Dodge Trucks Hornet Tires

Dodge Trucks Hornet uses three tire sizes across the 2023, 2024, and 2025 model years: 215/60R17, 225/55R18, and 235/40R20. Those sizes correspond to 17-inch, 18-inch, and 20-inch rim diameters respectively, and all three appear throughout the full year span rather than belonging to separate early and late production phases.

The practical takeaway is that model year alone does not identify the correct tire for a Dodge Trucks Hornet. You need to confirm which wheel package is actually on the vehicle by checking the tire sidewall, the wheel itself, or the vehicle information label, then match the replacement tire to that exact size and rim diameter.

A 2023 Dodge Trucks Hornet can have three sizes listed because the model was offered with different wheel packages in the same model year. The split is a rim-diameter split, with fitments covering 17-inch, 18-inch, and 20-inch wheels rather than a single universal setup for every Hornet built that year.

That means the right tire for a 2023 Dodge Trucks Hornet depends on the exact configuration sitting in your garage, not just the badge and year on the title. If the vehicle has been fitted with a different wheel set than it originally carried, the installed wheel diameter is the number that matters when selecting the tire.

Dodge Trucks Hornet uses three rim diameters in the listed years: 17 inches, 18 inches, and 20 inches. The matching tire sizes are 215/60R17 for 17-inch wheels, 225/55R18 for 18-inch wheels, and 235/40R20 for 20-inch wheels, with all three appearing in 2023 through 2025.

Because those diameters overlap by year, the quickest way to avoid a fitment mistake is to verify the wheel size on the actual Dodge Trucks Hornet before comparing tires. Even if two sizes look close in overall proportions, a tire built for one rim diameter cannot be mounted on a different wheel diameter.

On a Dodge Trucks Hornet, 215/60R17 is a metric radial size code. The 215 is the nominal section width in millimeters, the 60 is the aspect ratio showing sidewall height as 60 percent of section width, the R indicates radial construction, and the 17 is the wheel diameter in inches.

Reading the code that way helps you avoid substituting a tire that fits the wheel but changes the intended profile too far. On a Dodge Trucks Hornet, the full size code matters as a package, so width, aspect ratio, construction, and rim diameter should all match the original installed specification unless a knowledgeable specialist has planned a complete wheel-and-tire change.

A 2024 Dodge Trucks Hornet can use 215/60R17, 225/55R18, or 235/40R20, so the correct size is the one that matches the wheel package installed on that specific vehicle. The year alone is not enough because all three sizes appear in the same model year.

Start by checking the existing tire sidewall and confirming that it matches the wheel diameter actually fitted to the Dodge Trucks Hornet. If the vehicle has aftermarket wheels or a previous owner changed the package, verify the current setup first and use the year listing as a guide to narrow the correct replacement size.

No product brands are listed here for Dodge Trucks Hornet, so this page functions primarily as a fitment and size guide rather than a brand comparison. The key fitment facts are the three sizes used from 2023 through 2025 and their corresponding 17-inch, 18-inch, and 20-inch wheel diameters.

That makes brand selection a second step after size confirmation. Once you have verified whether the Dodge Trucks Hornet carries 215/60R17, 225/55R18, or 235/40R20, you can compare available tires within that exact size rather than searching broadly across Hornet applications that may not match your wheel package.

Dodge Trucks Hornet tires are only interchangeable between 2023 and 2025 when the vehicles use the same size and wheel diameter. The size set stays consistent across those years, but it still includes three separate fitments: 215/60R17, 225/55R18, and 235/40R20.

In practice, that means a tire from one Dodge Trucks Hornet may fit another if both vehicles share the same wheel package, but not simply because they are both Hornets from the same generation. Treat the installed wheel diameter and complete size code as the deciding factors before moving a tire or planning a replacement set.

A Dodge Trucks Hornet should be stored on a clean, dry surface away from direct sunlight, ozone sources, and large temperature swings. Proper inflation matters during storage, because an underinflated modern radial can develop flat spotting more easily when a vehicle sits for extended periods.

If the Dodge Trucks Hornet will be parked for a long season, move it occasionally or use storage methods that reduce prolonged load on one contact patch. Keeping the tires clean and the inflation pressures checked at intervals helps preserve ride quality and reduces the chance of vibration when the vehicle goes back into regular use.

Tires on a Dodge Trucks Hornet should be inspected regularly even if the vehicle is driven only modest mileage. Look for uneven wear, impact damage, punctures, sidewall cracking, and any signs that one axle is not wearing at the same rate as the other.

A good routine is to inspect the Dodge Trucks Hornet tires visually every month and more carefully before longer drives. Consistent inspections can also reveal whether the vehicle is due for alignment, pressure correction, or suspension review, all of which can shorten tire life long before the tread is actually worn out.

Tires on a Dodge Trucks Hornet should be replaced when age, cracking, impact damage, or structural deterioration becomes a concern, even if the tread still appears usable. Collector-minded owners sometimes focus on remaining tread depth, but age and condition can matter just as much on a low-mileage vehicle.

The practical approach is to have older Dodge Trucks Hornet tires evaluated periodically and not assume that good cosmetic appearance means continued safe service. If the vehicle has sat for long periods, has visible sidewall aging, or shows vibration that cannot be traced to balance alone, replacement deserves serious consideration.

A correctly sized, properly installed tire in the appropriate condition is suitable for normal public-road use on a Dodge Trucks Hornet. The main safety issue here is not an antique construction question, but selecting the exact size that matches the installed 17-inch, 18-inch, or 20-inch wheel and maintaining it in sound condition.

Safe road use starts with verifying the full size code on the Dodge Trucks Hornet, then checking inflation, tread condition, and any signs of impact damage or abnormal wear. If the vehicle has recently had a wheel change or suspension work, a careful post-installation inspection is worthwhile before resuming regular driving.

Before driving a Dodge Trucks Hornet, check tire pressure, visible tread and sidewall condition, and confirm that all four tires are the correct size for the wheel package. Also look for cuts, bulges, embedded objects, or uneven wear patterns that can point to alignment or suspension problems.

That pre-drive walkaround matters even more if the Dodge Trucks Hornet has been parked for a while or recently had wheels removed. A quick inspection can catch a low tire, a damaged sidewall, or a mismatched replacement before it turns into poor handling, vibration, or a roadside problem.

A Dodge Trucks Hornet should be driven at speeds appropriate to the condition, rating, and inflation of the tires actually fitted to the vehicle. Since the Hornet uses modern metric radial sizes rather than antique bias-ply fitments, the key variables are the exact tire specification and the tire's present condition rather than the age of the vehicle design itself.

The prudent approach is to avoid assuming that every tire in a given Dodge Trucks Hornet size has the same capability. Match driving speed to the installed tire's rating and condition, and reduce speed immediately if the vehicle shows vibration, wandering, or any sign that the tires are not performing normally.