The 1988 Mitsubishi Cordia came from an era when compact sport coupes balanced everyday drivability with sharper styling and a more modern road feel than many earlier economy cars. By the late 1980s, that meant tire fitment was already centered on contemporary radial sizing rather than older bias-ply conventions. The 1988 Mitsubishi Cordia uses a 195/60R14 radial on a 14-inch rim, keeping the tire decision fairly straightforward across the model range. Available choices in this size lean toward a blackwall radial presentation, including the Michelin MXV3-A series. For a stock-style setup, the key is confirming the actual wheel on the car and choosing a tire that suits both appearance and intended use.
Which Tire Size Is Right for The 1988 Mitsubishi Cordia
The 1988 Mitsubishi Cordia uses one primary tire size: 195/60R14, a radial fitment for a 14-inch rim. That same size carries across the covered Cordia sub-models, so the main decision is less about multiple fitments and more about confirming the wheel on the car, then choosing the right tire within the correct size and overall style.
Fit(s): L, L w/aluminum wheels, Turbo, and Turbo w/aluminum wheels
Construction: Radial|Rim: 14 in
A 195/60R14 size uses a 195-millimeter nominal section width, a 60-series profile, radial construction, and a 14-inch rim diameter. On the 1988 Mitsubishi Cordia, that means a modern-style radial fitment consistent with the car’s late-1980s design and road manners. In this size, the available product centers on a blackwall Michelin MXV3-A radial, which gives the buyer a straightforward period-appropriate appearance rather than a vintage bias-ply look. The practical choice is to verify that the car still wears the correct 14-inch wheel setup, especially if aluminum wheels or other wheel changes are involved.
Tire fitment is straightforward across the covered 1988 Mitsubishi Cordia sub-models because they share the same primary tire size. Checking the exact sub-model still helps confirm that the car’s current wheels match the intended setup before choosing a tire.
1
1988 Mitsubishi Cordia L
The 1988 Mitsubishi Cordia L uses the same 195/60R14 radial fitment seen across the Cordia range covered here. That keeps tire selection focused on confirming the 14-inch wheel and choosing the right radial product and sidewall presentation for the car’s intended use.
The 1988 Mitsubishi Cordia L w/aluminum wheels also uses the 195/60R14 radial size. Even with the aluminum-wheel designation, the key tire decision remains choosing the correct radial in that size after confirming the wheels currently on the car.
The 1988 Mitsubishi Cordia Turbo uses the same 195/60R14 radial tire size as the other covered sub-models. That makes product selection more about maintaining the proper size and road-ready radial construction than sorting through multiple primary fitments.
The 1988 Mitsubishi Cordia Turbo w/aluminum wheels stays with the 195/60R14 radial fitment. Tire selection is therefore mainly a matter of confirming the 14-inch wheel setup and choosing a radial that matches the car’s appearance goals and driving plans.
The tire sizes listed on this page assume factory-standard vehicle configuration. The following modifications may affect tire fitment and are not reflected in this guide:
Suspension changes (lowering, lift kits, spring replacements)
Body alterations (fender modifications, custom bodywork)
If your vehicle has been modified from factory specifications, verify tire clearance before purchase.
Best 1988 Mitsubishi Cordia Tires for Sale
Available 195/60R14 choices for the 1988 Mitsubishi Cordia focus on radial construction and a traditional blackwall presentation. The current option is the Michelin MXV3-A, giving buyers a clear comparison point for size, series, and overall late-1980s appearance.
For the 1988 Mitsubishi Cordia, the most useful tire questions usually come down to the 195/60R14 size, 14-inch rim fitment, product selection, and the checks worth making before putting a collector-era car back on the road.
Tire Size & Fitment
What tire size fits a 1988 Mitsubishi Cordia?
The 1988 Mitsubishi Cordia uses a 195/60R14 radial tire. That size applies across the covered Cordia sub-models, including the L, L w/aluminum wheels, Turbo, and Turbo w/aluminum wheels, so the fitment question is more straightforward here than it is on vehicles with multiple factory tire sizes.
The next step is confirming that the car still has the correct 14-inch wheel setup, especially on a vehicle that may have seen wheel changes over the years. Once the wheel diameter is verified, tire selection becomes a matter of choosing the right radial product in 195/60R14 for the appearance, brand, and road use that best suits the car.
What size rim does a 1988 Mitsubishi Cordia use?
The primary tire fitment for the 1988 Mitsubishi Cordia is built around a 14-inch rim. The 195/60R14 size confirms that rim diameter directly, with the final number in the tire size indicating the wheel diameter the tire is designed to mount on.
Rim diameter is only one part of wheel fitment, so it is worth checking the actual wheels on the car before ordering tires, particularly if the Cordia has aftermarket wheels or replacement factory-style wheels. Matching the tire to the correct rim diameter first helps avoid mistakes, and verifying the wheel’s overall condition is just as important on an older car.
Do all 1988 Mitsubishi Cordia sub-models use the same tire size?
Yes. The covered 1988 Mitsubishi Cordia sub-models share the same 195/60R14 radial tire size. That includes the Cordia L, Cordia L w/aluminum wheels, Cordia Turbo, and Cordia Turbo w/aluminum wheels, so there is no split fitment among those versions.
