BMW 440i xDrive Gran Coupe Tires
BMW 440i xDrive Gran Coupe models from 2017 through 2020 sit in the modern grand-touring side of the 4 Series family, combining four-door practicality with the sharper stance and performance character buyers expect from a turbocharged BMW. That matters when choosing tires, because the BMW 440i xDrive Gran Coupe uses multiple size combinations across the same production run rather than a single universal fitment. The key difference here is wheel diameter, with both 18-inch and 19-inch setups appearing throughout every model year. Before selecting a tire, confirm whether the car is equipped with the 18-inch or 19-inch wheel package and match the front and rear sizes accordingly.
BMW 440i xDrive Gran Coupe Tire Size Guide
BMW 440i xDrive Gran Coupe production used 4 distinct tire sizes from 2017 through 2020, and the most important fitment split is wheel diameter rather than model year because both 18-inch and 19-inch setups appear across the entire run. All four sizes use modern metric radial sizing, so the first number is section width in millimeters, the second is aspect ratio, and the final number is rim diameter in inches.
225/40R19 is a front-position size used on BMW 440i xDrive Gran Coupe models from 2017 through 2020 when equipped with the 19-inch wheel setup. The 225 identifies a 225mm section width, 40 is the aspect ratio, R means radial construction, and 19 is the required rim diameter in inches. Choose this size when the car carries the 19-inch front wheel package, and match it with the corresponding rear size rather than using it as a four-corner substitute.
225/45R18 is a front-position size used on BMW 440i xDrive Gran Coupe models from 2017 through 2020 with the 18-inch wheel setup. The 225 identifies a 225mm section width, 45 is the aspect ratio, R means radial construction, and 18 is the required rim diameter in inches. Choose this size when the car carries the 18-inch front wheel package, and keep it paired with the correct 18-inch rear size for the intended staggered setup.
255/35R19 is a rear-position size used on BMW 440i xDrive Gran Coupe models from 2017 through 2020 when fitted with 19-inch wheels. The 255 identifies a 255mm section width, 35 is the aspect ratio, R means radial construction, and 19 is the required rim diameter in inches. Choose this size for the rear axle on 19-inch staggered setups, and verify that the front tires are the matching 225/40R19 size.
255/40R18 is a rear-position size used on BMW 440i xDrive Gran Coupe models from 2017 through 2020 with the 18-inch wheel package. The 255 identifies a 255mm section width, 40 is the aspect ratio, R means radial construction, and 18 is the required rim diameter in inches. Choose this size for the rear axle on 18-inch staggered setups, and confirm that the front tires are the matching 225/45R18 size.
Every 2017 through 2020 BMW 440i xDrive Gran Coupe year lists four sizes, so identify the specific wheel package before selecting a tire.
BMW 440i xDrive Gran Coupe Tires by Year
The year listing shows which tire sizes apply to each BMW 440i xDrive Gran Coupe model year and helps separate the 18-inch setup from the 19-inch setup. In 2017, 2018, 2019, and 2020, more than two sizes are listed because the model uses staggered front and rear sizing across two different wheel diameters. Match the sizes by wheel package first, then confirm the front and rear positions on the car.
2017 BMW 440i xDrive Gran Coupe
- 225/40R19
- 225/45R18
- 255/35R19
- 255/40R18
2018 BMW 440i xDrive Gran Coupe
- 225/40R19
- 225/45R18
- 255/35R19
- 255/40R18
2019 BMW 440i xDrive Gran Coupe
- 225/40R19
- 225/45R18
- 255/35R19
- 255/40R18
2020 BMW 440i xDrive Gran Coupe
- 225/40R19
- 225/45R18
- 255/35R19
- 255/40R18
Best BMW 440i xDrive Gran Coupe Tires for Sale
Available BMW 440i xDrive Gran Coupe tires span 2 brands and 12 products across 225/40R19, 225/45R18, 255/35R19, and 255/40R18. Confirm the car's 18-inch or 19-inch wheel package and the correct front-to-rear size pairing before selecting.
225/40R19 Products
These are the available products for 225/40R19.
225/45R18 Products
These are the available products for 225/45R18.
255/35R19 Products
These are the available products for 255/35R19.
255/40R18 Products
These are the available products for 255/40R18.
Frequently Asked Questions
The FAQ below focuses on the BMW 440i xDrive Gran Coupe's staggered fitment, the difference between its 18-inch and 19-inch wheel packages, and how to sort through the available radial tire brands and series for each size.
