The 1992 Mitsubishi Eclipse came from the first generation of Diamond-Star-era sport compacts, a period when sharp hatchback styling and trim-specific performance differences made tire fitment more configuration-sensitive than many modern buyers expect. Base and GS models stayed with a 14-inch package, while the higher-spec DOHC, turbocharged, GST, and GSX versions moved to a larger 16-inch setup. That means the tire decision starts with identifying the exact sub-model and wheel diameter, then choosing within the correct radial size. Available options range from blackwall sport-oriented radials to whitewall alternatives, so appearance, intended road use, and wheel compatibility all matter before making a final selection.
Which Tire Size Is Right for The 1992 Mitsubishi Eclipse
The 1992 Mitsubishi Eclipse uses two primary tire sizes, and the difference comes down to sub-model and wheel diameter. Base and GS models use 185/70R14 on a 14-inch rim, while GS DOHC, GS Turbo, GST, and GSX models use 205/55R16 on a 16-inch rim. Before choosing a tire, confirm the exact sub-model and make sure the car still has the wheel diameter intended for that fitment.
185/70R14 is a metric radial size in which 185 is the nominal section width in millimeters, 70 is the aspect ratio, R identifies radial construction, and 14 is the rim diameter in inches. On the 1992 Mitsubishi Eclipse, this size belongs to the 14-inch wheel fitment used on Base and GS models. Available choices include blackwall designs from Avon, Dunlop, Michelin, and Vredestein, along with a wide whitewall Silvertown Radial from BFGoodrich. This size suits buyers who need to stay with the smaller-wheel setup while deciding between a traditional appearance and a more understated blackwall look.
205/55R16 is a metric radial size with a 205-millimeter nominal section width, a 55-series profile, and a 16-inch rim diameter. On the 1992 Mitsubishi Eclipse, it is used on the larger-wheel fitment found on GS DOHC, GS Turbo, GST, and GSX models. Product choices in this size include several BFGoodrich g-Force series tires, the Michelin SX MXX3 N2, and an American Classic Radial with a wide whitewall sidewall treatment. This size is the right starting point when the car uses the 16-inch setup and the goal is to match the intended wheel package before comparing style and series differences.
Sub-model fitment matters on the 1992 Mitsubishi Eclipse because tire size changes with the vehicle’s wheel package. Base and GS models share the smaller 14-inch radial size, while the other covered sub-models use the larger 16-inch radial fitment, so confirming the exact trim is the first step before comparing tires.
1
1992 Mitsubishi Eclipse Base
The 1992 Mitsubishi Eclipse Base uses the 185/70R14 radial fitment on a 14-inch wheel package. Tire selection here is mostly about choosing the right look and product character within that size while confirming the car still retains the proper wheel diameter.
The 1992 Mitsubishi Eclipse GS shares the 185/70R14 radial size used on the 14-inch setup. That keeps fitment straightforward, but it still helps to verify the current wheels before choosing between blackwall touring-style options and a more distinctive whitewall presentation.
The 1992 Mitsubishi Eclipse GS DOHC uses the 205/55R16 radial fitment tied to the 16-inch wheel package. Tire selection should start with keeping that size and wheel diameter aligned, then comparing the available series and sidewall treatments that suit the car’s use and appearance goals.
The 1992 Mitsubishi Eclipse GS Turbo uses the 205/55R16 radial size on a 16-inch rim. That means the practical decision is not between primary sizes, but between the available radial tire series and checking that the current wheels still match the intended fitment.
The 1992 Mitsubishi Eclipse GST uses the 205/55R16 radial fitment associated with the larger wheel package. Buyers should confirm that the car still carries 16-inch wheels, then compare the available blackwall and whitewall options based on driving use and presentation.
The 1992 Mitsubishi Eclipse GSX uses 205/55R16 radial tires on a 16-inch setup. Staying with the proper size is the key fitment step, after which the decision becomes choosing among the available radial series and confirming wheel compatibility on a car that may have been modified over time.
