Infiniti Q60 Tires

Infiniti Q60 fitments in this range include 225/45R19 and 225/50R18 for 2014-2015; 245/40R19 for 2014-2015 and 2017; 245/45R18 for 2014-2015; 255/40R19 for 2017-2022; 265/35R19 for 2017; and 255/35R20 plus 275/30R20 for 2018-2022. The associated wheel diameters are built into the size codes: 18-inch for the 225/50R18 and 245/45R18 sizes, 19-inch for the 225/45R19, 245/40R19, 255/40R19, and 265/35R19 sizes, and 20-inch for the 255/35R20 and 275/30R20 sizes.

The practical point is that Infiniti Q60 fitment is not one-size-fits-all by model name alone. Start with the car's year, then confirm the wheel diameter and whether the car uses the same size at all four corners or a staggered arrangement with different front and rear tires.

The 2017 Infiniti Q60 has three listed sizes because that model year includes more than one configuration on 19-inch wheels. The sizes are 245/40R19, 255/40R19, and 265/35R19, which points to different wheel-and-tire combinations rather than a single universal fitment for every 2017 car.

That means a 2017 Infiniti Q60 owner should identify the exact front and rear sizes already on the car before replacing tires. A staggered setup will use different widths between the front and rear, while another 2017 Q60 may carry a different 19-inch package entirely.

Infiniti Q60 uses three wheel diameters across these years: 18-inch, 19-inch, and 20-inch. The 2014-2015 range includes both 18-inch and 19-inch fitments, 2017 uses 19-inch fitments, and 2018-2022 includes both 19-inch and 20-inch fitments depending on configuration.

Wheel diameter is the first detail to verify because the tire sizes are tied directly to it. An 18-inch tire will not fit a 19-inch wheel, and a 19-inch tire will not fit a 20-inch wheel, even when the model year and body style appear otherwise similar.

On an Infiniti Q60, 255/35R20 means the tire is 255 millimeters wide, has a 35-series aspect ratio, uses radial construction, and fits a 20-inch wheel. That same metric-radial logic applies across the Q60 sizes listed here, with the final number always identifying the wheel diameter in inches.

Knowing how to read the code helps when comparing later Q60 20-inch fitments such as 255/35R20 and 275/30R20. The width and aspect ratio differ even though both mount on 20-inch wheels, so the front and rear positions in a staggered setup should be matched carefully.

A 2014 Infiniti Q60 can use 225/45R19, 225/50R18, 245/40R19, or 245/45R18 depending on its wheel and tire package. That means year alone is not enough, because both 18-inch and 19-inch fitments appear and there are also narrower and wider pairings within those wheel diameters.

Check the existing tire sidewalls on the car, then compare front and rear sizes to see whether the car uses a square or staggered setup. If the car is under restoration or has changed wheels during its life, verify the actual wheel diameter before replacing anything.

Infiniti Q60 tires in these listings are available primarily in blackwall, with selected 255/40R19 and 255/35R20 offerings also available in RWL and redline. Those alternate sidewall treatments appear within the Pro-Trac Street Pro III series, while the BFGoodrich and Nitto offerings listed here are blackwall tires.

For a late-model performance coupe such as the Infiniti Q60, blackwall is the most familiar visual choice, while RWL and redline provide a custom look. If appearance matters as much as fitment, decide on sidewall style only after confirming the correct size and wheel diameter.

The brands listed for Infiniti Q60 sizes here are BFGoodrich, Nitto, and Pro-Trac. BFGoodrich covers the broadest range of sizes, Nitto appears in several 18-, 19-, and 20-inch performance sizes, and Pro-Trac is offered in selected 255-width 19-inch and 20-inch applications.

Brand choice can narrow quickly once you identify the exact size on the car, especially if you also want a certain sidewall style. After size and wheel diameter are confirmed, compare the available brands within that one fitment rather than across the whole Q60 range.

Infiniti Q60 tire series here include BFGoodrich g-Force Comp 2 AS, BFGoodrich g-Force Sport Comp 2, BFGoodrich g-Force Phenom T/A, Nitto NT555 G2, and Pro-Trac Street Pro III. All are radial designs, but they differ by tread family, styling emphasis, and in some sizes by sidewall treatment, with Street Pro III adding RWL and redline options where offered.

