Mitsubishi Mirage Tires

Mitsubishi Mirage uses 10 tire sizes across the years listed here: 155R13, 145/80R13, 155/80R13, and 175/70R13 on 13-inch rims; 185/60R14, 195/60R14, 185/65R14, 175/65R14, and 165/65R14 on 14-inch rims; and 175/55R15 on 15-inch rims. Early Mirage years from 1985 into the 1990s can overlap between 13-inch and 14-inch packages, while later Mirage models from 2017 onward can overlap between 14-inch and 15-inch packages.

That means the correct answer for a Mitsubishi Mirage is tied to the exact model year and wheel package, not simply the nameplate. Use the year listing as a starting point, then verify the sidewall marking already on the car and confirm the wheel diameter before choosing a replacement.

155R13 is an older Euro-metric radial size used on certain 1985 and 1986 Mitsubishi Mirage applications. The 155 indicates section width in millimeters, the R identifies radial construction, and the 13 is the wheel diameter in inches. In period practice, a size written this way usually corresponds to an 80-series profile even though the aspect ratio is not shown in the basic size code.

That older notation can look incomplete next to later sizes such as 145/80R13 or 175/70R13, but it is still a specific fitment and should not be treated as interchangeable by name alone. If your Mitsubishi Mirage currently wears 155R13 or 155HR13 on the sidewall, match that size first and then confirm wheel width if needed.

1994 Mitsubishi Mirage appears with four listed sizes because that model year spans more than one wheel and tire package. The sizes are 145/80R13, 155/80R13, 175/70R13, and 185/65R14, which means both 13-inch and 14-inch rim diameters were used within the same model year.

A 1994 Mitsubishi Mirage owner should identify the wheel diameter first and then match the exact sidewall size already fitted to the car. When several sizes share the same year, year alone is not enough; trim level, wheel package, and what is physically on the vehicle all matter.

Mitsubishi Mirage uses three rim diameters across the years covered here: 13-inch, 14-inch, and 15-inch. The earlier production range overlaps heavily between 13-inch and 14-inch wheels, while the later range from 2017 to 2024 overlaps between 14-inch and 15-inch wheels. Each tire size is tied to one of those rim diameters, so the wheel diameter is a non-negotiable part of fitment.

The practical step is simple: read the wheel or tire sidewall on the car before choosing a replacement. If your Mitsubishi Mirage has 13-inch wheels, none of the 14-inch or 15-inch sizes will substitute correctly, and the same is true when comparing 14-inch and 15-inch later-model packages.

1989 Mitsubishi Mirage can use 155/80R13, 175/70R13, or 195/60R14 depending on the wheel and trim configuration. That means a single model year can point to either a 13-inch or 14-inch rim, with different section widths and sidewall proportions even within the same diameter family.

Start with the sidewall marking on the tires currently fitted to your 1989 Mitsubishi Mirage, then confirm that the wheel diameter matches the last number in the size code. If the car is newly acquired or has had wheel changes over the years, comparing the actual wheel size is more reliable than relying on year alone.

Available Mitsubishi Mirage tire products in these sizes include blackwall, narrow whitewall, and wide whitewall sidewall styles. Blackwall appears on the sport and modern radial offerings, while the 155/80R13 options include both narrow and wide whitewall alternatives for owners seeking a more period-flavored look.

Choosing sidewall style is partly a fitment question and partly a presentation question. A later daily-driven Mitsubishi Mirage will usually look most natural on blackwalls, while an earlier car built with a custom, lowrider, or nostalgic visual theme may suit one of the whitewall radial options better.

The available Mitsubishi Mirage tire products here come from Michelin, Dunlop, Travelstar, BFGoodrich, Maxxis, Tornel, and Avon. Those brands cover a mix of blackwall sport radials, classic-style whitewall radials, and period-appropriate replacement options for select earlier Mirage sizes.

Brand choice should come after size and wheel diameter are settled. Once the correct size is confirmed for your Mitsubishi Mirage, you can compare brands by sidewall style, intended use, and the character you want the car to present rather than trying to force a preferred brand into the wrong fitment.

Mitsubishi Mirage products here span several series, including Michelin XAS-FF, SP Sport Aquajet, Michelin Pilot Exalto PE2, UN106, Silvertown Radial, Classic Whitewall MA-1, Tornel Classic, CR6ZZ, and Michelin MXV3-A. They differ mainly in intended character: some are blackwall performance or touring radials, while others are classic-style whitewall radials aimed at owners who want a more vintage visual presentation in a modern radial construction.

That distinction matters most on the earlier 13-inch Mirage fitments, where appearance can vary as much as the brand itself. If your Mitsubishi Mirage is being preserved in stock visual form or personalized with a period-inspired look, compare the series for sidewall style and overall stance after you have confirmed the exact size.