The tire sizes listed on this page assume factory-standard vehicle configuration. The following modifications may affect tire fitment and are not reflected in this guide:
Suspension changes (lowering, lift kits, spring replacements)
Body alterations (fender modifications, custom bodywork)
If your vehicle has been modified from factory specifications, verify tire clearance before purchase.
Best 1992 Mitsubishi Eclipse Tires for Sale
Available 1992 Mitsubishi Eclipse tires vary by size, brand, tire series, and sidewall treatment. The 14-inch fitment includes BFGoodrich, Avon, Dunlop, Michelin, and Vredestein choices, while the 16-inch fitment includes BFGoodrich, Michelin, and American Classic options in blackwall and wide whitewall styles.
Showing 6 of 10
Radial Tires
BFGoodrich Silvertown Radial | 2.25 Inch Whitewall | 185/70R14
Owners usually need to sort out the exact tire size by sub-model first, then compare wheel diameter, radial tire choices, sidewall appearance, and basic road-use checks. These questions focus on the fitment decisions that matter most for a 1992 Mitsubishi Eclipse.
Tire Size & Fitment
What tire size fits a 1992 Mitsubishi Eclipse?
A 1992 Mitsubishi Eclipse uses one of two radial tire sizes: 185/70R14 or 205/55R16. Base and GS models use 185/70R14, while GS DOHC, GS Turbo, GST, and GSX models use 205/55R16. Both are primary fitments, but they do not apply to the same sub-models.
The practical step is to identify the exact trim and confirm the wheel diameter currently on the car before choosing a tire. Many older sport compacts have seen wheel changes over time, so the original sub-model fitment and the wheels on the car now both matter when selecting the correct size.
What size rim does a 1992 Mitsubishi Eclipse use?
The 1992 Mitsubishi Eclipse uses either a 14-inch or 16-inch rim, depending on sub-model. Base and GS models use the 14-inch fitment paired with 185/70R14 tires, while GS DOHC, GS Turbo, GST, and GSX models use the 16-inch fitment paired with 205/55R16 tires.
Wheel diameter needs to be confirmed before any tire purchase because a 14-inch tire cannot be mounted on a 16-inch wheel, and a 16-inch tire cannot be mounted on a 14-inch wheel. Checking the sidewall size already on the car and measuring the wheel if needed helps avoid ordering the right size for the wrong setup.
Do all 1992 Mitsubishi Eclipse sub-models use the same tire size?
No. The 1992 Mitsubishi Eclipse has split fitment by sub-model. Base and GS models use 185/70R14, while GS DOHC, GS Turbo, GST, and GSX models use 205/55R16. The difference also corresponds to different rim diameters, so trim level matters as much as tire size.
That split means a buyer should not assume one Eclipse tire size applies across the whole model line. Verifying the exact sub-model is the cleanest starting point, and it is also smart to confirm whether the car still carries its intended wheels if it has been altered by a previous owner.
Choosing the Right Tire
What should I consider when choosing a 1992 Mitsubishi Eclipse tire?
Start with the correct primary size for the sub-model: 185/70R14 for Base and GS, or 205/55R16 for GS DOHC, GS Turbo, GST, and GSX. From there, compare radial construction details such as rim-width compatibility, load figures where stated, sidewall appearance, and the character of the tire series available in that size.
The right choice depends on how the car will be used and how you want it to look. A buyer keeping a stock-style wheel package may focus on proper size and a traditional appearance, while someone prioritizing a sport-oriented presentation may pay closer attention to the available blackwall performance-style series.
What sidewall styles are available for 1992 Mitsubishi Eclipse tires?
The available sidewall styles for a 1992 Mitsubishi Eclipse include blackwall and wide whitewall, depending on tire size and series. In 185/70R14, blackwall options are joined by a BFGoodrich Silvertown Radial with a 2.25-inch whitewall. In 205/55R16, blackwall choices are available alongside an American Classic Radial with a 1.50-inch whitewall.
That gives buyers a clear appearance choice within the correct fitment. A blackwall tire usually suits a more understated or sport-oriented presentation, while a whitewall changes the visual character of the car substantially. Sidewall style should always be chosen after the correct size and wheel diameter have already been confirmed.
