The 1993 Subaru Loyale came at the end of Subaru’s long-running EA-era formula, a practical compact known for light weight, straightforward engineering, and all-weather usefulness. Buyers still gravitate to it today because it occupies a very specific place between older Subaru simplicity and newer mainstream compact cars. Tire selection on the 1993 Subaru Loyale depends on the sub-model, with 175/70R13 used on the Base and 165R13 used on the Wagon (4WD), both in radial construction on 13-inch rims. That leaves room to compare metric and Euro-metric sizing, along with brands such as Avon, Michelin, and Dunlop. The right choice comes down to matching the exact body configuration, preserving the intended look, and confirming wheel compatibility before installation.
Which Tire Size Is Right for The 1993 Subaru Loyale
The 1993 Subaru Loyale uses two primary tire sizes, and the correct one depends on the exact sub-model. Both are radial tires mounted on 13-inch rims, so the first step is confirming whether the car is a Base or a Wagon (4WD). Once that is settled, the decision shifts to the tire’s sizing format, brand, series, and whether a more modern or more classic radial presentation better suits the car.
175/70R13 is a metric radial size in which 175 is the nominal section width in millimeters, 70 is the aspect ratio, R identifies radial construction, and 13 is the rim diameter in inches. On the 1993 Subaru Loyale, this size is used on the Base model and represents a modern metric radial format rather than an older numeric or alphanumeric vintage size. Available choices in this size include Avon’s CR6ZZ in a blackwall design. It is the size to evaluate when the car retains the Base-model wheel setup and you want to stay with the correct 13-inch radial fitment.
165R13 is a Euro-metric radial size in which 165 is the nominal section width in millimeters, R indicates radial construction, and 13 identifies the rim diameter in inches. This format does not state an aspect ratio in the size itself and is commonly associated with an 80-series style radial profile. For the 1993 Subaru Loyale, it applies to the Wagon (4WD) and is available in blackwall form from Michelin and Dunlop across several series, including XAS-FF, XAS, and SP Sport Aquajet. It is the key size to confirm when the car is a 4WD wagon rather than the Base model.
Sub-model fitment matters on the 1993 Subaru Loyale because the covered versions do not share the same primary tire size. Both use 13-inch radial tires, but choosing correctly starts with confirming whether the car is a Base model or a Wagon (4WD).
1
1993 Subaru Loyale Base
The 1993 Subaru Loyale Base uses a 175/70R13 radial tire on a 13-inch rim. Tire selection here centers on staying with the correct modern metric size while comparing the available brand, series, and wheel-width compatibility for the existing setup.
The 1993 Subaru Loyale Wagon (4WD) uses a 165R13 radial tire on a 13-inch rim. That makes the main decision less about construction and more about choosing among classic Euro-metric radial offerings while confirming the wagon still has the proper wheel configuration.
The tire sizes listed on this page assume factory-standard vehicle configuration. The following modifications may affect tire fitment and are not reflected in this guide:
Suspension changes (lowering, lift kits, spring replacements)
Body alterations (fender modifications, custom bodywork)
If your vehicle has been modified from factory specifications, verify tire clearance before purchase.
Best 1993 Subaru Loyale Tires for Sale
Available 13-inch radial choices for the 1993 Subaru Loyale include Avon, Michelin, and Dunlop options in blackwall form. The main differences are tied to the correct sub-model size, tire series such as CR6ZZ, XAS-FF, XAS, and SP Sport Aquajet, and rim-width compatibility.
Common 1993 Subaru Loyale tire questions usually come down to identifying the right sub-model size, understanding 13-inch radial fitment, and comparing available brands and tire series before putting the car back on the road.
Tire Size & Fitment
What tire size fits a 1993 Subaru Loyale?
The 1993 Subaru Loyale uses two tire sizes, depending on the sub-model. The Base model uses 175/70R13, while the Wagon (4WD) uses 165R13. Both are radial tires designed for 13-inch rims, so the key difference is not construction type or wheel diameter, but the exact tire size assigned to each version of the Loyale.
Choosing between those two sizes starts with identifying the car correctly, because they are not interchangeable fitment assumptions across the whole model line. Check the sub-model, confirm the wheel setup actually on the car, and compare the installed tire size against the intended use before selecting among the available radial products.
What size rim does a 1993 Subaru Loyale use?
The 1993 Subaru Loyale uses a 13-inch rim with both of its primary tire sizes. That applies to the 175/70R13 fitment used on the Base model and the 165R13 fitment used on the Wagon (4WD). The common rim diameter simplifies the wheel question, but the correct tire size still depends on the specific Loyale sub-model.
Rim diameter is only one part of the fitment picture, so it is still worth confirming the wheel width and the actual wheels mounted on the car. Older vehicles are often changed over time, and a Loyale with replacement wheels may need closer comparison before a new tire is selected.
Do all 1993 Subaru Loyale sub-models use the same tire size?
No, the covered 1993 Subaru Loyale sub-models do not use the same tire size. The Base model uses 175/70R13, while the Wagon (4WD) uses 165R13. Both sizes are radial and both mount on 13-inch rims, but the size itself changes with the sub-model.