A Mitsubishi Mirage stored on its tires should be kept in a cool, dry, dark space away from direct sunlight, electric motors, welders, and ozone-producing equipment. Tires last better when they are clean, properly inflated, and not left supporting the full vehicle weight in one position for extended periods without movement.

For a collector or low-use Mitsubishi Mirage, move the car periodically or use tire cradles if it will sit for long intervals. Keeping the tires off hot concrete, out of standing moisture, and away from petroleum contamination will do more for long-term condition than simply covering the car.

Tires on a Mitsubishi Mirage should be inspected regularly even if the car sees very low mileage. Check for pressure loss, weather checking, irregular wear, sidewall cuts, age-related hardening, and any mismatch between the tire size fitted and the wheel diameter actually on the car.

A good routine is to inspect the tires every time the Mitsubishi Mirage is driven and to perform a more careful look at least seasonally during storage periods. Cars that sit often age their tires by time and environment rather than tread wear, so visual condition matters as much as mileage.

Mitsubishi Mirage tires should be replaced when they show cracking, flat spotting that does not recover, impact damage, sidewall bulges, persistent vibration, or age-related hardening, even if tread depth still looks acceptable. Collector and occasional-use cars can retain tread for years while the rubber itself becomes less trustworthy.

The right approach is to judge a Mitsubishi Mirage tire by condition, age, and use pattern rather than tread alone. If the car has been stored for long periods or has an uncertain tire history, a careful professional inspection is prudent before the next road outing.

Original-type Mitsubishi Mirage fitment in this year span was not limited to one single tire size or one single tire line. The listed sizes vary widely by year, from 13-inch radial fitments such as 155R13 and 145/80R13 to later 14-inch and 15-inch sizes, which reflects how many different Mirage configurations were sold over time.

For a restoration-minded Mitsubishi Mirage owner, the most authentic choice begins with the exact year, wheel diameter, and sidewall size appropriate to the specific car. If the goal is concours-level accuracy, compare the car against factory literature, survivor examples, or marque-community references before selecting cosmetic details such as sidewall style.

Correct tire fitment can affect how a Mitsubishi Mirage is judged, presented, and valued, especially when the car is restored to factory-style appearance or preserved as a clean survivor. Size, overall stance, wheel diameter, and sidewall style all influence whether the car looks period-appropriate for its specific year and trim.

That does not mean every Mitsubishi Mirage must wear the same style tire, but it does mean the tire should match the car's intended purpose. A stock restoration usually benefits from the proper wheel diameter and a sidewall style that suits the era, while a custom build may deliberately choose a different visual treatment.

Mitsubishi Mirage tire options here include blackwall, narrow whitewall, and wide whitewall styles. Blackwall is the most natural visual match for many Mirage applications, especially the sport and late-model fitments, while the available whitewall 155/80R13 options suit owners pursuing a customized period look rather than a strict factory-style presentation.

For a restoration, sidewall style should follow the character of the specific Mitsubishi Mirage rather than a one-style-fits-all rule. If authenticity is the goal, settle the correct size and wheel diameter first, then choose the sidewall treatment that best aligns with the era and appearance of the car you are restoring.

These Mitsubishi Mirage tires are modern radial constructions in the sizes offered here, which makes them suitable for normal road use when they are the correct size for the car, properly mounted on the correct wheel diameter, and maintained in sound condition. Safety begins with matching the exact size to the wheel and keeping inflation and condition under control.

A Mitsubishi Mirage that is driven regularly should have its tires evaluated as part of normal roadworthiness, not just appearance. If the car has been stored, recently purchased, or fitted with wheels of uncertain origin, inspect the tires and wheel sizes carefully before treating it as ready for everyday use.

Before driving a Mitsubishi Mirage, check tire pressure, sidewall condition, tread wear pattern, visible age cracking, and the match between the tire size and the wheel diameter. On years with multiple listed sizes, confirm that the car is actually wearing the size intended for that wheel package rather than a close-looking substitute.

That check is especially important on Mirage models that overlap between 13-inch and 14-inch wheels in the earlier years and between 14-inch and 15-inch wheels in the later years. A quick sidewall inspection and wheel-diameter confirmation can prevent chasing ride, handling, or clearance issues caused by the wrong fitment.

Appropriate speed for a Mitsubishi Mirage depends on the actual tire fitted, its size, service description, age, and condition rather than the model name alone. The products listed here are radial designs, and several include modern speed-rated constructions, but a tire that is old, damaged, underinflated, or mismatched to the wheel should never be treated as capable simply because the size looks correct.

For real-world use, drive a Mitsubishi Mirage at speeds that are appropriate to the condition of the tires and the mechanical state of the car as a whole. If the tires have uncertain age or storage history, conservative driving and inspection come first, especially on a newly acquired or long-stored example.