What brands offer tires for the 1992 Mitsubishi Eclipse?
Brands available for the 1992 Mitsubishi Eclipse include BFGoodrich, Avon, Dunlop, Michelin, Vredestein, and American Classic. The 14-inch 185/70R14 fitment has the broadest brand spread, while the 16-inch 205/55R16 fitment includes BFGoodrich, Michelin, and American Classic options in several different radial series.
Brand choice should be treated as one part of the decision rather than the whole decision. It helps to compare each tire within the correct size by sidewall style, rim-width range, load information when shown, and the overall type of tire being offered, especially when the car serves both enthusiast and occasional road-use roles.
Restoration & Appearance
Which tire should I choose for a period-style 1992 Mitsubishi Eclipse?
A period-style 1992 Mitsubishi Eclipse tire starts with using the correct primary size for the sub-model and wheel package. Base and GS models should remain in 185/70R14, while GS DOHC, GS Turbo, GST, and GSX models should stay with 205/55R16. From there, the visual character comes from the tire series and sidewall treatment available in that exact size.
For a restoration-oriented look, many owners favor a tire that complements the car’s original-era proportions rather than simply choosing any modern size that mounts. Exact originality can vary by market, package, and prior changes, so buyers who want highly accurate presentation should cross-check surviving photos, brochures, or marque-specific references before deciding on appearance details.
How does tire construction affect the appearance of a restored 1992 Mitsubishi Eclipse?
On a 1992 Mitsubishi Eclipse, the primary fitments are radial tires, so construction choice is less about bias-ply versus radial and more about how one radial design presents the car compared with another. Sidewall treatment, tread style, and the overall look of the tire series can make the same wheel package appear more understated, more sporting, or more custom.
That matters on an early-1990s restoration because the Eclipse sits at the edge of modern and collector styling trends. A blackwall radial usually keeps the look cleaner and more performance-oriented, while a wide whitewall creates a very different visual statement. Matching the tire’s appearance to the car’s trim, wheel design, and intended theme usually produces the most convincing result.
Fitment, Maintenance & Road Use
Can modifications affect tire fitment on a 1992 Mitsubishi Eclipse?
Yes. Modifications can change how a tire works on a 1992 Mitsubishi Eclipse even when the size is correct for the original sub-model. Aftermarket wheels, altered wheel widths, suspension lowering, and body or brake changes can all affect clearance, steering travel, and how well a 185/70R14 or 205/55R16 tire suits the car.
A modified Eclipse should be checked at the wheel and vehicle level, not just by the original trim chart. Looking at wheel diameter, wheel width, and visible clearance around the fenders and suspension helps prevent surprises. Cars with prior owner changes deserve an especially careful inspection before settling on a replacement tire size.
What should I inspect before driving a 1992 Mitsubishi Eclipse on new tires?
Before driving a 1992 Mitsubishi Eclipse on new tires, inspect the wheels for damage, verify that the tire size matches the sub-model and rim diameter, and check that the tires are inflated properly. It also helps to look over the suspension, alignment condition, and any obvious interference points that could affect clearance once the car is back on the road.
Older collector-era sport compacts often sit for long periods, so the inspection should go beyond the tires alone. Checking for cracked rubber components, uneven old tire wear patterns, loose steering feel, and signs of air loss creates a better baseline. A short, careful initial drive is a sensible way to confirm that everything feels settled and consistent.
How should tires on a collector 1992 Mitsubishi Eclipse be maintained?
Tires on a collector 1992 Mitsubishi Eclipse should be kept clean, properly inflated, and inspected regularly for cracking, cuts, bulges, irregular wear, and slow air loss. Even a low-mileage car needs periodic attention because age and storage conditions can affect the tire long before tread wear becomes the issue.
Storage habits matter almost as much as mileage on an enthusiast car from this era. Keeping the Eclipse away from prolonged sun, heat, moisture, and ozone sources helps preserve the tires, and moving the car occasionally can help avoid long-term flat spotting. Routine visual checks before each drive are a smart habit, especially if the car is only used seasonally.