The useful way to compare series is within the exact size your Infiniti Q60 needs. Once the correct wheel diameter and front-rear arrangement are settled, you can choose between the available series based on whether you want a more understated blackwall look or a more custom visual presentation.

An Infiniti Q60 stored on its tires should be kept in a cool, dry, dark environment away from direct sunlight, ozone sources, and large temperature swings. Proper inflation matters during storage, because underinflation can encourage flat spotting and over long periods can stress the casing unevenly.

If the car sits for extended intervals, move it occasionally or support it in a way that reduces constant load on one contact patch. A clean storage surface and regular pressure checks go a long way toward preserving the tires on a low-mileage enthusiast coupe.

Tires on an Infiniti Q60 should be inspected regularly even if the car is driven only occasionally. Look for pressure loss, shoulder wear, cracking, punctures, and any mismatch between front and rear sizes, especially on cars with staggered fitments where rotation patterns are more limited.

A good routine is to inspect before any meaningful drive and again after the car has been parked for a long period. Low-use performance cars often age out their tires before they wear them out, so visual checks are just as important as tread-depth checks.

Tires on an Infiniti Q60 should be replaced when age, cracking, hardening, impact damage, or uneven wear begins to compromise the casing, even if the tread still looks serviceable. Performance-oriented low-profile tires can appear acceptable at a glance while still aging out from time and heat cycles.

That matters on a Q60 because many examples are driven seasonally or only on weekends. If the car feels less stable, has visible weathering, or carries tires of noticeably different age from front to rear, replacement should be considered before the next regular road outing.

Infiniti Q60 used multiple tire sizes across its production run rather than one universal original fitment. Early years include 18-inch and 19-inch options, 2017 centers on 19-inch fitments, and 2018-2022 adds 20-inch sizes alongside 19-inch applications, so originality depends on the specific year and configuration.

For an authenticity-minded owner, the right approach is to match the exact wheel-and-tire package associated with the car's build rather than choosing a size from the broader Q60 range. Factory paperwork, original window-sticker information, and marque-specific references are the best guides for that final confirmation.

Correct tire fitment can affect how an Infiniti Q60 is viewed, especially when the car is being preserved in an original or highly accurate presentation. Wheel diameter, front-to-rear size relationship, and sidewall appearance all influence whether the car looks properly configured for its year and trim level.

That does not mean every owner must avoid alternate styles, but it does mean changes should be intentional. If the goal is originality or event judging, match the car's proper size combination first, then choose among the available series and sidewall styles within that fitment.

Blackwall is the most broadly available sidewall style for Infiniti Q60 tires in these listings, while selected 255/40R19 and 255/35R20 sizes are also offered in RWL and redline. Because the Q60 is a modern performance coupe, blackwall presents the most factory-like look among the options shown here.

If the restoration goal is visual originality, blackwall is usually the safer direction. RWL or redline can suit a personalized build, but they change the appearance noticeably, so they make the most sense when the car is being styled rather than preserved in a stock presentation.

These Infiniti Q60 tires are modern radial performance tires intended for public-road use when they are the correct size for the car, properly mounted on the correct wheel diameter, and in sound condition. The listed fitments cover 18-inch, 19-inch, and 20-inch applications, so safety begins with matching the exact tire to the wheel and axle position.

A Q60 with mismatched diameters or incorrect stagger can compromise handling, braking feel, and electronic system behavior. Before regular driving, make sure the tires are correctly sized, evenly inflated, free of damage, and appropriate as a matched set for the way the car is configured.

Before driving an Infiniti Q60, check cold inflation pressure, visible condition, tread wear pattern, and the exact size fitted at each corner. That is especially important on years that can carry staggered fitments, because a wider rear size and a narrower front size may both be correct on the same car.

Also confirm that all four tires match the intended wheel diameters on the car and that no replacement has introduced an incorrect profile. A few minutes of inspection can prevent handling problems that come from mixing the right model name with the wrong size combination.

An Infiniti Q60 should always be driven at speeds appropriate to the condition, age, inflation, and exact specification of the tires actually fitted to the car. Several listed Q60 products carry modern performance service descriptions, but safe speed in real use still depends on the complete condition of the tire and the vehicle.

For a road car that sees occasional use, the sensible approach is to treat tire condition as the governing factor rather than assuming capability from the model alone. If the tires are aged, unevenly worn, or of mixed type front to rear, reduce use until the setup has been corrected.