focus less on the trim badge and more on keeping the correct front-to-rear sizing, especially if the car has aftermarket wheels, alignment changes, or suspension modifications that may affect clearance.
Choosing the Right Tire
What should I consider when choosing a 245/40R17 tire for a 2000 Acura NSX?
Choosing a 245/40R17 rear tire for a 2000 Acura NSX starts with confirming the correct size, radial construction, and wheel position. Available choices in this size include several BFGoodrich offerings, so the comparison usually comes down to tire series, rim-width compatibility, load figures where stated, and how the car is used.
A careful buyer should also keep the NSX’s staggered setup in mind rather than selecting the rear tire in isolation. Matching the rear choice to the front size relationship, checking the actual wheel width, and verifying clearance on a car with any wheel or suspension changes will lead to a more confident selection.
What brands offer tires for the 2000 Acura NSX?
The available product selection for the 2000 Acura NSX rear size centers on BFGoodrich. In 245/40R17, the brand appears across several g-Force series, giving owners multiple rear-tire choices within the correct size and radial construction.
Brand alone should not be the only deciding factor. It is smarter to compare the specific tire series, the stated rim-width range, and any load information that accompanies the tire, then make sure the final choice still suits the NSX’s front-to-rear stagger and the car’s actual wheel setup.
What tire series are available for the 2000 Acura NSX?
For the 2000 Acura NSX rear tire size, 245/40R17 is available in BFGoodrich’s g-Force Comp 2 AS, g-Force Sport Comp 2, and g-Force Phenom T/A series. All are radial Blackwall tires, but they are presented as distinct series rather than one uniform rear-tire option.
Series differences matter because they give the buyer something meaningful to compare beyond size alone. Looking at the series name together with rim-width guidance, weight, and any stated maximum load figure can help narrow the best match for the car’s intended road use and current wheel configuration.
Restoration & Appearance
Does correct tire fitment matter for a 2000 Acura NSX restoration?
Correct tire fitment matters on a 2000 Acura NSX because the car uses a deliberate staggered combination of 215/45R16 front and 245/40R17 rear. Even on a restoration-oriented car, preserving the proper size relationship is important to maintain the visual stance and overall setup the chassis was built around.
Appearance is only one part of that decision. A restoration-minded owner should also confirm wheel dimensions, check whether the car still carries stock-style wheels, and avoid assuming that a similar-looking size will serve the same role without affecting clearance or the front-to-rear balance of the package.
How does tire construction affect the appearance of a restored 2000 Acura NSX?
On the 2000 Acura NSX, tire construction is straightforward because the primary fitment is radial at both ends of the car. That means the appearance question is less about choosing between bias-ply and radial and more about selecting a tire within the correct modern metric sizes that preserves the car’s intended stance.
The most visible differences will usually come from the exact tire series and the overall presentation of the sidewall rather than a change in construction type. Owners chasing highly exact originality may still want to compare against period photos, marque references, or other vehicle-specific documentation before finalizing a restoration choice.
Fitment, Maintenance & Road Use
Can modifications affect tire fitment on a 2000 Acura NSX?
Yes, modifications can affect tire fitment on a 2000 Acura NSX, even when the tire size itself looks correct. Aftermarket wheels, changes in wheel width or offset, lowering, spring changes, and body or suspension alterations can all influence how 215/45R16 front and 245/40R17 rear tires sit in the car.
A modified NSX should be checked carefully for steering clearance, inner suspension clearance, and fender space before replacement tires are chosen. It also helps to confirm that the existing wheel diameters still match the intended front and rear sizes, since the factory-style stagger depends on separate 16-inch and 17-inch wheel positions.
What should I inspect before driving a 2000 Acura NSX on new tires?
Before driving a 2000 Acura NSX on new tires, inspect the wheels for correct diameter and condition, verify that the front and rear sizes are mounted in the proper positions, and check inflation pressure, tread seating, and valve-stem condition. A quick visual look for rubbing points is also worthwhile on a low-clearance performance car.
The car itself deserves attention too. Suspension wear, alignment condition, and brake or wheel-bearing issues can affect how a new set feels on the road, so an owner should take a cautious first drive and listen for contact, vibration, or pull that suggests the setup needs another fitment or mechanical check.
What should I check before a longer drive in a 2000 Acura NSX?
Before a longer drive in a 2000 Acura NSX, confirm that the front 215/45R16 and rear 245/40R17 tires are properly inflated, free from cuts or bulges, and showing even tread condition. It is also smart to inspect for sidewall aging, especially on cars that spend long periods parked between drives.
Longer trips put more emphasis on small problems that are easy to miss around town. Checking for slow air loss, verifying lug torque, and making sure there is no interference at full steering lock or over suspension movement can help avoid surprises, particularly if the car has seen wheel changes or limited recent use.
