Audi RS3 Tires

Audi RS3 uses four sizes across the years shown here, arranged in two staggered front-and-rear pairings. The 2017-2020 Audi RS3 uses 235/35R19 and 255/30R19, while the 2022-2026 Audi RS3 uses 245/35R19 and 265/30R19. Every listed size is a radial built for a 19-inch rim.

The practical point is that Audi RS3 does not use one universal size across all years in this group. Start by identifying the model year, then confirm which size is mounted at each axle before replacing anything, especially if you are changing only two tires rather than all four.

On an Audi RS3, 235/35R19 is a metric radial size. The 235 is the nominal section width in millimeters, 35 is the aspect ratio, R means radial construction, and 19 is the wheel diameter in inches. That size appears in the 2017-2020 Audi RS3 fitment group.

Knowing how to read the code helps you avoid replacing a tire with one that looks similar but changes width or sidewall height. On a staggered Audi RS3 setup, even a small change can upset the intended front-to-rear pairing, so the full size code matters rather than just the wheel diameter.

On an Audi RS3, 265/30R19 is also a metric radial size. The 265 is the nominal section width in millimeters, 30 is the aspect ratio, R identifies radial construction, and 19 is the rim diameter in inches. That size is part of the 2022-2026 Audi RS3 fitment group.

The low 30-series sidewall means this tire has less sidewall height than a 35-series size, even though both fit 19-inch wheels. When replacing Audi RS3 tires, match the complete size at the correct axle position so the later staggered combination remains consistent.

The first check for an Audi RS3 is the model year group. A 2017-2020 Audi RS3 uses the 235/35R19 and 255/30R19 pairing, while a 2022-2026 Audi RS3 uses the 245/35R19 and 265/30R19 pairing. All of them fit 19-inch wheels, but the front-and-rear combination changes between those year ranges.

After confirming the year, look at the tires already mounted and note which size is on the front axle and which is on the rear. That matters because Audi RS3 uses staggered sizing, so the two sizes in each year group are meant for different positions rather than being interchangeable choices.

The listed Audi RS3 tire products come from BFGoodrich and Nitto. In the available sizes shown here, the product lines include BFGoodrich g-Force Phenom T/A, BFGoodrich g-Force Comp 2 AS, and Nitto NT555 G2. All of the listed products are blackwall radial tires for 19-inch fitment.

Brand selection comes after size confirmation, not before. Once you know the correct Audi RS3 front or rear size, you can compare the available series for the kind of use you have in mind, whether that is more performance-oriented summer driving or a broader street-use balance.

The listed Audi RS3 tires are blackwall tires. No alternate sidewall treatments are shown within the available products for the sizes covered here, so the visual presentation stays consistent across the current brand and series options. That matches the modern high-performance character of Audi RS3 fitment.

For most Audi RS3 owners, sidewall choice is simpler than size choice because the real decision is not appearance variation but getting the proper staggered dimensions. Focus first on the exact size at each axle, then compare the blackwall tire series that fit that position.

The listed Audi RS3 tire series are Nitto NT555 G2, BFGoodrich g-Force Phenom T/A, and BFGoodrich g-Force Comp 2 AS. Those series represent different product lines within modern radial performance tires, and they are not available in every Audi RS3 size shown here. The 235/35R19 and 245/35R19 sizes have current product listings, while the other two sizes appear in the year fitment range without products listed here.

Once the correct axle size is confirmed, compare series availability within that exact size rather than assuming a line offered for one Audi RS3 position will also exist for the other. That approach keeps the fitment correct first, then lets you narrow the tire to your preferred road-use character.

An Audi RS3 stored on its tires should be kept in a cool, dry, dark environment away from direct sunlight, ozone sources, and large temperature swings. Keeping the tires clean and maintaining proper inflation helps the sidewalls and tread stay stable during storage. A modern low-profile radial benefits from avoiding long periods of underinflation while parked.

If the Audi RS3 will sit for extended periods, move it occasionally so the tires do not rest on one spot for too long. Owners who store the car seasonally often pair regular pressure checks with a visual inspection for cracking, punctures, or uneven wear before the car returns to road use.

Tires on an Audi RS3 should be inspected regularly, not just when tread appears low. On a staggered performance car with low-profile 19-inch tires, inspection should include tread depth, shoulder wear, sidewall condition, and any signs of impact damage from potholes or road hazards. Pressure should also be checked because incorrect inflation changes wear patterns quickly.

A sensible routine is to inspect the Audi RS3 tires at least monthly and again before any longer drive. Because front and rear sizes differ, compare wear only against the matching tire on the same axle, and replace in matched pairs when wear or damage calls for it.

Audi RS3 tires should be replaced when age, damage, hardening, or structural deterioration appears, even if visible tread remains. Collector logic does not really apply here as it would with an antique car, but time still affects rubber, especially on cars that see seasonal or limited use. A tire can look acceptable and still be past its best service life.

If an Audi RS3 has spent long periods parked, inspect the tires closely for sidewall cracking, flat spotting that does not clear, vibration, or impact-related bulges. Those signs matter just as much as tread depth, and they are a strong reason to replace the tire with the exact size required for that axle.

The listed Audi RS3 tires are modern radial road tires in the sizes shown for this model group, so they are intended for normal public-road use when they are the correct size, properly inflated, and in sound condition. Safety depends on matching the exact axle size and using tires that are free of age-related or impact damage. Wheel condition matters as well because all listed fitments use 19-inch rims.

Before driving, confirm that the Audi RS3 has the correct front-and-rear staggered combination for its year range and that the tires are evenly worn and undamaged. A performance sedan can mask problems until speed rises, so careful inspection is part of safe use rather than an afterthought.

Before driving an Audi RS3, check inflation pressure, tread and sidewall condition, and the exact tire size mounted at each axle. Because Audi RS3 uses staggered sizing, verify that the front pair and rear pair are not mixed incorrectly. Also look for uneven wear, punctures, or wheel damage that could affect high-speed stability.

A short walk-around catches many avoidable problems before they become expensive or dangerous. If the Audi RS3 has recently had tire service, it is worth confirming that the correct size was returned to the correct position, since all four tires are not the same size in the fitment groups shown here.

Appropriate speed for an Audi RS3 depends on using the correct tire size and a tire that is in proper condition for road use. The listed products include modern performance radials, but no owner should treat a size code alone as permission to drive at the upper limits of the car without considering tire age, inflation, and overall condition. Real-world safety starts with the condition of the specific tires on the car.

For practical use, keep the Audi RS3 within sensible road speeds unless the tires, alignment, and wheel condition have all been checked carefully. A staggered, low-profile setup can deliver excellent response, but it also leaves less margin for neglected maintenance or damage that might be less noticeable on a taller sidewall tire.