That distinction matters because the tire options, sizing format, and overall appearance differ between the two fitments. A buyer should confirm the exact Loyale version first, then verify the wheels on the car, especially if it has been modified or if the currently installed tires do not match the expected sub-model size.
Choosing the Right Tire
What should I consider when choosing a tire for a 1993 Subaru Loyale?
Start with the exact fitment assigned to the sub-model. A 1993 Subaru Loyale Base uses 175/70R13, while the Wagon (4WD) uses 165R13, and both are radial tires for 13-inch rims. From there, compare the available tire series, brand, and whether the tire’s overall look suits a more modern driver-style presentation or a more classic radial appearance.
Wheel compatibility should be checked before ordering, especially on an older car that may not still wear its original wheels. It also helps to think about how the Loyale will be used, since a lightly driven collector car, a maintained driver, and a restored wagon may lead you toward different product choices within the correct size.
What brands offer tires for the 1993 Subaru Loyale?
Tires for the 1993 Subaru Loyale are available from Avon, Michelin, and Dunlop across the applicable 13-inch radial sizes. Avon appears in 175/70R13 with the CR6ZZ series, while 165R13 options include Michelin XAS-FF, Michelin XAS, and Dunlop SP Sport Aquajet. All of the listed products use blackwall sidewalls.
Brand choice should follow fitment first, since the Base and Wagon (4WD) do not share the same primary tire size. After the size is confirmed, compare the available series and wheel-width compatibility to see which option best matches the Loyale’s setup, intended use, and preferred appearance.
What tire series are available for the 1993 Subaru Loyale?
The available tire series for the 1993 Subaru Loyale include Avon CR6ZZ in 175/70R13, plus Michelin XAS-FF, Michelin XAS, and Dunlop SP Sport Aquajet in 165R13. Those series are tied to the correct sub-model size rather than being universal across every Loyale. Each remains a radial tire on a 13-inch rim.
Series choice matters because it shapes the range of products you can compare once the correct size is identified. Rather than treating the page as one-size-fits-all, match the series to the right sub-model first, then review wheel-width compatibility and the kind of visual presentation you want from the finished tire setup.
Restoration & Appearance
Which tire should I choose for a period-style 1993 Subaru Loyale?
A period-style 1993 Subaru Loyale tire choice starts with using the correct sub-model size: 175/70R13 for the Base or 165R13 for the Wagon (4WD). Since both are radial fitments, the appearance question is more about the sizing style and tire series than about deciding between bias-ply and radial construction.
The 165R13 fitment carries a classic Euro-metric radial presentation that may appeal to buyers preserving an older import look, while 175/70R13 reads as a more modern metric size. For a restoration where exact historical presentation matters, compare the tire’s visual character against marque-specific references before making the final choice.
How does tire construction affect the appearance of a restored 1993 Subaru Loyale?
On the 1993 Subaru Loyale, construction is straightforward because the primary fitments are radial tires rather than bias-ply. That means the appearance difference is less about carcass type and more about the sizing convention, tire series, and the subtle visual character of a modern metric radial versus a classic Euro-metric radial.
A restored Loyale can look noticeably different depending on whether it wears the Base model’s 175/70R13 or the Wagon (4WD) size of 165R13. Staying with the correct fitment for the sub-model helps preserve the car’s proportions, and it keeps the finished look closer to the kind of road-going presentation buyers expect from this era.
Fitment, Maintenance & Road Use
Can modifications affect tire fitment on a 1993 Subaru Loyale?
Yes, modifications can affect tire fitment on a 1993 Subaru Loyale even though the factory-style fitments both use 13-inch radial tires. Aftermarket wheels, suspension changes, altered ride height, or body repairs can all change the space available around a 175/70R13 or 165R13 tire and may also affect wheel-width compatibility.
A modified Loyale should be checked carefully before installing new tires. Confirm the actual wheel diameter and width, inspect steering and fender clearance at full lock and full compression, and make sure the selected tire still suits the car’s intended use instead of assuming the original sub-model fitment remains unchanged.
What should I inspect before driving a 1993 Subaru Loyale on new tires?
Before driving a 1993 Subaru Loyale on new tires, inspect the wheels, valve stems, and overall condition of the suspension and steering components. It also helps to confirm the tire size matches the correct sub-model, since the Base uses 175/70R13 and the Wagon (4WD) uses 165R13, even though both fit 13-inch rims.
Tire pressure, visible clearance, and the condition of wheel hardware deserve attention before road use. An older Loyale that has spent long periods parked should also be checked for alignment issues, dragging brakes, and uneven wear patterns, because those problems can affect how a fresh set of tires behaves once the car is back in service.
How should tires on a collector 1993 Subaru Loyale be maintained?
Tires on a collector 1993 Subaru Loyale should be inspected regularly for cracking, bulges, cuts, uneven wear, and slow air loss, even if the car is driven sparingly. Collector vehicles often age their tires through time and storage as much as through mileage, so condition matters just as much as tread depth on either Loyale fitment.
Storage habits make a real difference on a low-use Subaru. Keep the car away from prolonged heat, direct sunlight, excess moisture, and ozone sources, maintain proper inflation, and move or drive it often enough to avoid long-term flat spotting. Periodic checks of wheel condition and suspension health also help protect the tires over time.