Size Basics & Fitment
BMW 440i xDrive Gran Coupe models from 2017 through 2020 use four tire sizes: 225/45R18 and 255/40R18 for the 18-inch setup, plus 225/40R19 and 255/35R19 for the 19-inch setup. The 225-width sizes are the front sizes, while the 255-width sizes are the rear sizes. All listed options are radial tires sized for either 18-inch or 19-inch wheels.
That means BMW 440i xDrive Gran Coupe fitment is not a single-size situation even within the same model year. Start by checking the wheel diameter on the car, then confirm whether the front and rear tires follow the correct staggered pairing. Using an 18-inch front size with a 19-inch rear size, or mixing one wheel package with the other, is the first mistake to avoid.
A 2018 BMW 440i xDrive Gran Coupe shows four listed sizes because the model was offered with two staggered wheel packages rather than one square setup. One package uses 18-inch wheels with 225/45R18 front and 255/40R18 rear tires, while the other uses 19-inch wheels with 225/40R19 front and 255/35R19 rear tires. The split is driven by wheel diameter and front-to-rear sizing, not by a midyear production change.
The practical takeaway is that year alone does not identify the right tire. Check the actual wheels on the car and note both axle positions before choosing a replacement. If the car has been changed from its original wheel package, the installed wheel diameter and the current front and rear sizes matter more than the model year.
BMW 440i xDrive Gran Coupe models in this range use either 18-inch or 19-inch rim diameters. The 18-inch setup pairs 225/45R18 fronts with 255/40R18 rears, and the 19-inch setup pairs 225/40R19 fronts with 255/35R19 rears. Both wheel diameters appear across all model years from 2017 through 2020.
That makes rim diameter the first fitment check, because the year does not narrow the choice by itself. Read the current tire size on the car, verify the wheel diameter stamped on the wheel if needed, and keep front and rear sizes within the same diameter family. Once that is confirmed, the remaining decisions are brand, series, and intended driving use.
On a BMW 440i xDrive Gran Coupe, 225/45R18 means the tire is 225 millimeters wide, has a 45 percent aspect ratio, uses radial construction, and fits an 18-inch rim. That size appears as the front tire on the 18-inch wheel package used from 2017 through 2020. It is one half of a staggered combination, not a universal all-around size for every wheel setup.
Reading the size this way helps you avoid ordering by width alone. A 225-width tire can still be wrong if the aspect ratio or rim diameter differs, and the BMW 440i xDrive Gran Coupe also uses a 225/40R19 front size on another wheel package. Matching every part of the code is what keeps the replacement aligned with the car's installed wheels.
Buying the Right Tire
A 2019 BMW 440i xDrive Gran Coupe can use either the 18-inch staggered set or the 19-inch staggered set, so the correct tire size depends on the wheels currently installed. The 18-inch combination is 225/45R18 front and 255/40R18 rear, while the 19-inch combination is 225/40R19 front and 255/35R19 rear. All four sizes were used during the 2019 model year.
Begin at the car itself rather than relying on the year alone. Check the size molded into the sidewall at each axle, verify the wheel diameter, and make sure the front and rear pairing stays within the same package. That approach is especially important on cars that may have had wheel changes, seasonal sets, or previous replacement work.
BMW 440i xDrive Gran Coupe tires in the available range are offered in Blackwall sidewall style across all four sizes. That applies to the 18-inch front and rear sizes as well as the 19-inch front and rear sizes. No alternate whitewall or specialty sidewall treatment appears in the current selection.
For a modern BMW performance-oriented grand coupe, Blackwall presentation is the appropriate visual match and keeps the look consistent with the car's factory-era character. Once the correct wheel diameter and axle position are confirmed, sidewall appearance is straightforward here. The real decision points are size pairing, brand selection, and the tread series that suits how the car is driven.
BMW 440i xDrive Gran Coupe tires in these sizes are available from BFGoodrich and Nitto. BFGoodrich appears across all four listed sizes, while Nitto is present in 225/45R18. The available series include BFGoodrich g-Force Comp 2 AS, g-Force Sport Comp 2, g-Force Phenom T/A, and Nitto NT555 G2.
That gives BMW 440i xDrive Gran Coupe owners a mix of choices within the same basic size structure rather than a single brand path. After confirming the wheel package and axle position, compare the available series within that exact size. The best comparison is always within the correct size first, because brand selection comes after fitment is locked down.