That consistency makes tire buying easier, but the actual car should still be checked before choosing a tire. A Cordia that has been modified, fitted with different wheels, or sitting on older replacement rims may need wheel verification before any new tires are mounted, even though the standard fitment for these sub-models remains the same.
Choosing the Right Tire
What should I consider when choosing a 195/60R14 tire for a 1988 Mitsubishi Cordia?
Start with the correct size and construction: the 1988 Mitsubishi Cordia uses a 195/60R14 radial on a 14-inch rim. With one primary size across the covered sub-models, the main selection factors become the tire’s overall character, brand, sidewall style, and whether the car is being kept close to a stock-style road setup.
Wheel confirmation still matters, particularly on a car that may have changed hands several times. Check that the Cordia still wears the intended 14-inch wheels, then compare product details such as tire series and general appearance so the tire suits both the car’s late-1980s look and the kind of driving the vehicle is actually going to see.
What sidewall styles are available for 1988 Mitsubishi Cordia tires?
The available 195/60R14 option for the 1988 Mitsubishi Cordia uses a blackwall sidewall style. That gives the car a clean, understated appearance that fits naturally with many late-1980s compact sport coupe and touring-oriented presentations, rather than leaning toward the more decorative sidewall treatments common on earlier collector vehicles.
Sidewall style matters because it changes the visual balance of the car even when the size stays the same. A buyer focused on a stock-style presentation will usually want the sidewall treatment to feel appropriate to the period, while a road-use buyer may simply want the correct size and construction first, with appearance as a secondary decision.
What brands offer tires for the 1988 Mitsubishi Cordia?
The available tire offering for the 1988 Mitsubishi Cordia in its primary 195/60R14 size comes from Michelin. The product in this fitment is the Michelin MXV3-A, a radial tire with a blackwall presentation that aligns with the Cordia’s later-model, modern-metric tire sizing rather than an earlier vintage format.
Brand is only one part of the decision, so it still helps to look at the complete product picture. On a car like the Cordia, that means confirming the correct size, checking that the wheel setup has not changed, and choosing a tire whose overall look and road-use character make sense for how the vehicle is being maintained and driven today.
Restoration & Appearance
Which tire should I choose for a period-style 1988 Mitsubishi Cordia?
A period-style approach for a 1988 Mitsubishi Cordia starts with the correct 195/60R14 radial size on a 14-inch rim. Because this is a late-1980s fitment, the visual goal is usually a clean modern radial presentation rather than an earlier bias-ply look, and the available Michelin MXV3-A blackwall fits that general direction well.
Appearance still needs to be balanced against the actual wheel setup on the car. A Cordia that has received replacement wheels or non-stock upgrades may change the visual effect even if the tire size stays correct, so restoration-minded buyers usually benefit from checking period photos, marque references, and the car’s present stance before making the final choice.
Does correct tire fitment matter for a 1988 Mitsubishi Cordia restoration?
Yes, correct tire fitment matters because the 195/60R14 size affects both the look and the road behavior of a 1988 Mitsubishi Cordia. On a restoration-oriented car, staying with the proper size and radial construction helps preserve the balanced proportions expected of a late-1980s Mitsubishi coupe.
The tire should also suit the wheels currently on the vehicle, especially if aluminum wheels or later replacements are involved. Even a visually subtle change in size or profile can alter how the car sits and how authentic the finished presentation feels, which is why correct dimensions matter as much as brand or sidewall style.
Fitment, Maintenance & Road Use
Can modifications affect tire fitment on a 1988 Mitsubishi Cordia?
Yes, modifications can affect tire fitment on a 1988 Mitsubishi Cordia even though the primary size is a straightforward 195/60R14. Wheel changes, suspension alterations, lowering, or body modifications can all change the available space around the tire and may also alter which wheel dimensions are actually on the car.
That is why the car itself should be checked before selecting tires, especially on an older import that may have passed through several owners. Confirm the rim diameter first, then inspect wheel width, steering clearance, and fender clearance so the chosen tire matches the Cordia’s present setup rather than only its original-size reference.
What should I inspect before driving a 1988 Mitsubishi Cordia on new tires?
Before driving a 1988 Mitsubishi Cordia on new tires, inspect the wheels for damage, confirm that the 14-inch rims are in good condition, and make sure the tires are mounted in the correct 195/60R14 size. It also helps to check valve stems, wheel hardware, and overall inflation before the car goes back into regular use.
An older vehicle deserves a broader walk-around as well. Look for suspension wear, uneven ride height, brake issues, and any signs that the tires could contact the body or steering components during turns. A careful first inspection reduces the chance of chasing vibration, clearance, or handling problems after the new tires are installed.
How should 195/60R14 tires on a collector 1988 Mitsubishi Cordia be maintained?
Collector-car tire care for a 1988 Mitsubishi Cordia begins with regular pressure checks, visual inspections, and attention to age-related condition as much as tread depth. Even a radial tire that sees limited mileage can suffer from cracking, flat spotting, air loss, or general deterioration if the car spends long periods parked.
Storage habits matter on a low-use Cordia. Keeping the car away from prolonged sunlight, moisture, and ozone-producing equipment helps preserve the tires, and occasional inspection for bulges, cuts, or uneven wear can catch problems early. Before a longer drive, it is smart to recheck pressure and give the tires a fresh look rather than assuming low mileage means no risk.