BMW 440i xDrive Gran Coupe tires are offered in several radial series, including BFGoodrich g-Force Comp 2 AS, BFGoodrich g-Force Sport Comp 2, BFGoodrich g-Force Phenom T/A, and Nitto NT555 G2. These are all modern radial offerings, but they represent different performance lines within the available size range. Some series appear in all four sizes, while others are limited to selected fitments.
For a BMW 440i xDrive Gran Coupe owner, the useful way to compare them is within the exact front or rear size the car requires. Once wheel diameter and axle position are established, look at which series are available in that size and consider the kind of driving the car sees. That keeps the decision practical instead of comparing series that may not overlap in fitment.
Maintenance & Longevity
A BMW 440i xDrive Gran Coupe stored on its tires should be kept in a cool, dry, dark space away from direct sunlight, ozone sources, and large temperature swings. Clean tires and wheels before storage, and maintain inflation appropriate to the tire being used. If the car will sit for an extended period, moving it slightly from time to time can help reduce flat-spotting.
Because BMW 440i xDrive Gran Coupe models use staggered sizing, it is also worth labeling wheel positions if the tires are removed for seasonal or service work. Front and rear sizes are not interchangeable in the listed combinations. Good storage habits preserve ride quality and help prevent age-related deterioration on a car that may see less use than a daily driver.
Tires on a BMW 440i xDrive Gran Coupe should be inspected regularly for pressure, uneven wear, sidewall damage, punctures, and any signs of aging. A quick visual check before driving and a more thorough inspection at routine service intervals is a sensible pattern for a performance-oriented car on staggered tires. Pressure consistency matters because front and rear sizes differ and should not be judged as if they were a square setup.
Regular inspection is especially important if the car is driven seasonally or sits for stretches between outings. Catching wear early helps identify alignment or suspension issues before they shorten the life of an expensive staggered set. It also confirms that both axles still carry the correct size family for the 18-inch or 19-inch wheel package installed.
BMW 440i xDrive Gran Coupe tires should be replaced when they show cracking, bulges, impact damage, persistent vibration, irregular wear, or age-related hardening even if tread depth still looks acceptable. Collector habits are less relevant here than on older classics, but time still affects rubber compounds. A tire can look usable at a glance and still be past its best service life.
For a BMW 440i xDrive Gran Coupe, age and condition matter just as much as tread because the car's performance can expose weakness quickly. If there is any doubt about age, previous storage, or sidewall condition, have the tires evaluated during service rather than waiting for visible failure. Replacing tired rubber in matched front and rear sizes also helps preserve the intended balance of the staggered setup.
Safety & Road Use
The available BMW 440i xDrive Gran Coupe tires are modern radial road tires in the sizes used on 2017 through 2020 cars, so they are suited to normal public-road use when the correct size is matched to the installed wheel package. Safety begins with using the proper 18-inch or 19-inch front and rear combination and maintaining the tires in sound condition. Size accuracy matters as much as brand choice.
A BMW 440i xDrive Gran Coupe will only feel right when both axles carry the correct staggered pairing, inflation is kept where it should be, and the tires are free of damage or age issues. Before any regular road use, inspect the sidewalls, tread surfaces, and overall wear pattern. If the car was recently acquired, verify the installed sizes rather than assuming the previous setup was correct.
Before driving a BMW 440i xDrive Gran Coupe, check tire pressure, visible tread and sidewall condition, and confirm that the front and rear tires match the proper staggered size set for the wheel diameter on the car. The key combinations are 225/45R18 with 255/40R18 or 225/40R19 with 255/35R19. Also look for any signs of rubbing, puncture repair issues, or uneven wear.
Those checks matter because a BMW 440i xDrive Gran Coupe can appear properly fitted at a glance while still carrying a mismatched front-to-rear combination or the wrong diameter family. A short inspection before driving is far easier than correcting wear or handling problems later. On a car with all-wheel drive, maintaining the intended size relationship across the set is especially important.
A BMW 440i xDrive Gran Coupe should always be driven within the capability of the specific tires fitted to it, not according to the car's potential alone. The available tires in these sizes are modern ZR-designated radial performance tires, but real-world speed suitability still depends on tire condition, inflation, load, alignment, and the road environment. A fresh, properly maintained set is very different from an aged or neglected one.
For practical road use, the smartest approach is to treat tire condition as the limiting factor and avoid using old, damaged, or unevenly worn tires at sustained high speed. Confirm that the tires are the correct staggered sizes, properly inflated, and in healthy condition before expecting the BMW 440i xDrive Gran Coupe to behave as intended. Good judgment matters more than the letter code alone.